Відео

It did. I ended up having to sell it due to personal things going on

@@boringkhaos Im good. Just fixed a major problem on mine. I over tightened the chain yeeting it too far left, it was making the noises! 😂 Quarter turn loose on the operator side of the back wheeel fixed that.

Awesome! I was told to just check the marks on the axle and swingarm and go about 2 finger widths of play in the chain

@timmit3579 lol some people don't understand and I've had a lot of people ask. You'd be surprised how many people haven't even operated a standard shift transmission and don't understand how it works. I didn't make the video for views I made it cause I have had people ask and figured it could be helpful.

Thanks I appreciate it. Going to try and get back to regular content!

That's awful. It's been over 90 every day for 2 weeks here lol. I don't know which is worse.

@@boringkhaos i much prefer heat to cold. I went into a corner at speed a few weeks back, went to grab the front brake and my fingers were numb. Thankfully i was only precautionary braking, but still was a bit scary. It was about 40f. I've just bought some hand guards to attach to the bike to keep the wind off my hands. I'll give them a try whenever it stops raining. The rest of my body i can keep warm quite well. Hottest ride I've done was just under 100f and it was hot but ok. The worst bit is if you have to stop or just crawl along in traffic

I 100% agree with everything you said. I can say that I have put rubber gloves over my riding gloves and you would be amazed at how much it helps. Just because it keeps the wind off of your fingers.

@@boringkhaos I've trief nitrile mechanic gloves, washing up gloves and some thin fabric under my gloves (not all at once) but couldn't find anything big enough to go over my gloves. I tried plastic bags but they were too slippery. I bought some new winter gloves which helped a bit. The other part of the problem is that by the time i get downstairs, get the bike out from under the house and then get the last of my gear on, my hands are already cold, so the never get a chance to warm up in the gloves. I should get the bike out, then go get ready for work and be fully geared up before i leave the house

@mad082sss I say that too but I'm procrastinate too much. Lol. Try under the gloves. I think that's actually what I did. And now that I think of it it was those rubberized gardening gloves. They are like rubber on the outside and wool or some kinda fabric on the inside. It also helps I'm extremely warm blooded. And also takes no more than 10 minutes to go to work.

Hey just gotta keep your head up I was the same. I tore my quad when I wrecked. Then literally 2 days after I was able to get on we had a baby and it's just been unmotivated due to weather every since.

@boringkhaos Congrats on the baby my friend!

Thank you!

Same! I just ride back and forth to work but I work outside so the breeze is nice lol. And it rained for 2 weeks straight before the heat wave

1000% had a pretty rough wreck. I didn't have motion in my knee for a few weeks. 2 days after I was able to get on the bike was in hospital and then it rained for 2 weeks straight. So motivation has been hard to come by. But I'm back now! Thanks bro!!

Yeah I know it. I have corrected most of these things over the years. Thankfully nothing worse happened and I have enough people willing to help. I definitely have learned to stay in the 2 or 3 lp on stretches like this unless a long straight stretch I like lp1 that way I'm able to have a better line of sight

It's the mt03 and I'm not sure I understand what you mean

Mine would do 108 on a really long flat or slight down grade. Weight is also a factor as well.

😅

Lol. Probably smart of you. I just used it to do slides and stuff like a crazy man. Haha.

I just unplugged the front sensor. That turns off the abs completely but you keep the speedometer. If you unplug the rear you lose the speedometer.

I got some rubber barends on Amazon and used those they're like a rubber one size fits all. Kind of like the universal freeze plugs if you ever used one. I also got grips from there but any of the 7/8 grips will work. Too bad you're not around here. I would love to help.

Lirun 2 Pieces 7/8" Handlebar... www.amazon.com/dp/B0BPXCMB2R?ref=ppx_pop_mob_ap_share here's the barends I used.

Dunlea for Yamaha MT03 MT-03 MT... www.amazon.com/dp/B0CF8L84R2?ref=ppx_pop_mob_ap_share Here's the grips lol

Thanks! I try to have fun with it! Hopefully get to get back at it with the videos.

@@boringkhaos I found this video searching google images for “mt03 stunt bike” it’s such an underrated machine. First gear she comes up so nice. Would you consider getting that velocity stacks and a tune from 2wheel dynoworks?

So anyone going to a 600, just a heads up that they are not as maneuverable as a 300.

100% I upgraded to the 636 and was in the exact same scenario. I thought it was a learning curve just get used to it. After about a yeah I got the mt03 back and rode it a few times. It's not as exhilarating speed wise but the handling of the mt03 is amazing and very maneuvers very well

17:35 Very gently, barely touching it, the rear brake can help tighten the steering line. Needs practice, low speeds first. But it can help.

I've definitely became accustomed to doing so. That's very good advice. Just because they sound not be there doesn't mean that it's not.

You can get an r6 throttle tube. That's what I did. It will give you the response you are looking for and they're cheap on Amazon

This bike is amazing for what you are looking. It if very light and so easy to flip around corners and maneuver. It's tagged as "beginner" so there's very limited controls. It's the very basic. You get abs and lights and that's about it. It's nothing too much. The only downfall Is It's not overly torqued. But it'll do a little over 100. I recommend it to everyone

😅😅

Thanks for the input. I appreciate it.

Hahaha yes! I feel that haha. I'm still searching for 7th gear.

Do what? Lol

I've done tons. Checkout my most recent video. It's a walkaround of the bike showing everything.

How are you recording your audio for this? And helmet cam or chest cam?

It's an amazing bike to start with and even to ride period. I still enjoy riding even with having my zx6r as well

@@boringkhaos oh my first bike is an '05 Yamaha Vulcan 800 (cruiser not sport bike lol), I was just in a hurry to own something to get more practice on 😆 she is beautiful tho

It just depends. The interstate is very unpleasant. However on an open highway not too bad.

Actually middle tn. But it might as well be lol.

Yes it should fit. It's the same year as mine. It may have been listed as an r3

impaktechusa.com/products/crash-cage-yamaha-mt-03-2016-2024

I've been putting in work need to be more consistent!

Yes!!! It's such an odd turn and you think you're done but it still gets you lol. I've heard of a few wrecking there!

😅😅 I try to have fun. My sense of humor usually goes unnoticed. I appreciate you lol

Thats when I chicken out. Bout 90

It would do 107 downhill before now its 85. And that is on rev limiter lol. Mph of course

It's 85 top out on rev limiter now haha

It's so unnecessary but awesome. I went 58 tooth if I had to do it again I would try and find a 52 or around that. You run out of gear by the time the wheel is off the ground. My buddy can wheelie it in 3rd but he's about 100 pounds lighter than me.

Things mint!

Haha I'm sure they do. I got my set from siccshop.com

I actually ordered a set off ebay and they got canceled 2 weeks later cause the guy said his dad died. This might sound scrappy but I don't know what that has to do with shipping my parts lol. I'm pretty patient didn't have to straight up cancel me haha

IMHO I would for a purpose built bike but just for commuting it's not necessary. My biggest debate is that my stock is damaged. And why buy oem when I can hit up ebay for 100 bucks

I respect that. Mines a toy at this point. That's why I went with the 100 dollar Amazon tire on the rear lol

I wouldn't say I deleted it, haha. I more or less drove it around a few times, disconnecting sensors until I had a speedometer and was able to do brake skids lol. I'm pretty sure I ended up with the front sensor disconnected and back connected. Either that or vice versa. It was some trial and error to get what I wanted. As far as the bars go, it was simple. Just make sure to drill your holes for the controls otherwise they slide around. And you will have to cut a little bit off the ends to keep stock cable lengths.

What number did you cut? It has a 1,2,3,4, mark.

For real! I'm thinking about customizing a hack job 12 bar and adding a support bar like a sissy bar somewhat like you see on cruisers. But I want to integrate it where I can do standing wheelies as I get better. It's in the thought process right now trying to decide what I wanna do. The initial idea was to completely hack it all off but there's some important stuff there lol

I 100% would get the mt03 again. I actually really still enjoy riding it. It's fun. It's super easy to ride. It's extremely forgiving if you get in a bind. It isn't so fast it'll get away from you. It's so easy to work on as a naked cause everything is accessible without dealing with all the fairings. Also God forbid you do wreck it, parts are crazy cheap.

Thanks! I appreciate it. You do the same

Nice I like the katanas. Rode with one last night actually

Yes it is. And let me tell you. It actually adds a step or 2 lol

@boringkhaos I figured it wasn't gonna be that simple lmao 🤣

@tas787 I'm sure there's other ways but I had to pay a dollar for an app on my computer and then learn how to process it. Then edit it in 180 change it back to 360 then upload it. And I can't do 180 and 360 in the same video it makes to flat 180 videos lol. At least I haven't figured it out yet

Yeah cage was at the house lol. I got it on and it's back on the road I've just been testing the waters doing videos with my other bike

Don't recommend it Lol. I try not to but it's so tempting when there's a perfect gap and the cars are just riding same speed side by side. I wish we had more than 2 lanes on our highways here

Time brother!

I don't know if you seen or not how aggressive they were not wanting me to pass