Відео

Yes, the Hitch Clip should be anchored into a truss or rafter to ensure stability. To locate a truss, we recommend using a soft-faced mallet to gently tap along the roof. Listen for a solid sound, which typically indicates a truss or rafter beneath. Alternatively, a stud finder can also help accurately locate trusses through roofing materials for a secure attachment. Feel free to call us at 800-859-4077 or visit our site at bigrocksupply.com for more information.

Thank you for your concern. We’ve tested the product with multiple members of our team and if used correctly, the finger guard is effective in preventing injuries. Be sure to hold the Everhard Knife and Shear Sharpener as shown in the instructions, keeping fingers behind the guard and thumb securely on top of the handle while pulling to the knife point, straight along the blade with minimal pressure applied. As always, use caution while storing and working with knives and shears.

The recommended fasteners for the Hitch Clip system are six (6) #10 3 1/2" Grip-Rite Construction Screws or equivalent, as determined by a qualified professional. The screws should seat flush when properly installed. For more details on proper installation, please refer to the instruction manual which you can find on our website at bigrocksupply.com, or give us a call at 800-859-4077 if you have any further questions.

Thanks for your feedback! We appreciate your understanding as filming on a commercial roof can sometimes present challenges like wind noise. We're always working on improving the quality of our videos, and we'll definitely take this into account for future demos. Thanks again for watching!

Great question! The roller being used in the video is called a Steel Radius Roller. Specifically, it's the 2" x 2" Steel Radius Roller, which you can check out here: bigrocksupply.com/2-x-2-Steel-Radius-Roller. We also offer a variety of other steel rollers for different applications. Feel free to explore our range if you're looking for different sizes or options at bigrocksupply.com, or give us a call at 800-859-4077.

Hi, thanks for reaching out! The chest strap on the Series 1 Guardian Harness uses a 'pass-through' mechanism, This is the metal piece in the middle of the chest strap. Also referred to as a mating male and female pass through buckle. "To connect Pass-Through Buckle, angle male buckle so it is positioned to pass up and through female buckle. Fully insert male buckle so that it lies at on top of female buckle.... Adjust chest strap height to lower chest level, approximately 6” from top of shoulders. Connect chest strap. Ensure there is no twisting of webbing." This is directly from the manufacturer instructions. If you're still having trouble, feel free to visit our website at bigrocksupply.com or give us a call at 800.859.4077.

Thank you for the comment! Yes, we do offer a Pipe Prop model that is Miami-Dade County approved and suitable for hurricane zones. The MDA version is sold as a kit, including 4 saddles, 4 bases, 4 stainless steel straps, and 2 tubes of MDA 1000 adhesive. For more details, you can visit our website at bigrocksupply.com or give us a call at 800.859.4077.

Hello Carlos, thank you for your comment! Unlike a manual pallet jack, the Tuff Jack is motorized, so it handles the heavy lifting and moving for you, which is especially useful for moving 2000 pounds of materials. It’s also designed to work on roofs, where pallet jack wheels wouldn't perform well. If you have any questions feel free to visit our site at bigrocksupply.com or give us a call at 800-859-4077.

Thank you for the comment! The Ridge Pro is not recommended for use on tile roofs. However, we have a great alternative for you. The Chicken Ladder and Ladder Hook from Acro are suitable for use on tile roofs. If you have any further questions or need more information, visit our website at bigrocksupply.com or give us a call at 800-859-4077.

Thanks for the comment! We're glad you enjoyed the video.

Many consider him to be the James Bond of Safety Railing😎

This is a 12,000w generator that has a 15-gallon tank with 9 hours of full-load running time and 14.5 hours of half-load running time. If you have any questions please give us a call at 800.859.4077

We appreciate your question! The 4040 and 4041 are very similar tools. The difference is the Maximum Bending Height. 4040: 32mm 4041: 40mm If you'd like, you can give us a call at 800-859-4077 and we'd be happy to provide more information. Or, you can view our entire WUKO offering here: www.bigrocksupply.com/Wuko-Metal-Bending-Tools

Hi, thank you for the comment. The Garrdal pipe flashing system can be used on a roof pitch from 3/12 and steeper. If you have any more questions please give us a call at 800-859-4077 or Visit our site at www.bigrocksupply.com

Hello, please refer to page 15 on this manual: www.bigrocksupply.com/Shared/Documents/TDE/TP-Series-Owners-Manual.pdf. Feel free to reach us at contact@bigrocksupply.com for any other questions.

@@bigrocksupply Yes, I see that but the belt is not on the ladder side. putting it over the motor side is easy... It looks as if it should have came installed on the ladder. Thoughts?

@@cmyskill5272 Has your issue been resolved? If not, give us a call at #800-859-4077 for further assistance.

Hello Calvin, thank you for your comment! We’re curious to learn more. Could you kindly elaborate on how you used the fall protection harness to pull a tanker? We appreciate your insights!

Thanks for leaving a comment. The Freund Hand Notcher 35 can cut all sheet steels up to 22 gauge, including stainless steel.

Angel, thank you for the purchase! Please tell others about your experience here: bit.ly/BigRockSupply-Google-Review

Definitivamente una de las mejores para ese tipo de trabajo 💪

You're welcome!

The HitchClip can be used in a permanent application if installed per the manufacturer's instructions. Installation location must be selected and deemed compatible with HitchClip by a Competent Person. A semi-annual inspection of the anchor, substrate, and installation is required in all permanent applications. The HitchClip can be flashed over, we feel the minimum is to at least caulk over the fasteners.

We’re unsure what brand of silicone is being used as a top coat in the video. GreenSlope can be top coated with any brand of silicone or elastomeric coating.

Hi Hector, the choice of what bracket to use is not based on how much strength you need but on the size and geometry of the rib that is being attached to. Do you know what profile panel is being attached to or have a photo that you can send over to contact@bigrocksupply.com?

Hello Mark, are you looking for anchors that go under roof tiles?

SAFEWAZE Steel Anchors are designed for use by ONE person with a combined weight (clothing, tools, etc.) of not more than 310 lbs. (140 kg) Make sure all of the components in the system are rated to a capacity appropriate to the application. All SAFEWAZE Steel Anchors are rated 5000 lbs. (23 kN). (See the instruction manual for more details) www.bigrocksupply.com/safewaze-sw900-parapet-wall-anchor.aspx Two units would be used in a 100% Tie-Off application.

@@bigrocksupply o ok thanks

Yes, the TriRex design allows for use on concrete. As long as the cart is being used in accordance with the manual. While on bare Concrete, the cart must be derated per the manual. More information: www.bigrocksupply.com/AES-Raptor-TriRex.htm

@@bigrocksupply so you are not allowed to work next to the leading edge if you are on the restraint

@@Emezepe3 Fall Restraint sets the system up so that a user does not have enough cable or rope to physically go over the edge. Please take a look at page number 15 on the user manual: www.bigrocksupply.com/Shared/Documents/AES500/TriRex-2020-Instruction-Manual.pdf

Hola Marco, en nuestra pagina de internet podras encontrar el manual, hoja de especificaciones, y mas informacion. ↓ www.bigrocksupply.com/Winco-Big-Dog-WL12000HE-12000-Watt-Generator.htm

Hi, we would be happy to help you, are you able to send over some information on the application you need to use it for?↓ www.bigrocksupply.com/contact-us Thank you!

One appeal is that it works on shallow pitches. The other day I needed to hang a ladder from a peak which had a shallow pitch and wide Ridge cap. The standard hook did not work, so I was able to lift a shingle and drill in a jack. On half the houses, the shingles rip. So, drilling at an inconspicuous juncture and sealing is essential. After sealant, I add a layer the gutter rocks to protect the caulk from the sunlight. If no rocks, I use black beauty, which are black rocks from a black shingle used for sand blasting. I carry around a pill bottle full of it. I have dreamed of cutting an aluminum nail a half inch from the head. Gooping up the straight part of the nail and shoving the plug a half inch deep, then filing the rest with lexel, amazing goop, or silicone, then the rocks. The idea would be to eliminate the resin shrink factor. It is important to point out that windshields do not leak around the perimeter 40 years after the install. So, these tiny hole filling should do the same.

Yes, give us a call at 800.859.4077. Thank you.

Please select a sealant that would be the most appropriate for your particular roofing project.

I only bring this up because i just got nailed a month ago for pushing a ladder and hook up the roof n because i didnt have 3 points of contact on the ladder n got shut down

3 points when you're ascending or descending. If you're stationary only 2 points are required.