Відео

@@icywaffle1446 it was 1000, but someone unsubscribed ):

Congratulations you have 1k subs

@@Чаго-ъ666 💯💯💯 enjoy!

@@ShreyashSutar-h5y thanks! Unfortunately I don't have that model. But I have a couple of other new Ferraris with videos coming soon!

@@alichoy412 thank you! Yeah the details are lovely on this

Hi, great to hear (: Yeah the little knobbly bits on the stock tyres will wear very quickly but the actual traction is fine. I don't actually recommend these tyres I bought in this video, they're not as good quality as the stock tyres. I am yet to release the video where I put another set of new tyres, this time same as stock. (I managed to blow a tyre on this set in the video) I bought them from model sport. Search for FTX vantage and click on spares. Don't buy the fastrax ones. Cheaper plastic. Different width and cheaper rubber and glue. Thanks for watching (:

?

@@Maff_71 I still run it today sometimes, absolutely love it. What colour will you get? Thanks for watching (:

@@cussani honestly not too much, have a look on eBay for prices. I bought mine quite cheap at like £16 but I've seen some sell for 25

@firewaffle1 thank you!!

@@wydoqgames thank you so much! I have done probably all the mods I can for this car so hopefully the next mods will be for the Lego technic ford gt (:

@@firewaffle1 nice! I'm gonna subscribe so I can see your videos!

@@wydoqgames thank you! It will be a while before I get the ford gt done

@@firewaffle1omg im so jealous cuz of how good the land rover looks omg lol

@@firewaffle1I added windshield wipers to the front and back of mine, there was only space for 1 on both rear and front so i could only add 1 to each.

Thank you!

Not hugely expensive but I was just lucky to find this one in good condition for a fair price. Maybe auction it on eBay starting at a reasonable price and it might go up. Don't take my word for it though, the market and the way the auctions work is very random.

@@firewaffle1 Thanks for the reply!

@@_P4NDA perhaps! Just a bit expensive

@@Yanzo_Mclaren Yep 😁 Enzo I actually got the other day as a gift car and it's so much fun to drive Waiting for the next update on 25 July and I will buy 3 more 🤣

@@crischanlariosa6185 Which one? The RC car you can buy a gray body shell for I think. I bought my car from modelsport.com

@@afrog2666 🤣🤣👍

That makes a lot of sense, thanks a lot! Will probably try this next then. Yeah I found the parts online for like £10 so not too bad but it is fun to mess around and prototype things (: Thanks for watching and commenting!

Yeah PLA is all I can print at home. I used to have access to a printer that could print PA-CF (carbon fibre reinforced nylon) and that would have been ideal. I'll see if I can still print on that one. If not, I love the idea of using steel inserts, thanks a lot! However the part broke at a place where it would be hard to put a rod through so will need to think about it carefully. Will definitely be looking to continue and improve on this project so will look into your suggestions. Thanks for watching and taking the time to comment (:

@@lewismadden8438 hi there I use Fusuon360. You can get a free trial or get a free subscription as a student (:

@@firewaffle1 thank you much appreciated unfortunately I'm not a student

Free trial will give you 30 days or something, not sure what else you can do otherwise /:

What do you mean? PLA is definitely not the best plastic to use but I wasn't able to print with any other material.

@@autonoob yeah that would definitely be a good thing to test! Definitely space to reinforce the weak spots. Currently working on other projects now but if I come back to this one, will try to update the model based on your comment (: Thanks for watching and taking the time to comment.

@@firewaffle1 I have big plans on breaking my rustler soon so your r&d will come in handy :P I’m curious about giving plastic welding a shot if something breaks, to fix the original parts. Seems like it should be as good as new, but I’m skeptical.

@@autonoob oh nice. Would you be plastic welding with PLA or just whatever plastic is on the car like ABS I may to able to print the arms with PA-CF, which is a carbon fibre infused nylon. This is a lot tougher and more flexible. Unfortunately I can only print this on the printer at school but going to see if I can still use it and try some test parts! If I manage to do anything I will try to post updates here as YT shorts or community posts. If I have enough content maybe I can make a full video. (:

@@firewaffle1 i was thinking same as the parts so abs probably. Make some videos I liked this one, I’m sure others will too. 👍

@@autonoob oh ok Thank you (: got some more projects planned

@@crischanlariosa6185 which ones? I haven't installed mud guards on my car unless you're referring to another part?

I spray painted the wheel arches and might 3d print some mudguards, however I don't think there are model for this yet b

Sorry there's nowhere really. Amazon often has some good prices depending on where you are. Costco don't stock 1:24. Sometimes you see them in toy shops. Maybe look also for specialist model shops n

Now I'm tempted to buy 2 more Lego defenders 🤣

Haha go for it, chair can wait 🤣 I wanted to get an F40 or F50 but couldn't find any for a good price! Thank you (:

If you can't remove parts because of the lights, maybe just mask the entire car apart from the bumpers and spray paint? Although extremely risky if not done carefully or correctly

@@firewaffle1 So I can remove the parts so I can spray paint it but like you said I don't wanna take it apart because I can't find the manual but I can give it a shot with masking tape.

@@Horseyiscool you don't need instructions. Very slowly and carefully you can remove the bumper and stuff. Take reference photos as you go. The bumper comes off in one piece for further disassembly. If you want instructions look online or for build videos (:

Yes 🤣 because Prius is evil

Perfect description of the cybertruck: a block (this video is just a joke (: )

I'm pretty sure they're the same casting so the only difference is that livery. Both look nice, just depends which one you prefer. I got this one because that was what was in the shops when I saw it. I am of course biased towards this one because it's the one I have (:

The red one looks very good too

But it's an SUV (:

That means so much to me so thank you so much 😊. I've been very busy with exams at school and coursework and stuff. There's lots of stuff I want to film and lots of cool projects I want to do but I just can't find the time at the moment sorry 😔. This set of exams finishes soon, then I have a coursework deadline but I'm hoping to get some stuff out in March (: thanks again for your support bro

@@firewaffle1 No problem Man! Wish You huge luck with exams :).

Yeah Bburago do other 1:18 models along with Maisto too. This is a much older model so that is why it seems so well made with so much attention to detail. Newer 1:18 Bburago models are still very nicely detailed. I do recommend some Maisto models too if you are interested in 1:18 Lamborghinis. It is subjective as to whether or not these are toys, however seeing as they are made of metal with fragile plastic parts I don't think they are really made to be toys. They're great for collectors like myself who can't be spending hundreds on a model. Thanks for watching 😁

@@firewaffle1 Thank you for the fast response. I agree, I don't want to spend a lot of money for diecasts too :) I will buy Bburago and Maisto then.

@@signornessuno5174 No problem, glad I could help 😁. Solido models (1:18) are a bit more expensive but have loads of amazing visual details (although lack physical functions such as opening bonnets and suspension, but still have doors and steering systems) If you are able to go to Costco, look out for Maisto models! (They are cheaper there, much cheaper)

@@firewaffle1 Thanks! :) New subscriber ;)

@@signornessuno5174 thanks so much 😁😁 I'm busy with exams at the moment so I'm not uploading right now (but hopefully soon!)

Ah nice, yeah I got this when it was a fairly new model and was lucky to find one with black wheels and a decent two tone scheme. Thanks for watching 😁

Amazon Can also find on eBay and some local model shops If not try Siku directly

Thanks 😁

Thanks 😂

Thanks 😁. Porsche room is custom. It's just cheap fake wood vinyl on the shelf with printed photos on the wall and othet accessories

Could you show your collection?​@@firewaffle1

And can u show tutorial to do porsche room???

@@braisetee I don't have a tutorial but I have a video on the 3d printed sign which I made later on ua-cam.com/video/DaWQxtgVEh8/v-deo.html