Відео

Thanks man!

Thank you! I was struggling to make it work with the sound of the bell. Now I know!

My situation is not same as yours but maybe if you try applying same method as I do maybe it helps you out in some way. Basically I applied grayscale filter from Accessibility menu in settings. It sounds very simple but it makes the phone SO DULL that not only do I don't want to touch it, but when I do i feel disgusted at how bland it is thanks to the grayscale filter. I feel it greatly combats all the dopamine excitations that OS and apps have to keep you hooked. Additionally on iPhone I use notification summaries to schedule when notifications arrive to me which has greatly contributed in me not losing focus while doing important work, while not losing out on stuff like contact with people. If you wanna go extreme on Android, use the 'Reduce Motion' feature and enable developer settings and put all animation transitions to 0x. That way there will be almost no animations which will help the dopamine detox. Personally I don't go this far because some apps look weird or broken if they rely on animation too much. Also, in certain situations I do need colors so I have activated accessibility setting that when I slide with two fingers from navigation bar that it activates or deactivates color. It helps out when I want to use camera or at times when I want to see a photo or video in my gallery.

You could try a cellular apple watch.

That NTG is a bit more crisp than the Wireless Pro. I sold my NTG cause I used it for VO but it picked up a lot of water in my mouth in the highs so I thought I should get a PodMic for VO, now I kinda wanna get my NTG back lol

Ha! Legend. Incredible that there is a video specifically for this. Thanks a lot.

thanks Bill...so Grateful!

Thank you so much, very very helpful!

I love Descript for the "Studio Sound" audio correction. Works great for getting rid of wind noise and car noise.

Thank you! Very helpful.

Damn , tysm , I have test tomorrow and I did not understand how to make a diagram, you made it simple❤❤❤❤❤

Thank you. This is so helpful 🙏

I had the same problem and found your video. Thanks for the heads up on using the USB detected sound device it works. The issue with that is it records at a much lower volume. I found a solution. In preferences I had to set "Monitor Out" to something (I used my headphones) instead of "No Output Selected". My mics showed up right away after that.

Great video! Do you know why the "water bottle" word is off the screen?

With windows... All you need to to is: Open 'Device Manager' via your start menu Scroll down to 'Sound, video and game controllers' Right click these drivers and select Disable. intel smart sound technology for usb audio intel smart sound technology for Digital Microhones Unplug microphone from computer, then plug back in again.

Hey - If anyone else is having a problem with Rode Connect and no levels - try going into your Mac Settings under Privacy & Security and then Microphone. Make sure that the Microphone is enabled (green toggle switch) for the Connect app.

I was running into the same problem, everything connected, microphones showing up in rode connect but no signal. The same was true for system audio. What did the trick? I had to go to my Macs privacy settings and enable microphones for rode connect. That worked for me.

Legend! Just what I was looking for. Thank you

Thanks. Very helpful.

I have similar problem with a Rode NT USB +, firmware updated, latest app version for Windows 11, the app when opened, will change the default device, but nether way: if I monitor I only hear a robot voice, even the sound effects sound robotic, or also it could be not sound at all. It is super annoying because the mic works great with OBS. Im trying to figure this out but there is no info about these kind of annoying bugs

I encountered the same issue... First of all, I thought it couldn't be solved, because the relevant information on the Internet is too limited, but then I found out that the transmitter has not been updated to the firmware! Based on my experience as a reference, we usually only use the receiver to connect to the computer for update and use; in fact, the transmitter is not updated synchronously, so I connected the RX and TX to the computer through USB-C one by one to update the firmware After that, the issue is ruled out. Hope this helps you guys.

The Same Issue i hope they find out any way 2 fix it

Nice little project. Great way of explaining the code !!!

ye, Ivy, I have the same situation you describe with my new laptop.

I just bought a new laptop. There is no original sound on in my recent downloaded zoom. Not sure why. It does have original sound for musician only. No other way to turn on original sound....on. Do you know why. Cannot hear my bell at all when I attempt to ring it in a meeting. Does anyone else have this issue?

I have been playing around and need to get someone to listen on the other end again.... But, I am wondering about the options under what is now "original sound for musicians" such as high fidelity, echo cancellation, stereo audio. Is there something optimal for those? Also if you are going to ring the bell then read a quote or speak before or after the bell, are you toggling between those in thos few seconds or only turning it off after the meditation has begun and presumably you are muting yourself altogether. Thanks for this video; it is great.

AND JUST AS I SAY THAT IT WORKED!!! i have updated rode central again to V2.0.16 on Mac. Both my Wireless go2 Mics and Reciever are on firmware v2.2.3 i updated this also this morning. I then went back to Rode Connect and on the main screen top right where the 3 dots are i clicked on Set Up assistance and both Microphones from the Wireless Go 2 appeared to get dragged up into position. I did have both wireless microphones hard wired in as i was doing this

having the same issue i think i have spent enough time wasted on trying to figure it out and will just delete rode connect!! cheers buddy for this video

This was super helpful. Would love to see more of these code walkthroughs with RealityKit and SwiftUI please!

Hi, having the exact same problem and wondered if you got it sorted out ?

Is this video helpful? Too long? Too boring? Lemme know 🕶

I see that probably one of the Rode devices is connected via USB-A<->USB-C adapter. Dos the adapter make a difference?

Thank you

I have exactly the same problem on one Windows 11 laptop with AI-Micro and VideoMic Go II. On one laptop both devices work, on another laptop they do not. ua-cam.com/video/CDPiKYu9j7A/v-deo.html I have ruled out power supply problem. I have built USB adapter that supplied power (5V) from external, laboratory-grade power supply. Adapter was plugged between the device and laptop. It made no difference. I guess it is a software driver problem. Rode should be aware of this issue; I opened a support case 409383 a month ago. No solution yet.

Same problem on my M1 macbook air, Monterey

this thing has no presets?

Last 20 seconds unclear...do you mean for Original Sound: Speaking=OFF, Bell=ON? It sounded like you said use OFF for both.

I really appreciated your video help but sad to say, even with my original audio on, my meditation bell still sounds just like a thud. I am using the PC (Lenovo) speakers, but even when I try using an over the ear mic held up to the gong, still a thud, no matter if original sound is on or off. I might have to try a better mic like the one you demonstrated (or the newer version), but I don't know if that will correct the problem? Appreciate any other thoughts, thanks- Linda Rose

this is such a great video, I think I just felt in love with this box

This was super helpful, thank you! I think I might get that mic you have - it sounds amazing! I also played around with changing the suppression setting from AUTO to LOW and I can keep the OG sound OFF and still hear the beautiful sound of the bell. Namaste, Amy

Cool demonstration! I’m torn between the Mega FM and Digitone Keys. It seems like the Mega FM has a certain character that only the YM2612 can offer. Futuristic, crunchy, but also nostalgic! Do you think this sound can be captured on the Digitone Keys with pedals that can color the sound? Maybe something similar to the Chase Bliss generation loss, light distortion, etc. Just feel like the Keys offers so much more, but what the mega fm does is just so well and stands on it’s own.

Go back to neck cracking, my guy. You are up for that.

I don't understand the "detune" slider. It works only on the ch3 mode but 10% of the zone of teh slier seems to change the sound... any tips ? I found the owner's manual cryptic too... :(

helpful. tysm

I know exactly what you're talking about, I avoided hardware gear in general for a long time, then I went into Eurorack and nowadays, well, I upload on a weekly basis and it's the utmost fun I have doing music since ;)

Variety in repetition, this is a great musical miniature.

Really cool two videos of the megafm! It would be awesome if you keep posting videos of the megafm!! Maybe three or four operators?

It's such a gorgeous sounding synth, huh?! :)

Very smart video. Will you move to two operators in the next vid? It’d be nice :)

helpful