- 8
- 536 410
Danny Schofield
Приєднався 12 чер 2013
Bill Howard Funeral 03/15/23
This was recorded without a stand, video is a little shaky, I apologize.
Переглядів: 34
Відео
How to put a much larger battery in your Power Wheels AND still use the Factory charger.
Переглядів 6284 роки тому
Are you tired of paying $60-70 for a Power Wheels battery that only lasts 1-3 days per charge? I am demonstrate how to install a $30 lawnmower battery that lasts over a week on a single charge AND you will still be able to use your factory charger for charging this battery. Hope this helps someone wanting more power and longer run times for WAY less money.
Fastest/Easiest way to replace Front Struts on 2008 Nissan Armada Infiniti QX QX56
Переглядів 79 тис.5 років тому
You can replace your front struts on a Nissan Armada with very little experience. You only need a few tools and know how to turn a wrench/use a jack.
Video 2 of 2: 1976 Chevy Vega RARE Garage Find with 2,078 Original Miles. Will be for sale on eBay.
Переглядів 16 тис.6 років тому
This is the sencond video showing the car running. I am selling this ALL ORIGINAL Vega with ONLY 2,078 Original Miles. I have all the paperwork from the dealership when purchased new in 1976, including the purchase agreement and extended warranty that was purchased with the car. This car will be sold on eBay in the next week or two. Thanks for looking!
Video 1 of 2: 1976 Chevy Vega RARE Garage Find with 2,078 Original Miles. Will be for sale on eBay.
Переглядів 26 тис.6 років тому
I am selling this ALL ORIGINAL Vega with ONLY 2,078 Original Miles. I have all the paperwork from the dealership when purchased new in 1976, including the purchase agreement and extended warranty that was purchased with the car. This car will be sold on eBay in the next week or two. Thanks for looking!
How to Debaffle stock pipes exhaust on Suzuki Boulevard C50
Переглядів 408 тис.10 років тому
How to Debaffle the stock exhaust on a 2006 Suzuki Boulevard C-50.
1991 Nissan Skyline R32 Type M REGISTERED For Sale
Переглядів 3,4 тис.10 років тому
1991 Nissan Skyline R32 Type M REGISTERED For Sale in Oklahoma. Very Good condition with extremely low miles!
1938 Ford Panel Truck for sale on eBay
Переглядів 3,1 тис.10 років тому
1938 Ford Panel Truck for sale on eBay. 12-29-13
Next show us how to get rid of those teeny tiny saddlebags you got on that thing. They look like cellphone cases
My car makes noise when I hit bumps. It keeps shaking for a little bit and makes my wheel move. I will do this and hope it fixes it.
Same if you have 4x4?
It took me forever to do this. The plate was easy to remove but on the newer models there's a thicker weld on the inside baffle. I just rode around without the plate for a while. I would wiggle the baffle occasionally. One time when I was riding the lower baffle came out while on the road. I didn't see where it went. The top pipe was still baffled, a few months ago I saw that it was very loose but the flange was still hung up on the inside. After wiggling it and using pliers I managed to get it pulled out. The bike sounds a lot better. I still would like to get new pipes put on at some point.
Thanks for the help this video saved me from doing other stuff that I didn’t need to do
This is great and all, but what am i supposed to do if the top nuts are so badly rusted that they won’t accept any sockets I put on them?
I thought I was gonna learn something new. This is nothing new and old school.
Something new in a 5 years old video???😂
And doesn’t this screw with your fuel injection / fuel to air ratio and make you bike run horribly
No… it’s just baffles. It doesn’t remove the catalytic converters further up in the pipe. All the baffles do is make the bike quieter. If it fucked up your fuel ratio and makes your bike run horrible, what do you think happens when you put in aftermarket open exhaust?
Would this be the same for a 4 wheel drive 08 Titan?
Thank you very much very helpful video may god bless you for sharing this how to do it yourself video 👍 great video .
Thank. I just did it today. Only thing 2nd bit 1. 3/8 inch. Thanks for help
❤❤❤❤❤❤❤
What kind for saddlebags are those..? They look sweet...
Never seen a red interior on a Vega! Wow what a find!
How did you combine the bits??
Just came across this video. I am curious if you had to mess with the fuel/air at all when taking the baffles out?
It’s EFI. It will automatically adjust b
Thanks for the video. I followed your advice about the dual hole saws and it worked great! Sounds a million times better now too.
A urine therapy to make good bike worse. C'mon! get normal pipes and a fuel manager!
After watching another video on a person who changed his stock pipes and air filter doesn't mean your bike is going to run faster or give you more horse power, all your bike is going to do is make more noise. In fact you could be losing horse power because your bike's computer isn't programmed to the modifications you did to your bike. The other video the bike was put on a dyno and it's computer was reprogrammed to run with the new modifications.
Thanks for sharing that Chevrolet Vegas were in production until 1976. This is a beautiful example.
Actually, they were production until '77. Beautiful cars.
I'll be doing this very soon
Time capsule! Wow!
I have mi armada se 2007 the regular no 4×4 end i replace new , but the one i put is for 4×4 end is now litle hide un poco alta , cree que tenga problemas me quedo un poco alta con esos de 4×4 se lo agradecería
90% of the commenters don't realize the '76 Vega had Toyota-like powertrain durability and it's ride, handling, highway directional stability qualities with steel belted radial tires were superb.
Hi I want to do this to my wifes bike, however how did you stack the hole saws? I cannot get both to secure on the arbor?
Exellent video
I am curious: What decibel reading do you get after removing the parts?
What model of jack stands and lift are you using?
I did the same thing but shoved two cherry bombs in with some titanium tips! Really nice sound!
Wow, what a gem, I had a 75 Vega, 3 speed, wish I could have had a chance to buy this one.
Здравствуйте.непропадает ли мощность? глушитель имеет сопротивление.нужно настраивать компьютер после этого?
Kool budget mod tank u!
Where do I get spare parts from?
There is a guy in Oklahoma City that has tons of Titan/Armada parts. His number is 405-549-4036. His name is Larry but he goes by Mr. Titan. Tell him the F-Body guy Danny sent you. 😎
Nice time capsule but, should ONLY be a trailer queen. This car is one of the worst car ever made by GM of in the USA. I remember them well, in my high school and college years. They were forever having serious mechanical problems. Good for just show and an example of how the car could have sank general motors. Also an example of shoddy American workmanship at its worst.
I caught what looked like a rust bubble at beginning of video when he opens the door in the upper right corner of the door insert.
Is the Master pro any good compared to bilstein 5100?
Blistein is definitely a better brand, I don't know if they sell the strut as an assembly like the Master Pro. I did have to swap one of the Master Pros a year or two later, they warrantied it out though.
@@SchofieldRacingBilstein doesn't make the whole assembly, but I don't like quick struts. I have a 2010 qx56 and all of the shocks and springs are bad. Both bags are busted in the rear and the compressor doesn't work, but I'm doing the conversion in the rear with Bilstein. I might just use new springs from rockauto. For the front the springs have to be compressed to install the Bilstein or I might just get the complete Kyb complete struts from autozone, but I still think the Bilstein is better. It just takes more time to install. I put some kyb on my Lexus in the front and they are bad now. They lasted maybe 2 years and that was oem replacement. I think strutmasters might make the best quick struts for me but they are kinda expensive.
Makes me wonder why the mechanic didn't offer me the option of just replace the Coil spring ( Which had snap off) with replacing the whole assembly with a quick strut. Especially with the cost of a quick strut compare to a Coil spring(from VW) - wasn't cheap for sure. Especially with the amount of money I spent. Next time I will ask..This one seems easier than doing a VW Jetta for sure.
Incredible find 👍🏻🇺🇸
You will have a hard time finding an air filter for it, it is all one piece. Start looking now
I am so surprised about the seats didn't have butts marks in the driving seats
Aluminum blocks. LOL.
Hey Boat, make that 50K
Bad cars.
I had a 1974 spirit of america Vega hatchback. The engine basically melted (seized up) at around 12K miles.
I’m under the impression taking baffles out is no bueno…?
Exactly what I needed! excellent video, short sweet and right on point ( :
Do I have to get an alignment after the front struts and shocks replacement? Thank you. Great diy video.
No alignment needed unless you already had an alignment issue. You are not touching any of the steering components by doing this.
@@SchofieldRacing thank you 😊
NIce vid Thx. May I ask how you stack the two hole saws together? because it seems imposible for me to stack them for drilling all at once. Thx
The bit I bought had just enough room to add 2 bits. Seems like it was Milwaukee from Home Depot.
@@SchofieldRacing After searching, I think I should buy a so called "Bi-metal Hole Saw" which I can stack two saws fine. Thx bud.
Hey Danny, is there any special modifications to combine the hole saws together?
The bit had just enough space that I was able to screw both on. Obviously the biggest one first.
Good day, love the video! Can you please tell me the name of the hard saddle bags you have? They look amazing. Thank you