Відео

Did you only use the gelid extreme for both sides or did you use gelid extreme for the gpu side only?

Was this the 12gb version? And what were the sizes for all the thermal pads?

So I've been having issues with my back fan starting to wobble and sounding like an old engine... Took the card out identified it's defo that fan that's wobbling as it's loose and not stiff like the others.. Where did you get your fans from?

I have a 75w card WITH an additional 6 pin connector, I think that's a special usecase

Finally, someone with actually useful information. You're underrated!

You have experience with Gelid Ultimate pads? I'm debating between gelid ultimates and extremes for 2mm.

I've been wanting to do this. PSUs are more efficient on 240v than 120v. Is it a dramatic amount? Well, as you have shown, no. BUT it is still more efficient. You can even check PSUs' efficiency rating curves and how they compare on 120v vs 240v plugs. It's really going to be the most noticeable without a load... as PSUs are generally rated at 93% efficiency under moderate load. Depends on the wattage of the PSU, of course. And then you have your 80+ bronze, gold, platinum, etc., which means the lowest load they can go to to be at least 80% efficient. I have a Corsair HX1200i and I'm running 98ish watts from the wall @ 83.x% efficiency which is showing about 82 watts. So, my PSU at an idle is pulling 98 to convert to 82 watts. It'd be nice to increase that efficiency. Would I see it on my electric bill? No. But I'd see it with HWiNFO64 lol. The Corsair HXi models have their own power monitoring hardware in them, so as long as you connect it to your motherboard you can monitor all your PSU specs. It matches up with my Kill-A-Watt 3 meter. It'd just be cool... that's my only excuse. Plus, the efficiency curve rises much quicker and drops much later on a 240v outlet according to the manufacturer's tables. The issue is that the 240v outlet is about 18 feet away :-/ Not sure if I want to run an extension cord for a PSU cable just for all this. And moving my set up is out of the question. Plus I would need a new surge protector for 240v.. which isn't a problem but, I dunno. It's just unfortunate that the only real efficiency gains I'd see are at idle. But if I could bring my efficiency rating from 83% @ 100 watts (averaging) to 90-92%, that'd be pretty nice. I need to find my efficiency rating table and see EXACTLY what this PSU would do.

can I use GTX 1650 that needs 6 pin and use 1 sata to 6 pin connecter?

Are they good for CPU ?

Are these revision 1 or 2 cards?

Where did you get fans exactly? My 2080 need some replacement i think. Thinking about replacing or doing deshroud mod

3070 is 1.5mm pads

Great video. Do you know how to start up PD19 without a breaker board?

What thickness thermal pads is correct for this card? :)

The hotspot temps you are seeing buddy is on the GPU dye so good thermal paste like syy 157 or Thermalright TFX or even the Honeywell PTM7950 thermal pad would see a reduction in temps but not by much however far better than the stock paste. Since the founders 3070 is GDDR6 it doesn't run as hot as GDDR6x VRM modules on the ti 3080+ cards and doesn't have sensors on the card which will allow you to monitor temps. However your thermal pads would have made a difference, its just that you can't monitor them using software.

I already watched this before, but i just wanted to inform you that GELID ULTIMATEs are better

Thanks, I have ROG STRIX RTX 2080 Super OC with 3 fans and the middle one is going to 0 and back to speed and then back to 0 again. Also its wobbling when it goes back to 0 with irritating sound "screech" (hard to describe). Do you think it would be fixed by changing the fan? What kind of screw driver I need to replace fan?

Bad title! This limited video doesn't show me how to check the PCIe power draw of anything but a GPU... I need to know what the power draw of my PCIe NVMe adapter card is, so unfortunately, this is useless to me.

Can you please tell me where to buy these fans? I don't even know what I'm looking for, but I have the same card with the same problem. :(

Great to see the work on this. I did something similar with a T1000. Temps are a solid 10°C lower under load.

Thanks for this video. Much appreciated. Helped me out.

I have the exact same card, do you know the mm sizes for the pads you used? 🙂

these cards are crap, I bought two only to discover their temperatures suck, even with new thermal paste and quality pads. I returned them

thats just gross…..

Best thermal pad zero problem great result I went with the same struggle and ended up gelid extreme

Hi, could you please specify the pad thickness for the VRAM pads? Thank you!

These are rubbish over priced

im hearing that 0.5mm pads all around are the way to go for this aaand that 1mm< will be bad for temps, you say otherwise.

this channel makes me wish youtube never took away dislikes

PD19 is way better efficiency

try K5 Pro it works great

Sadly this isn't always accurate. For example, I currently have a GTX 1650 in a low power build I'm messing with and it's undervolted. Maximum power consumption seems accurate in HWinfo as it shows 60.8W at 100% load, but during idle its showing 32W, which is WAY higher than it should be. A GTX 1650 idles around 6-8W. Software like HWinfo is great for many things, but the readings aren't always 100% accurate. So just be aware of that.

Thanks for this. I have the 2080 version

Awesome vid man, I was wondering if you've done a repad for an MSI 2080 TI Gaming X Trio

Great video, very helpful! Could you tell me the Pinout of the RGB Header on the card? Is it 4pin 12v RGB or 3pin 5v ARGB? Thank you. I plan to control the RGB with an adapter via a motherboard rgb header to sync it with my other components.

Great video! I'm planning on replacing mine soon, 1.5mm pads is what you recommending to use? did you use 1.5mm for all of them? and by the way how did the 1mm go?

Can you show how the different breakout boards reacto to the PSU?

do you use lock tight on the screws?? helps huge with vibations.. just dont get the red labled one...lol

have the PD, do you have any mods for the 13.8V or the turn on resistor identifiers?? it would help a lot..thanx

What a dog shit video, why don’t you actually show how to open up the card and remove the fans and connect them? Thanks for wasting 3 mins of my life

What thermal pads did you use (or what was the W/mK)?

Hi sir how about the brown out no electricity then comes back the electricity .. server psu with in 5 mins or 1 hr and the toggle switch always on?

I got one of these for cheap because the fans don't work. I got new fans, plugged them in and the fans still don't work. Not sure what's going on exactly, or why, but it's time to get out the multimeter I guess.

Hi I tried to email you but doesn't send, what's the measurements for the rest of the pads? I saw someone used 1.5mm for the memory Soo is it 2.0 or 1.5mm

i had orderd the same thing only the noctua paste 3,5grams

What size thermal pads did you use?

I'm new miner. Can i use 1660 super ?

i'm getting nausea with the camera work

Great video! Do you know the sizes of the rest of the thermal pads? I can't find any details and the evga CS just says 1mm all around - total BS

i have 3080 colourful,today when clean my gpu thn one blade broken of my fan, then contact to customer care they can’t help me, how can i fix this broken fan ??? Im from Bangladesh,This broken fan is not Available in Bangladesh.