Відео

I’m curious how much it would degrade after breaking it into smaller pieces. I have a ton of 3D print waste (they call it poop) that is only 0.2 mm in diameter.

Mine keeps on saying "unsuccessfull'

THANK YOU!!

My unit seems to run all the time, even when the dryer is not running. I had air coming in the outside vent creating a negative pressure, so replaced outside vent. Helped, but did not cure issue. Is there a way to adjust pressure so more is required to start fan?

Thank you! Very useful

Thank you so much...... Just wondering if you know what might be going on my ice is freezing over the top of the cube and not dropping? Maybe the tube is clogged any fix?

Thank you sir! I got this mower used and have no documentation. This is one of those things that's easy once you know the trick!

a couple of thoughts wouldn’t it be cheaper to use 90% alcohol………and……….wouldn’t it work better with some surface tension breaker like dish soap?????? just some thoughts

Just checked out my 20 year old booster fan of the same model and it turns out that bypass tube for the pressure switch had crumbled to dust. A much less expensive repair than replacing the whole unit. Now I just need to figure out the specs for the tubing.

Hi, what you think it could be if I changed the same coil and still no spark?

I went and got the suff for making that today in the freezing UK , thanks so very much ! tips for tip (anyone who reads this post) Trust the Gospel ,this is itand the message in just 4 lines Verse 3 How dit he die, by shedding all His perfect blood so our myriad sin depts are ALL bought and paid for ,past present and future sins NOW that is Eternal soul saving love my friends!! 1 Corinthians Chapter 15:1-4 1 Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand; 2 By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain. 3 For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures; 4 And that he was buried, and that he rose again the third day according to the scriptures:

Mine went black after I started with the key control also the usb portal doesn't work too when this happened, I'm going to try this and see if works I miss the music and my kids missed watching movies 😭

How much is the total cost if you import it to the Phil.

I changed the power supply and main board same problem????

Mine come on for a couple of seconds and then after that is totally black. I am gonna try to do what you just did in your video and o hope my screen come back to normal

Waist of time, more expensive,just by a gallon and be done with it

Hey where did you find the new replacement console 👀?

I can tell you from experience that the pressure left in the tank is way less fun when it’s a tank for a glycol floor heating system and not water 😂😂

this is fun to watch in SLO MOTION!!! lol.. thanks for sharing...

Appreciate it boss!!

AMAZING! I knew you were a chemist by the terminology u use as u described the process..great work! love your videos!

Or, ya know, use a magnet.

Yep, a strong magnet should move them balls/compress the spring.

Much easier to just grab a pair of slim shears and cut through the pin in half a sec. Or do what I used to do - get wire clippers, and just clip off the sides of the pin head.

Lockpickinglawyer did a video about this as well, and how a strong magnet is enough

They do the same thing to plastic stadium seats when they’ve faded

It WORKED!! Thank you!!

pro tip, put a hot pan under the hot water right after you are done cooking, most of that will wash fine, you are pretty much deglazing your pan.

beautiful dish

I'll try it.

Does water come out right away I know water if supplied but I don’t see water falling or motor running

Thank you, today will be spent with the hair dryer to thaw

I love you man

I changed my sensor on a 2017 Tahoe and fan still doing it what could it be and how tight did you tighten it till tight or till it doesn’t turn I don’t want to strip it?

BRAVO!! The best tutorial I could find on UA-cam for cleaning an under counter Euhomy ice maker! And believe me, I had to look at a bunch of them before I actually found yours. Hopefully you'll get more likes and shares which will increase your visibility. As I said, it was really hard to find your video because there's not any other good ones out there for this specific machine. Maybe you could add some more words to your description or hashtags to get it out there more. But either way, thank you so much. The directions that come with the ice maker are really hard to understand and I am short of time but you have made my day. Thank you, Terry!

I was about to change the valve. Now I only need to replace the rubber seal which is only 3.5 dollar. Thank you for the video.

Exactly my problem thanks for the idea!

Mr. Clayton, why the Dimethicone + Sulfuric acid and Methanol + IPA can't mix perfectly? at the bottom there is oil sediment of Dimethicone + Sulfuric acid, I hope Mr. Clayton replies to my comment, I'm so frustrated😢😢

Thank you for the tips idol

Man I can’t get the air cover to come off. I loosen to metal bands and the large hose still won’t come off…

It’s supposed to have 8 qts with the filter.

Thank you for this video...I adjusted thinner and started right away

I did this before I watched this video on a 50 light string. It works great but there is a faster way. Once the hot lead is located as you did, start in the middle of the string. If you detect voltage, the first 25 bulbs are good and you have saved testing 25 individual bulbs. Now test the middle of the remaining 25 bulbs. If the light lights, you know the bad bulb is in the last 12 bulbs and you have saved time by not having to test every single bulb. Using this method you can locate the bad bulb much faster.

Easy on a single strand that’s not wrapped around a 6 ft Christmas tree or up on a wreath on your house. We have a 6 ft tall pre-lit topiary, and very hard to trace the wires.

How is the ac running now still good? I’m about to do this on my 2007 Honda pilot with the same problem

have you tried the diy never wet formula. Rtv sealant and White spirit can you make a video of that? Applying on any surface and longevity?🙏

After screwing around finding the dead bulb(s)…….replacing them only to have more bulbs burn out in the mean time…….I found a great fix…….throw them out and buy new ones …….the time and money ,aggravation ..spent on outrageously price tiny packages of replacement bulbs…..is well worth it ….Merry Christmas…..

Also, there is a fuse ( or 2) in the plug that will sometimes blow.

Smart ! Thanks for that !👍

Great video.