Відео

@@sebastiaanvanvugt1761 it's just a zip file. Change extension to open. Or use power platform CLI to unpack

Have you tried the sort(), in front of the showcolumns().

been quite a long time since I had to do this but I think is something like.... (you will have to play) parameters: - in: formData name: FileData description: The file to be uploaded required: true type: file

@@DavidSoden Thanks for the quick response. Yes I am doing the same but some how in power apps its showing as body. Cannot show the image here. But anyway, I will have to play with it. Thanks again.

Not much you can do then. Brain surgery is your only option. Download the app. Then make a new empty app and download that. Do a YAML comparison and try copying the code over. It's lots of trial and error but something should stand out. Past that open a ticket with Microsoft.

@@r.zainalarifinfandisaputraif you're talking about dataverse yes, unless it's a system relation or they did something to prevent it and finally a dependency preventing it from being deleted. Some you can work through others no.

@@DavidSoden I see. It's related restrict how user enter new project. I'd like to make it one flow only just registering in project accelerator, but yesterday incidentally created by user who I haven't yet gave him access. After I went through, I found that my user imported his *.mpp to project for web. I was trying to delete and updating its status to inactive, but it impacted to his project for web. I guess I need another work around to solve this

correct, did not exist, ADO and or PP-CLI were the main options past manual.

Usually happy to help in the comments section, but this ask very large for a comment. This is the 1st time I have had this large of a question ask in the comments so... If you would like to discuss hiring me for 1:1 consulting training davidsoden.com/#MyCalendar, perhaps this is an option but I do not see this possible to answer in comments.

Which mobile platform? iOS is more finicky over Android IME

Ok so I made a quick simple app and ya the function is completely changed and non functional. Suggest you open a ticket with microsoft ASAP and I'll do the same. the more pain they see something is broken the more incentified they are to make it go away. make sure you open the ticket from the admin center admin.powerplatform.microsoft.com > left side bar HELP & SUPPORT

@@DavidSoden yep, we were going to raise a ticket and noticed that the ticket was already raised the day before (4406775-ReadNFC feature is not working in power apps moible)! It is related to the new PowerApss version. Workaround helps but I hope Microsoft will fix this soon. Proposed workaroud: "While addressing the long-term solution, for short term resolution kindly proceed with publishing your application by setting the studio authoring version to 3.24092.19 and republishing the app."

I have confirmed with Microsoft that this will be fixed in 10.2 starting on 10/21/24 and available to all regions by 10/28)24. Hang tight! And use the workaround in the meantime.

@marti0 I received word from Microsoft that this has been resolved. I build a basic test app which is now working.... github.com/dtsoden/UA-camVideos/tree/main/NFC_Testing_App

Not 100% what your referring to but I believe your speaking to the gallery that only loads the first 100 rows of data at a time. If you scroll it gets the next... so on and so forth up to the default of 500, which you can change in settings to a maximum of 2000.

Thank you!

Thank you!

Thank you!

thanks!

Unfortunately no because of how dataverse and environments work. I question multiple instances as well because how the integration is with project for the web and the default environment. You would have to segment another way IMO. Lots of experiments trial and error. If you need something like that use another application likly a faster win.

Glad it helped.

--domains "<<Your Domain>>" :"<<Your Port>>"

thank you for the additional context - hard to believe in 2024 this video is still giving value, assumed this video had a shelf-life if about 1 year. 😁

Thanks for the kind words 😊

@@davidjimenez8952 thanks man

Thank you, glad it helped in some way.

Thanks, Janardhanan

@@r.zainalarifinfandisaputra dataverse tables and access are controlled typically through roles. So yes, your users are going to need to make sure they have the appropriate role assigned to them. I'm not sure if that's what you meant, but security is a topic that literally covers pages of written content. So before I write or reply a scroll, let's make sure I understand what you're asking.

@@DavidSoden Hi David, thanks for replying. It's related importing solution. In importing solution > connection for common data service dialog, it's default to my account. I'm just thinking that do I need to add all members in this section or no. But, yesterday I've just finished the import process and my team is able to access the project accelerator now. Another question David, related security roles. I saw Project Common, Project Owner, Project System, Project Team Member, and Project User. Should I just follow based on this role to setup the my team access to this project accelerator ?

@@r.zainalarifinfandisaputra this is a complicated topic as most of this is based on your needs and what your trying to accomplish. If you start here github.com/OfficeDev/Project-Accelerator?tab=readme-ov-file#deploying-the-solution for the official repo and deployment instructions, you will see a link that takes you to "An environment with the Project for the web solution in it. Learn more about deploying Project." that link takes you here... learn.microsoft.com/en-us/project-for-the-web/deploying-project and there you will see much of what you are likely seeking. You can customize anything you want based on your needs as this is an accelerator which means you can change up almost anything you want or need within reason.

@@DavidSoden I see, well noted David, thank you very much for your help.

Thanks for the kind words ☺️

thanks

see above as this is likely all related

IMO there are times and ways to change up the tech stack this may be one such example why to do such. Do you know about "private endpoints in Azure, and combined with a S2S VPN or ExpressRoute"? Power platform gateways are good, but there are times when... Also you can do desktop flows to power automate cloud flows, but its slow and messy IMO. In the end it's what you know. and what your allowed to spend, and what your allowed to do, and (sometimes who you know ;)

not without seeing the code. Clearcollect cleans the table empty then collects whatever you put in it. if you are checking the left side bar {X} icon, under "collections"... perhaps you need to refresh the variables/collections - this happens to me quite often and I think nothing has happened and it has

Do you have global admin rights? Can you find someone with these if not?

@@DavidSoden, yes I do have global admin rights...

@@deborahjoyous looks the same for me here so it may be something different on your tenant. Try opening a ticket with Microsoft?

@@DavidSoden, will do. Thanks!

@@DavidSoden, after quite a while with Microsoft, the result was that those instructions are for a Classic SP site. For Modern, you also have to go to the SP Admin Center, then select Active Sites > select the site in question > click Settings > Edit Custom Scripts > Allow. Save as Template appears immediately after that. Hope this helps others in the future!

Thanks for the kind words 😊

IME yes the ID column and values matched

It's because you do not have Power BI connected to its online service ($), and the Power BI service will do a scheduled refresh. This all has to be set up in the Power BI service one time. So the best thing you can do, which is not ideal at all, is manually refresh the report. This is okay for development and testing. Then you can re-publish the report and life goes on. In order to get the basic power bi service, it's like 10 bucks a month, last I checked.

Thank you David!

Thanks for stopping by. Glad it helped.

Hi Paul github.com/dtsoden/UA-camVideos is live and in the description of this video. Perhaps what your looking for I moved? Do you have the link that's not working and Ill dig deeper?

@@DavidSoden At 12:34 you reference a file called OpenAI_Global.yml which I do not see in the repo. I see AuthorizationConfiguration.jpg, AzureOpenAI.png, AzureOpenAI.yaml, OpenAI.png, and OpenAI.yml, but not the global one. I tried following using OpenAI.yml but I got stuck when trying to create the access token header because it said it was already a part of the request.

I've looked and looked online locally and can't find this file I must have accidentally deleted it. Apologies. The concept can be used with the available openAi file there.

@@DavidSoden Alright. I do believe I figured it out anyway. I will need to test with my organization still, but I was able to successfully run the test protocol without an authorization field so I think I'm in the clear. Thank you for your video!

@@pauldigerolamo1084 Glad this helped. and apologies again.

Thanks

Sorry I missed your comment. What is the specific error you are getting?

@@DavidSoden quit the same here. No se ha importado la solución "BTD-ExportExcel": Import Solution Failed: CustomControl with name contoso.excelexport failed to import with error: Principal user (Id=e8089609-adb5-ec11-983f-000d3ac05679, type=8, roleCount=5, privilegeCount=1533, accessMode='0 Read-Write', AADObjectId='01a07ca1-19b8-463e-8f91-a1ac602bb99a', MetadataCachePrivilegesCount=5183, businessUnitId=2c628de0-4a2d-eb11-bf68-000d3a88758c), is missing prvCreateCustomControl privilege (Id=036ed3c6-2dfd-4b98-9271-3bc72cba3586) on OTC=9753 for entity 'customcontrol' (LocalizedName='Control personalizado'). context.Caller=e8089609-adb5-ec11-983f-000d3ac05679. Consider adding missed privilege to one of the principal (user/team) roles.

Two things are a must. PAL association and owner. Not sure about disabled status. Gut says no. You'd have to test that.

Many thanks!

Glad to help

Thanks!

most welcome varzy 😊😊