- 27
- 132 586
Laser Mania
United Kingdom
Приєднався 9 лют 2019
Laser stuff
Fun stuff
Serious stuff
Fun stuff
Serious stuff
Making a Custom t-shirt Using my Laser and PVC FREE Vinyl
WARNING: CUTTING VINYL CAN BE DANGEROUS
This is PVC free wich allow a safety laser cut.
DO NOT ATTEMPT TO CUT PVC VINYL WITH YOUR LASER !
Enjoy my last video about how you can make a custom thsirt using pvc free vinyl
Here is the link for the vinyl...not a sponsor or anything
-bit.ly/3oqpVQun
This is PVC free wich allow a safety laser cut.
DO NOT ATTEMPT TO CUT PVC VINYL WITH YOUR LASER !
Enjoy my last video about how you can make a custom thsirt using pvc free vinyl
Here is the link for the vinyl...not a sponsor or anything
-bit.ly/3oqpVQun
Переглядів: 1 521
Відео
Can this Laser Cut my Finger off ?
Переглядів 3 тис.4 роки тому
Crazy science, no many things i can say :)
Making a Garden Sign from Pallet Wood
Переглядів 4704 роки тому
Making a garden sign from pallet wood using laser to engrave deep in to the wood and then fill with epoxy resin, the result is amazing :)
5 Useful Projects Done With a Laser
Переглядів 1,6 тис.4 роки тому
5 Useful Projects Done With a Laser 1. Pen holder 2. Business card holder 3. Screwdriver bits holder 4. Knife support 5. Phone holder
How to Install Air assist on Your K40 Laser
Переглядів 14 тис.4 роки тому
Here is a quick tutorial on how to install air assist on your k40 laser. Hope to be helpful. Leave a comment if you have any questions :) .
I Made My Own Tesla Cybertruck
Переглядів 7274 роки тому
Here is my new project, took me about 3 hours but was worth it :)
Laser Cutting Leather With EleksMaker A3 Pro 2.5W + Air Assist
Переглядів 3,1 тис.4 роки тому
Laser Cutting Leather With EleksMaker A3 Pro 2.5W using air assist this time
How To Install Air Assist on EleskMaker A3 Pro
Переглядів 3,1 тис.4 роки тому
How To Install Air Assist on EleskMaker A3 Pro
Making a Heart gift box
Переглядів 7144 роки тому
Making a Heart gift box. Enjoy Here's the link for the file : wood-toolbox.com/?product=heart-box-4-versions-digital-files
So Satisfying to Watch | Laser Cutting |
Переглядів 5564 роки тому
Laser cutting ...I can watch this for hours :)
How to Make £1,000 a DAY with K40 Laser
Переглядів 21 тис.4 роки тому
In this video I share with you guys how you can make £1000 a day with your K40 laser Big thanks to Tyler Elliott for sharring the file.
Laser Cutting Leather With EleksMaker A3 Pro 2.5W
Переглядів 21 тис.5 років тому
Laser Cutting Leather With EleksMaker A3 Pro 2.5W Music Credit: LAKEY INSPIRED Track Name: "Days Like These" Music By: LAKEY INSPIRED @ soundcloud.com/lakeyinspired Original upload HERE - www.youtube.com/watch?v=RTGEo... Official "LAKEY INSPIRED" UA-cam Channel HERE - ua-cam.com/channels/Omy.html... License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3....
How to Engrave a Slate Coaster with Eleksmaker A3 Pro
Переглядів 2,6 тис.5 років тому
How to Engrave a Slate Coaster with Eleksmaker A3 Pro
Can a small laser light up a candle ?
Переглядів 2415 років тому
Can a small laser light up a candle ?
How to use Eleks Maker A3 Pro With Benbox free Software
Переглядів 26 тис.5 років тому
How to use Eleks Maker A3 Pro With Benbox free Software
Leather Engraving with ElesksMaker A3 Pro
Переглядів 26 тис.5 років тому
Leather Engraving with ElesksMaker A3 Pro
Laser engraving on metal card holder with 2.5 mw laser
Переглядів 2,6 тис.5 років тому
Laser engraving on metal card holder with 2.5 mw laser
Laser cut a gift card - big fail 2.5 mw laser
Переглядів 1,5 тис.5 років тому
Laser cut a gift card - big fail 2.5 mw laser
How to make a personalised phone case with Eleks Maker 2.5 mw
Переглядів 4065 років тому
How to make a personalised phone case with Eleks Maker 2.5 mw
cool !!!
What is the name of the application that the machine is running with?
Exact asta cautam! Abia aștept sa vad cum ai reușit și cât te-a costat!
Hello :) what is the best power to avoid coal dirt?
I'm having difficulties updating the firmware. It says semaphore timeout period has expired. Plz help
Benbox software link
at 1:02 i can't make that happen. it doesnt weld for me. whats the trick? when i hit difference i lose the complete name and all i have left are the edges and they arent even welded into the background. Any clue whats happening? thank you
How much does this machine cost?
When I added a 50L air assist to my k40 laser It turns on and off by itself, what is the SOLUTION please 🥺
Possible some electrical connection issues
Can you tell me which software you are using for treating this machine
Benbox
THE GDMF'ING LASER ISN"T WORKING! NONE OF THE LINKS WEB SITES, FIRMWEAR, ARE WORKING! POS!!!
wow nice
gosh this pump so loud :( sadly cant find nothing more silent :(
I purchased the Laser Engraving Machine - 3000MW Blue CNC, but received no software CD does anyone know the link to download the software for windows? Am lost
What facebook group is this file available in?
Good morning. Where's I buy it
Quite misleading and click-baity. Making them is not a problem but how can you sell 172 of them with the name on them already. How many ppl have the same dog names as your imaginary ones? Rather than cutting wood if you cut gold sheets than could make 1 Million quid a day isn't it?
Price of this machine
Around £150
Can I buy it
Can I buy it. I am in Germany
Which is the facebook group?
Hey...I have a problem with my EleksCam laser . It shows the preview of the print but when I give it for engraving it moves but it doesn't engrave anything. Can you please help me with this ?
Hi , maybe you laser module is in preview mode, you have to press the button on the top of the module ( is on when blue light ( for preview) will disappear.
@@lasermania6805you mean I should turn off the blue light and then give a start to print?
Yes
@@lasermania6805 hey..thank you for the insight. I got it working 😀. Do you have any idea as to how to improve this to cut polymer waveguides.
You're welcome! Glad you got it working. You have to focus it verry well and use air asist ( see how im my other videos) but depends what thickness and hoaw many wats is your laser
It's probably more like 172 ornaments a day considering you can prepare the next files while the current ones are cutting at the same time for a 10 hour work day.
can you test pvc engraving ( credit card )?
Pvc is not suitable for engraving as emittes fumes dangerous for your health.
How did u paint it? And why you used Iron? Plus isn't this seasonal only around Christmas season?
Just regular spray paint, is not an iron is sanding machine, to get a better finish of the plywood. Yes is around the Christmas season.
Pointless! the guy didn't realize that the main issue is his lack of knowledge of laser beam operation! And the funniest above all, he call his channel "laser mania"... LoL HA HA HA HA!
Have you tried wetting the leather first?
No this isn't telling us how to make $1000 a day it's telling us how to make $1000 in stock. Anyone who runs a business would know that unless you're McDonalds your biggest concern will be trying to actually get customers.
Warning, cutting vinyl will result in deadly chlorine gas evolution. You should never cut vinyl with a laser!! wiki.atxhs.org/wiki/Laser_Cutter_Materials#NEVER_CUT_THESE_MATERIALS
Please watch the video again 😉 Somewhere there I said is PVC free, witch means is leser safe, that is the main idea of this video. Also check the link in the description, they clearly mentioned that in their product description. Thank you :)
@@lasermania6805 I do understand that. At the beginning of your video You could inform viewers of the dangers of laser cutting pvc explicitly, and the distinct differences between pvc and non pvc vinyl. This is crucial to prevent viewers from being harmed. Your work is appreciated very much.
You're right, my bad, I'll get de warning in the top of description and hopefully will get people attention about how dangerous is to cut a pvc type vinyl. Thanks for your comment, really helpful 👍
What was the clear backing material you applied the letters to and then put on the the shirt to press?
That's how the vinyl is, with a sticky layer(clear) so you can "kiss cut" the letters and remove the excess. Than press it to the t shirt .
Can this engrave 1mm brass or .5 mm brass ?
Using some techniques, yes.
Good and instructive video, but in the last attempt you could do the following: In your video you can see that the laser is too far from the material (the focus is not well adjusted and the beam is wider in contact with the material and therefore the cut is wider and it is harder to penetrate the material) If you approach the laser material the laser will cut the material in 2 passes. I think you are already in the next videos be more successful, good luck.
I don’t think that’s 2.5 mw
Yeah you can power several homes with 2.5 MW. Probably 2.5 KW if even.
To slow
But did you account for cost of material and energy to run it that long. 🤔
Is only the revenue, all cost excluded.
Hello. May I know how much is the machine? I hope you can answer. Thank you so much!
Hi, I paid £150 couple years ago, cheaper now I guess.
Can u please tell me how to test the size before printing
Hit the "border preview" button wich is by the last of the start button.
I use a K40 every single day for research purposes and this intrigued me, I am struggling to see how so many paw prints of the size he is showing sanded could be produced on a standard K40 from one sheet of ply? The scale in Inkscape is way larger than the K40 standard bed. Are you certain your K40 has not had the bed increased? The laser head plate as far as I can see is a modified version, the head itself not so, but the drag chain yes. Personally I think the claims of selling 120 a day are exaggerated based on what a K40 can actually produce, even on eBay and Etsy this sort of bling goes from 4gbp not 8.60 gbp theres no proof or evidence that he's selling this many and if he was I am sure the Inland revenue would be interested in seeing his accounts. All he is saying how many he can produce on a 10 hour day, he's not provided anything to show you he's selling 1000 per day. You would also need refrigeration systems in place as after 3 hours continuous lasering it will increase the water temperature by at least 5 degrees if not more from my research. The kerf you are creating is also way too big as your items actually drops out, this shows that the laser beam is too thick, you should aim for a finer cut and use the "tap" method to remove them. Works much better and you dont end up with a black hand after handling from the carbon on the side. You would also be replacing the tube once a month based on those figures on a average lifespan of 1000 hours @ 8 hours per day usage. On a good day in the christmas and other festive holidays you might sell a few dozen a week but 120 per day is just pie in the ky wishful thinking. I belong to several K40 groups and in particular a specialist unit where there are 8 K40s working all day long to produce items for the seasonal holidays and while they do sell a lot as they have online shops everywhere and supply to other people they dont reach the 1000 GBP a day on one K40.
Great info. Def would need multiple shops and need to account for power. Supplies. Replacement parts. Etc.
Amazing, i have also started the leather wallet business, can you please tell me how much laser machine cost and if you can provide the link that would be awesome :) P.s. I just need to print my brand name with laser on it . Thank you
There are so many there, This one I paid around £150 some time ago, now there is a large variety on ebay, just type in , Eleksmaker, Orion(a better quality but more expensive brand) and many more . But if you said is just for the logo you can go with a smaller size a bigger power , more speed and you'll engrave them faster.
@@lasermania6805 thanks man helped alot :)
@@junaidYousaf07 how is it going brother? your business?
Everything I've read only "speed and time" do anything,
Yeah, tha thing is to fine the right amount of speed and power for each material you do.
Hi. Nice work. Can’t find a file on your Facebook Page.
Thanks, not my page, but should be in the file section.
Thanks big help, could have done without the Porno music though.
What kind of paper do you use for sanding?
Grit between 240 and 400, depends how smooth you want your surface.
What settings did you use for the laser setting and speed ??
3mm birch plywood, 8mm/s , at 28 power ( 14 A) for 30w tube (mini k40)
@@lasermania6805 10 mm/s at 17.4 % power 3mm brich plywood.
Nice, I was using 30w tube as it is a k40 mini.
@@lasermania6805 Laser k 40-- I sent you a video to see. In fb
if you cover your plywood with masking tape or painter's tape and then cut it, you won't have to sand it to get the scorch marks off. Just peel off the masking tape and you have clean wood.
You're right, I do that, but this ones I paint them after and I wanted a smoother surface for a nicer result, If I was just leave them unpainted i would use tape. Thanks for your comment though.
Hi I have tried joining the group on facebook and noone seems to be authorising me
Hi, unfortunately is not my page ..they will accept your request soon..
Thanks I would like a copy of your paw print file its great thank you. You have been an inspiration
@@lasermania6805 Which facebook group is it? I don't see any info your description above.
I like the puzzle. Where can I get that
3axis.com ..but modiffied myself
Hi Laser Mania , good video . Just have to ask you , whats the name of the file . I can't find it on the link on FB, must be trying to hard hahahahahaha and whats the name of the font your using on the video. Thanks
Hi, thanks, should be paw print ornaments or something like that, font is Deftone Stylus
@@lasermania6805 thanks ill check it out
Where did you get the white bracket?
If you mean the jubilee clamp ( the one I tightened the pipe ) on Amazon/ebay, if you mean the bracket that I attach it to the laser head( tha gold one) it came with the laser as is an upgraded k40.
@@lasermania6805 Thanks.
What font is that?
Deftone Stylus
turn the music off so annoying
stfu
How long does it take to engrave?
Around 25 min .
Laser Mania 25 for 1 coaster?