Відео

I actually don't get how this got trademarked in the first place but I just discovered that the Monitor+ app has it if you long-press on the False color icon

thanks, insightful

Cool thing with the EL Zones! I was always wondering about the false colors of my Blackmagic.. it seems like the range from red to purple is some kind of safe zone?! And one could still go a bit higher or lower with the exposer and still get information out of it. Because when I turn it off.. I sometimes see that nothing is clipping and that the information is there. Also when I put the footage into DaVinci. So I try get my middle greys close on point and the rest is for the edit. A thing that works if you a one man show.. but in a team.. I'm interested in the EL Zones.. could one make a LUT with the EL Zone?

Thanks man

I subscribed, you too

You can use only 32GB on zoom h4n :)

I have been saying this for years. The lame one size fits all method of false color on most monitors is seriously broken. Proper monitors like Flanders Scientific have the ability to customize the levels and colors used. While it may have been exciting to get false color the pathetic version we got wasn’t even really setup for log. Most were designed to work around rec709. It’s just not a very good or accurate tool. We needed either EL Zone or monitors to low is to customize what we use. I may even make the argument that sometimes customized may be better than EL Zone because we can set it up to cover the areas we want. Instead of looking at 12 stops of color maybe we only need to see 4 to 6 colors for the stops we care about. Alas companies outside of SmallHD and Flanders do not seem to want to give proper flexible false color support.

Does Ninja Ultra count as an expensive monitor? I am looking at grabbing one for my R5.

The Magic arm is the coolest, creative shot inducing, cost effective camera mount. Good video.

At least for the fluid head balancing I'd suggest a Short Tie Down Handle, they're also great for HI Hats. I agree with the shaking, you'd need a higher end rig to reduce the shaking to make stabilization in post work, otherwise its a great mad max rig. I personally do not trust ball heads with that much weight as in my experience they tend to give out with anything over 5kgs, let alone with additional gravity forces being put onto them while the car is moving. I personally prefer more dedicated gear heads. For safety most higher end rigs have ratchet straps, which would work far better than some rope or bungie cord IMO. For creative purposes I'd say it works fine and is a pretty natural look to the images when side on and the car slower would match a melancholic mood. Thank you for the indepth review and your experience with this car mount. It's far better than the old one my uni had.

Does your camera have IBIS?

Nice, I think also maybe cranking the shutter and then stabilizing in post (and maybe adding in some subtle motion blur) could also help with the shakes

This Car Mount sadly isn't currently available. When it does return to amazon there will still be a link for the product in the description. Sorry for the inconvenience.

Starting to invest more in my audio kit thanks for the informative info 👍

The BMPCC 6K false color readout can be made to match the Resolve FC readout in two different ways. If you use the Camera Specific setting, as you're doing it in the video, the image in Resolve has to be in log and apparently under 800 iso, but you can also set the FC readout to "Creative" and then "Exposure Guide" and provide it a Rec 709 normalized image. This mode will match the FC readout on your camera, regardless of what camera you're using, because this mode reads the normalized values. The BM cameras internal false color always reads the log signal. Also, every Alexa before the Alexa 35 puts middle gray at 39 ire, only the Alexa 35 pushes it down -- the Blackmagic pocket cams are at 40 ire so extremely close to the original Alexa line.

problem is that not al camera manufacturer have jumped in EL Zones. Blackmagic hasn't yet . Even thought I own a Smallhd Monitor Cine5 I am not able to use EL zone in the poclets

I think different cameras clip at different IRE levels too (like the S5II clips at 93 or 95 or something supposedly) 😩 I don't really use false color anyway though I'm a noob that uses zebras 🤷🏻‍♂ lol Might be a dumb question but when you were comparing the footage false color in Resolve vs the pocket camera, when the Resolve's false color showed it "wasn't" clipping, was the footage itself actually clipped though where you couldn't recover the highlights/shadows? Because that'd be even worse if not only does the software show a different calibration but that it could be saying something isn't clipped when it really is 🤦🏻‍♂

Can you say "howdy partner" on your next video

Keep posting Kevin… you’re really going to help me upgrade the quality of my content!

There's hella shotgun mics that are better solutions than either of these just saying

Sigma has EL Zones built into their fp range with the latest firmware... But one annoying thing is that you have to hold the button to keep it showing...

Hi do you have a link to the exact two products - Im going online but there is a confusing amount of variations - thanks for your help.

Try setting the monitor to native as opposed to rec 709 etc.

Pretty sure the reason for missmatched false color between davinci resolve and the camera is because the cameras false color is uncompressed and unprocessed... in other words its not reading from a recording, but instead a live view of the image. More specifically, differences in the false color then are probably because the detail was already "lost" during the recording and isnt going to be "lost" again. When something is clipped or crushed in digital imaging, the camera typically still knows the luminance(voltage) of the missing information. For instance, something that is being measured at -3 IRE by the camera will be discarded and become 0 IRE. Likewise, something 113 IRE will become 100 IRE. Also, the false color in davinci resolve is probably meant to tell colorists how their color grade is affecting the image, not nessesarily the detail gained/lost during recording, so it makes sense that it would get slightly different results. This is, to my understanding, how this works, although keep in mind I'm not a camera manufacturer or designer so these are simply my best guesses.

Ran into the same issue. Not sure why Blackmagic has not addressed the issue. Cinema camera 6k doesnt even show up in the false color selection.

I have been so frustrated with FC in camera not matching up in Resolve. I am hoping 19 updates it.

What is the big deal about getting it spot on in camera? The cameras you use have LOADS of left over dynamic range to make the minor adjustment in post with imperceptible impact on quality. And as for clipping, just go and check with the eyedropper tool and read the values in the "clipped" areas to see what the camera/monitor are considering to be clipped, and you will see which one is wrong.

Life is definitely a lot easier with a tripod with a bowl head. I fought adjusting legs for too many years before buying a setup with a bowl. I have the Sachtler Ace XL Fluid head on an iFootage Wild Bull T5 tripod. It's been a pretty good setup for me. The 75mm bowl with a leveling bubble is almost a necessary luxury in my opinion. I'm not going back!

good to see UA-cam give smaller channels some exposure. good stuff. great video. I own many magic arms, but NEVER knew that Manfrotto had a longer heavy duty one! I'm about to snag one now!

Great video! (your video arrived in Brazil)

Great vid! Thinking about getting one as my SmallRig ones are quite small.

Great shots! You can get some great shots with a GoPro as well.

Kevin, use the cage an 2 manfrottos arms + clamp, its the way to go