Відео

Around 12:50 in the video i show a bit of the shrinking. I admit the music is not good. I've been doing UA-cam videos for a few years now, but don't post very often so I'm still getting my footings. Thank you for watching and your feedback.

I’d be happy to help you where I can.

You can't say that without giving me some ideas. I thought I had pretty good taste in music. At least from what I can use on UA-cam.

@ScottsChaos I was mostly just joking, but totally thought your son had picked the music...Now that I know he didn't you look more of a Rock/Metal music listener than Dance/Techno. I guess don't judge a book by its cover. Lol good video though

Lmao. I am more of a rock listener. My son however I felt like the music choice fit the video better. My son definitely listens to rap. If you watch some of my other videos there is plenty of rock music. Thank you for watching the video.

I definitely thought about going to cable but I couldn't let it beat me.

@ScottsChaos you did your thing man! I MIGHT get it since you figured it out.

Slow and steady progress. But progress just the same.

All great information! Thank you. I have been struggling big time with my throttle body so have not uploaded lately. I have also been thinking about using the truck bracket and modifying it for my application.

Thank you!

I have been super absent lately. I’m a terrible UA-camr. lol. My throttle body is kicking my butt.

As far as I know they’re for the V6 to V8 conversion using the V6 kmember. If you check their website you might find what you need.

I really wanted to post a longer video. I’m pretty sure I lost a bunch of footage. I am disappointed in my own behavior with this video. But I felt that I needed to get one out.

@ScottsChaos dang. An nahh man. Can't be talking like that. Video was good to me. Just wasn't long enough

@@kurrentracing thank you! I appreciate your words of encouragement. I have another short one coming. lol. Then I’m sure they’ll get longer.

@ScottsChaos np man. You build for it. Just show that confidence bro. And I like the other video too. Your videos might need to be longer cause you get straight to the point which is GOOD! So you can have longer videos🙏🏿 I can't wait till you drop again.

Very true had the same issue one time lol. Had them replace the MAF but I have a feeling it could’ve been cleaned

Yeap it made my tpms light come on

Ah. I just looked. Okay. I get it now. Thank you!

You don't like it eh?

The engine in mine is a 350 V8. I'm almost positive (well depending on your mechanical ability) you could put an LS in it. I have been toying with the idea of putting one in mine. However I'm in the middle of a firebird build right now so it would be awhile. Is the outdrive on the boat?

@@ScottsChaos There’s like half of an out drive I would say. My boss bought the boat to use as a parts boat as it already had no engine and they didn’t want to pay to scrap it and I have always wanted a boat so I figured it would be a fun project since besides mechanically it’s not in bad shape. There’s no propeller but there is the big housing that a propeller would go in. I am a former helicopter mechanic so I have the mechanic aptitude, but I don’t know much about boats specifically.

If I was in your position I would 100% source a 5.3 liter LS from a junkyard. And put it in there. Just remember to get the PCM wire harness and if a drive by wire get the tac module and throttle pedal.

I cleaned the hell out of it! Wiped it down with Acetone. It held it pretty well. I haven't looked at yet this year. I'll probably do a better follow up video in a couple weeks than I did last year.

@@ScottsChaos ok, im looking too do my ski boat and ill probably have too tear the carpet out, sand the gunk off, and then lay the stuff down. a follow up would be great

Yes I could have bought a harness but then I wouldn't have had the experience of doing it myself.

Nope. Going to paint more too

That's a sneak peek. Longer version is coming.

@@ScottsChaos bet! I didn’t know you been posting and you had a 5.3! I got ya notifs on and just now getting that. You gotta IG?

@@kurrentracing I do. But not very active on it. I should be. But I'm not.

@@kurrentracing what do you use IG for?

@@ScottsChaos recognition, promo. Etc. in the long run I want sponsors, so having good social media and something to show for will be good.

So did I build the compressor wrong? I didn't get any instructions with my cheap eBay one. Using the socket as a spacer worked great. Threading the bolt in from the bottom and using the nut makes total sense now. Lol. Thank you for watching and for learning me up on that spring compressor.

Yep, I got mine off of Amazon and it took me several attempts before I figured it out. Glad this help.

Hey, at least you figured it out. I just kept doing it wrong. 😂😂

I researched that and did purchase the spacers as well.

@@ScottsChaos Perfect 👍 you should be Golden once it’s installed.

@@CooKoo707 ha! I'm not going to celebrate just yet. Lol.

@@ScottsChaos lol 😂 no doubt, but you’re off to a helluva start.

Thank you! I really appreciate it.

A speed wrench? Like an impact? I guess I'm not following. But I'd like to. 😂

Thank you! I hope it runs good when done. This is the first time I've built an engine. Fingers crossed. Thank you for stopping by and leaving a comment.

I appreciate your support. I'm going to see if I can get this engine running and go NA for awhile before I think about a turbo. Not that it's being built for one. Lol. I'm also thinking, if I blow this 5.3 I might go up to a 6.0.

Awesome! Thank you for the support. I see you have a panhard bar video I need to watch. I'm doing all new suspension during this build as well.

Thank you dear! I love that you support me in all that I do.

After reading your comment. I went back and watched the video. I can honestly say I understand why you would say that. I have to apologize. I was trying to make a video that was longer than a couple minutes in length but really had no idea on what to video so I just threw it together. I'll strive to do better. I appreciate all of the input here on the channel.

Lol. I don't know about that. He actually just traded the Dart in for a 2013 Audi A4 2.0 turbo. So we will be doing some videos on that car.

Aaaaaaand I bought the dart. 😂😅 small world.

@@jnastyrista my first thought was "that's friggin awesome!" But then I thought "maybe they're joking." If you did buy it, awesome! It's actually a great car. My son really liked it.

@@ScottsChaos nope I for sure bought this car. Lol still has the wing and everything.

That's awesome man! How are you liking it? My son was always told it was the cleanest dart in town.

I'm pretty sure I tried that the first time I put the eva in. I probably had some really bad product. The spray adhesive I used stuck pretty good. The adhesive on the eva was separating from the eva it self.

I enameled the deck first then put the Eva on the enameled deck haven't had any lift issues.

I thought about sanding the deck smooth and gel coating it black and then laying in some eva. Oh the work that would have been. Obviously, I decided against it.

I have been told I should have included that part in the video. I apologize. I'm still working on being great at UA-cam. You put an adapter I'll link here into the city water connection. I only push about 15 or 20psi into the system. www.ebay.com/itm/293521669327?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=srz703y3RVq&sssrc=2349624&ssuid=fthbkm2wska&var=&widget_ver=artemis&media=COPY

From the spoiler and wing king www.spoilerandwingking.com/

Thank you and they are only 20mins from where I live

Thank you!! It was actually a bit involved. I had to remove the plugs from the controller and solder on wires so I could mount the controller in the garage. Then just plugged them into an outlet.

Oh man! I'm so sorry. I'm still trying to find my place on this platform and I seem to constantly get ahead of myself. I will do a quick follow-up video this weekend. Again I apologize.

I appreciate your input. I'm still learning this UA-cam thing. The channel is Scott's Chaos for a reason. I'm all over the place.

I don't remember an exact amount but I'm guessing it was right around 100.00 bucks. It will depend a lot on where you get it and the brand you get. This stuff is pretty inexpensive but it in no way compares to the name brand stuff. Although, I have had good luck with it. As with anything. Prep is key.

I have amazing children. I didn't get an opportunity to learn how to do these things from my Dad and I vowed to be the best one I could. Your comment is the best thing I could have come across today. Thank you so much!

Thank you! A friend of mine put that opening graphic together for me. It turned out great! I didn't want to do the really bright red and didn't even think of blue.

Thank you! I appreciate it. I went round and round on the color. Finally settled on Cranberry. I love it.

Lol. It's beyond my skill level too. But I'm learning and I'm having a ton of fun doing it. Just hoping for the best when it's time to start it.