- 7
- 120 130
DIYNOPRO
Germany
Приєднався 7 бер 2018
DoItYourself no professional
Burnt pot (still recoverable?) - Xmas Children's punch in solid form (burnt)
Who left the children's punch on the stove?
The children's punch was signaling "done" with smoke signals.
There is only coal left in the pot. A good opportunity to test a few substances.
I put the pot in warm water (should increase the reactivity). In total, I needed about 20 minutes for the action.
Maxxi Clean Backofen-Reiniger*: amzn.to/3EPn7pb
Bref Power Backofen & Grill, Backofenreiniger: https*://amzn.to/31UFpHa
Backpulver*: amzn.to/3dGCDrt
Kinderpunsch 1000ml*: amzn.to/3oMsTCC
*links are Affiliate-Links. If you click on the link and buy the product, I get payed for it from amazon. This does not have any effect on the product price
The children's punch was signaling "done" with smoke signals.
There is only coal left in the pot. A good opportunity to test a few substances.
I put the pot in warm water (should increase the reactivity). In total, I needed about 20 minutes for the action.
Maxxi Clean Backofen-Reiniger*: amzn.to/3EPn7pb
Bref Power Backofen & Grill, Backofenreiniger: https*://amzn.to/31UFpHa
Backpulver*: amzn.to/3dGCDrt
Kinderpunsch 1000ml*: amzn.to/3oMsTCC
*links are Affiliate-Links. If you click on the link and buy the product, I get payed for it from amazon. This does not have any effect on the product price
Переглядів: 30
Відео
DIY CPU stand board (PC tower) made from a beech board
Переглядів 7 тис.3 роки тому
The PCs are currently standing on polystyrene. That is neither beautiful nor practical. I make two boards from old beech board, put small rubber feet on them, oil them, and that's it. It looks nice and the curved board have found a great use in the home office. Don't be surprised, I don't have a workshop. Unfortunately, I've never had a room called a workshop. For years, I've had to use the gar...
Laminate damage 😲 - floor fixing (mini hole) - 5 minutes challenge (fastforward)
Переглядів 13 тис.3 роки тому
Unfortunately, there was an incident with a screwdriver. This time there is a small hole that can be repaired quickly. The challenge: repair in 5 minutes. The device for heating the wax is unfortunately no longer works, the tip is no longer warm. As a replacement, I take an electric soldering iron. This works well, it should not be too hot. Here is a link to a similar repair kit (US)*: amzn.to/...
restoration Nintendo Gameboy 1989 (DMG-01🕹) - step by step (cleaning and bleaching) - fastforward
Переглядів 3454 роки тому
I found an old Gameboy while cleaning up. The Gameboy had long disappeared from our house. Unfortunately there were still two batteries in the device over the years, which is not recommended. I disassembled the device and cleaned it thoroughly. I had to bleach/de-yellowing the casing with hydrogen peroxide. The screen protector was full of scratches which I was able to remove, but the protectio...
restoration vintage Stormtrooper (de-yellowing and paint) - the dark side in light (bleached☀)
Переглядів 14 тис.4 роки тому
This video shows how I restaurated my old Stormtrooper (1977). After 40 years the figure no longer looks good (body strongly yellowed). I tried bleaching (de-yellowing) the figure with hydrogen peroxide (3%), it works great. Now some other figures can look forward to this treatment (in summer). This video is not meant to be a manual. This video is not for children. Only adults should work with ...
cleaning and whitening (de-yellowing☀) vintage Star Wars R2-D2 12" - may the sun be with you
Переглядів 1,4 тис.4 роки тому
Star Wars vintage R2-D2 12" (series) / 8" (real size) - (most in fastforward) This video shows how I "restaurated" (de-yellowing) my old 12" R2-D2 (1978). After many years the figure no longer looked good (yellowed and dirty). I wanted to paint it. Then I discovered bleaching. The bleaching is a great way to put bright/white plastic back into a beautiful look. You need hydrogen peroxide for ble...
hole in the laminate floor fixing (fastforward) - The iron was stronger 😲
Переглядів 84 тис.5 років тому
Iron meets laminate - how angry is that? I'm not the causer but obviously the only one who still has hope to mend this hole improperly. The repair set has been in the basement for months. It was worth a try... Here is a link to a similar repair kit (US)*: amzn.to/2XnXS8V WAXKIT Softwax Kit, 20 Colors (US)*: amzn.to/2LWVY9Y I used a tile repair kit in the video (DE)*: amzn.to/2TxKSg3 Holz-Repara...
Is it yellowed again now? I've never had this technique last more than a few years on a dozens of items I used it on. And doing it multiple times isn't an option as each treatment breaks down the plastic further.
I happen to love yellow troopers. Send them my way.
I just superglued the piece that came off my floor and not a single person whos been in my living room since has ever mentioned it oncest lol. Great video though !
Hello, I'm from Trusted Media Brands, an LA-based media company. We saw your video and we hope to share it with our 200 million fans & potentially license it to our 600+ Clients! Please let us know if you're interested.
Not the best finish, probably would have been a better idea to not use the missing piece and paint on the pattern but it's a decent enough repair and should last. I'd have probably used a matt varnish though.
That is awesome! Thanks!
LoL I put rugs over my laminate floor because I don't want any hole.
If you leave the Stormtroopers inside the hydrogen peroxide too long they turn pink and red in different areas.
Yo tenía varios de esos, también dark vaders y yodas, pero como era pequeño los arruine todos y ahora veo que eran antiguos, no soy un boomer ni nada o sea en el 2010 era que tenía esos, los había encontrado super baratos en una venta de garage
Tal vez eran de la colección de alguien y tras morir pusieron sus cosas en venta
Hey, Great work! This is from Family Handyman. We are really interested in your video and want to partner with you. Please share your contact information email address or any social media handle where we can share the information with you. Thank you
Looking at stands for my PC and thought about building my own. This was a great and easy idea! Thanks!
Nice work on the stand.
Nice restoration. What brushes do you use? That looks like a real quality brush for that fine detail work.
What is the contact
how is he holding up?
Cool idea
I have one of these and although I want do this, there’s so many settings for a remnant or weathered one now it’s not necessarily necessary. Well done though you did a good job
did it affect the black colour at all? I would like to do multi coloured figures, can this method work well for those?
Just looking at the video, the black painted areas still look good. I'd love to get an expert opinion too, though. I've got a set of the old Republic Commando figures that I'm wanting to de-yellow, so I would also like to make sure they don't lose all the other colors, too
wtf. which products did you use and where did you get them. wtf is wrong with you
how annoying. what products are you using. is that wax. are you using something to heat it. how fking annoying
What is the last item used? For varnish seal?
Safekom wax repair kit
How long did this repair last?
Even without practice, the repair is done in 15 minutes. With a little practice it can be done even faster.
@@diynopro8360 i mean did you have to re-apply the wax
I have vinyl doll heads with yellow faces due to aging can i apply this trick?
I would guess that it works. But I don't really have any idea.
Starwars figures are lucky because the paint used appears unaffected (I say appears because I've never done this personally but watched many many vids on it)....my research had peoples saying that GI Joe figures aren't as lucky....some paints come off some don't.
Needs more explanation.
That will be $999.60 accept cash app Or Zelle
I am going to treat my army of stormtroopers with 3% pure + sun for the 2nd summer sun season. The first one worked.exactly as shown in this video.thanks...
I've done this a couple of years now. Use pure (not mixed with water) 3% peroxide and put it into a glass jar with lid, making a small opening in the lid with a nail. Then put it in strong sunlight. Mine were white in a couple of hours. Clean the figure with some soapy water and let it dry. For the black paint recovery on the figure I use permanent markers. You can get them in different thicknesses. Gives me a steady hand painting.
You say you've been doing this for a couple years. What are the very first figures you did this with looking like at this point? I've heard concern that they could end up worse than they did before after the two year mark....but I've never seen photos that back up or debunk this claim.
@@TheSickNeeds I've used the peroxide on stormtroopers, snowtroopers and biker scouts. Because of the low percentage peroxide they yellow again after a couple of months, but they are still beter than the original yellowed ones. Snowtroopers stay nicely white, but the biker scouts yellow enough to be annoyed. I should have used 6% peroxide for a better result.
@@justfrank3135 Thanks for the feedback on that! That is the first time I've seen someone give an "update" report. I'd love to know what the preferred environment to keep them in to prevent it in the first place. I have a Carbonite Han that has a yellowed chest and I'm pretty hesitant about doing anything with him. I haven't even done any troopers yet but I have a couple that are yellower than threepio so it makes sense to give it a try on those at least.
@@TheSickNeeds You're welcome! I keep my figures in zip baggies, but even those don't protect figures against yellowing. You could try putting Han's chest in a jar with peroxide. It must be a sealable jar, make sure there is a tiny hole in the lid. Put it in the summer sun for a couple of hours. I can't guarantee anything, but a loose Carbon Han is affordable. How long the plastic remains intact over time I can't tell. But old plastic leaks anyway and after centuries it will dissolve.
@@justfrank3135 appreciate the update. The Han in carbonite isn't all that affordable to me as the cheapest one on Ebay (modern day show and tell) that doesn't come with the carbonite slab has a current asking price of $114 plus shipping...other than a trashed one coming from Europe that would cost $50 to ship my way making it an even more expensive choice.....but I don't shop on Ebay anyways. Its pretty nonsense there these days.
Did you add some water with the peroxide ??? thanks for your answer.
No, only 3% peroxide. But I will also try 6% and 12%.
Would the decals get ruined in the water and bleach?
Just what I was thinking.
how to restore painting of the figure that is coming out I have an old figure, it looks perfect, but the top of the hair has faded a little. It was black and a little bluish. original figure how to restore faded hair? please
Don't work comes right back
After a year, the Stormtrooper still looks good. The yellowing has returned mini-minimally.
@@diynopro8360 what paint did you use
@@diynopro8360 How has it held up today? Would you say it needed another application? Can this procedure worsen the yellowing in any way after time?
NICE nice
That wasn't very yellow to start with. Mine's orange!
What paint did you use
Acrylic mainly used.
@@crazyellis what brand did you use
@@escottamezcua6814 acrylic paint is all the same in a way..need to pay for a good micro paintbrush horse hair if u can. Don't go cheap on the paint meaning some can be watery. You can always tape around the area so you don't mess up. But if you do it can easily wipe off before it dries.
Would this work on a 2006 Saga Commander Cody?
Dont bleaching devalues them and in a year or so it will look worse then it did before
@@steven6157 Ok; you ever wonder why Hasbro just doesn’t make the torso out of the limb plastic since the limbs don’t appear to go yellow?
Can never understand why a perfectly good vintage toy with "characteristic aging" needs to be bleached which will in the long term do more harm than good. Most collectors would cast a very curious eye over the new found whiteness and pass it up.
I agree with you to a point. But my R2D2 went a minging orange colour a few years back and I would love to display him. I don't want to sell him, its just my preference. The one in this video however was beautiful to start with and I wouldn't have bleached him.
That’s a good idea, great vid. The hardest part has gotta be lining up the grain pattern, especially on a light finish with detailed grain like this. TBH You could have just glued it and it would have been unnoticed by most, if the grain is correct.
Where to buy this ? My bed room floor having a small hole like yours..
Hi there...I think my wood flooring has the exact same finish as yours. Do you have any idea what it is? Or is just a laminate? Thanks!
It's just a laminate MDF wood
@@AjaxDas It's laminate flooring, NOT MDF board.
This deserves more attention
He devalued it by like 50 percent by bleaching it
which paint did you use to paint it?
Amazing results!
Nicely done, looks great.
Took Way too long for that result which was just okay. Not great.
Can we see some of your efforts please so we can be the judges on your work 🤔
your a hater
I got more likes on my comment than you did on your video.😆😆
@@jimgeelan5949 he is right. It sucks.
@@pontikas😂just as good as your momma