Відео

What error you are getting in code.

It shows keypad .h error Liquid crystals_I2c error Even after installing all libraries

code uploaded but not working when i plug power after uploading code the buzzer sound continuous but no action

kindly reply

Yes each song need its own sequence.

Its normal electrical wire called 23/76.

I will try.

@@clickthatmoment3062 ok

For normal distance use jumper wires and for long distance use cat6 ethernet wire.

These are not waterproof and if you are using relays than you will use normal light strings and there is different settings for pixel leds. You can purchase any arduino and relay for this project.

​@@clickthatmoment3062 what about the wires

Yes the arduino will always be connected to computer. As the sequence is played in vixen software.

ok thank you so much

Yes you need a fm transmitter for the people in cars and put a small speaker for the people on foot.

Hello, thanx for watching. Yes it will work but IR motion sensor sometimes gives false detection if doesn’t affect your project than go for it. If it doesn’t work let me know then we will see another solution for it.

I am glad that my video helped you. Are you using mechanical relay if so than listen for clicking noise if it is making that noise that means it is turning lights on and if it is not making that noise that means relay is not working if you are powering relay directly from arduino try using external power supply sometimes there is not enough power for relays from arduino.

Thank you! It is mechanical and no I’m not hearing any noise. I’ll try an external power supply and will post my findings. One more question regarding the power to the bread board. In the schematic could you show how the Arduino and bread board are wired? Sorry, I tried to follow the video but I don’t think I did it correctly.Thanks for the help

I had two things wrong. I had the relay wired to vcc not jvcc and ground. It gave me power but wasn’t actuating the relays. I also disconnected the ground from the relay to the mega and everything started working. Now comes the hard part of getting props made and wired.

This shouldn’t be happening whenever arduino glitches it is mostly due to unstable or improper power supply. Did you powered your relay from arduino or from external power supply if not try to power it from external power supply and check your relay for any damage or current leak from high voltage to dc side of relay. Or try changing your relay module.

@@clickthatmoment3062 I am using a USB charger to power the relays. do I need to use a power supply to power the relays?

In my case i didn’t get any noise i have use 15 meter long wire you can use high quality cat6 wire which is outdoor rated. Or you can add a capacitor on power line of relay to filter out noise. Use external power supply for relay. And another separate supply for arduino. Check your arduino if it is working properly or try replacing your arduino.

I haven’t tried it with xlights so I don’t know if this will work with it or not.

Its already opened anyone can view it.

Some sensors or led won’t work with long wires due to voltage drop or fluctuations they are very sensitive to them. You can try to put a capacitor on power supply wires.

Help me brother

I didn’t understand what you’re trying to say can you elaborate it more.

I am using an old laptop with Pentium dual core processor 4 gigs ram, 128gb ssd - works smooth

Yes I am using home assistant. For my server I am using a COMPUTER without a cabinet I had just screwed motherboard in a wooden box. In my opinion a second hand cpu is best for home server as it is more reliable and if something went wrong parts can be easily replaced unlike raspberry pi you need to throw whole thing away.

Are going to implement esphome setup. In that case ESP devices are pretty reliable as soon as you configure them in a right way. Esp8266 had 8 GPIO pins but you cant use all of them there is a datasheet which tells you which pin you can use. If by mistake you used the wrong pin the whole device crashes and does not come online. I am using this setup for almost 10 months now. And it is pretty reliable as soon as I do not configure it wrong.

@@clickthatmoment3062 I bought one esp8266 and 8 channel relay, i am using D1-D8 pins on esp8266. actually i am planning to buy more like 3-4 such combos, i don't know which one is better like PCB boards where everything is connected except power supply or the ones like you with jumper wires.

​@@clickthatmoment3062 I am currently having esp8266 with 8 vhannel relay module. I am using D1-D8 pins. I was thinking to buy more of them but i don't know which one is better approach- like having pcb boards with relay and esp on single board or having them seperate with jumper wires like you have. Let me know if you have suggestions

Its on your choice if you want a clean setup you can go with pcb design and if you are ok with wires you can go with separate esp and relay module but make sure D8 creates a problem while esp is booting up and because of it esp stuck on boot and never boots.

@@clickthatmoment3062 Ah yes, i experienced this few days back, i wasn't able to know the cause that time, thanks for informing, i was stuck many times because of this D8 pin and used to get error while flashing

If you have multiple arduinos each arduino will have its own COM port just name it differently in vixen for example: if you have two arduinos one controlling house front and second grass name them house front controller and grass controller. And if you want pixels on each arduino pin that is not possible because arduino have very less memory to barely controll 300 pixels.

Yes it is sending data continuously to the arduino to run the show.

Thanks so much 😊

I have used 5v relay you can use whatever you want. But give relay external power do not power them using arduino on board power supply.

On ethernet like you want to control arduino with your pc using ethernet wire

I am unable to understand what you are trying to say and google translator does not helped much. If you can speak english please let me know.

Whats the problem you are facing.

@@clickthatmoment3062 ich bekomme das mit den code nicht hin hatte alle kopiert aber es geht leider nicht

@@clickthatmoment3062 würdest du mir den code fertig schicken für 150 pixel habe ich über Email?

Yes you need to make some changes to the code.

No I haven’t installed linux this all worked on a windows laptop you can watch this video of setup hope it will help you ua-cam.com/video/Syi-J3_vcFY/v-deo.htmlsi=0xVtDmUswIcm0xGg

No timer will not reset but relay will turn off.