Відео

I also found issues when utilizing pre loaded images however when using clean images from scratch configuration worked with ease. Glad you got it working : )

Where do you get the joystick and buttons from? Any link? I want to get a nice sanwa set

@@mannyjoseph4520 just search ali express- the ones on this link should work just fine; www.aliexpress.com/item/1005006104888481.html?spm=a2g0o.productlist.main.13.4a57kv98kv98XC&algo_pvid=68ef2501-661b-4037-a83d-0422432a8d25&algo_exp_id=68ef2501-661b-4037-a83d-0422432a8d25-6&pdp_npi=4%40dis%21AUD%219.51%218.92%21%21%2145.03%2142.23%21%402101c71a17172392594537406e1442%2112000035766242561%21sea%21AU%21143731637%21&curPageLogUid=2Rxg8DCZrLo7&utparam-url=scene%3Asearch%7Cquery_from%3A www.aliexpress.com/item/1005006461513048.html?spm=a2g0o.productlist.main.19.7e3f66d09ecjEZ&algo_pvid=9b739279-41c9-4db0-8f74-a06454040ced&algo_exp_id=9b739279-41c9-4db0-8f74-a06454040ced-9&pdp_npi=4%40dis%21AUD%218.96%218.96%21%21%2142.41%2142.41%21%402101c80017172394408723757e38a9%2112000037281213857%21sea%21AU%21143731637%21&curPageLogUid=HKGv9W5QBjFW&utparam-url=scene%3Asearch%7Cquery_from%3A

Hey mate, to set up the joysticks and buttons you have to run a script when first fire up emulationstation. There should be instructions that simply guide you through the scripts. Otherwise jaycar website has the guide on their website. As far as the buttons, they are your generic sanwa Chinese arcade joystick and buttons that you can buy through wish / ebay / aliexpress. Just disconnect and reconnect new ones. There should be links in my video to the above and comments section has some further guides 👍🏻

Hey mate I think it comes down to the type of arcade stick and buttons you have. It comes stock with an 8 way stick. I replaced the stock ones with another 8 way stick and some clear buttons from ali express however made no difference with gameplay. The stock controls and the ones I replaced them with are cheap. I found I could pull of moves however takes a little bit of practice. I would say if you can find higher quality 8 way joysticks and buttons and swap them out then you would have improved gameplay.

@arlosarcades got it bro. The controller I have is the one who cokes in the original jaycar 10" screen, for hack slash it's ok, but for fighting games...my God.. very poor. I have a Chinese snes controller who works 10x better then the jaycar arcade controller for fighting games

@ruriabrandao yeah man, I usually stick to shmups, side scrollers and other basic games on this device. Street fighter 3 Max alpha on PSP allows 1 button special moves configs so that is good on this device. More of a display, talking piece and something to have in a man cave or just somewhere convenient to have a quick play. I personally use controllers as well and plug them into the Pi/ pc for fighting games.

Hey man really appreciate the comment! Yeah having a blast with the guns and sure you will too. Have fun mate.

Glad you enjoyed some aspects of the content 👍

Sorry was not up to your speed mate. Always happy to take on criticism though 👍

Lol, never know what you may come across in the outback ........ 🦘🐖👻👽

Glad to hear you enjoyed the review mate. Have fun with the device : )

Thanks for the review mate

@gerbohuisma Thank you, appreciate the comment 🙂👍

Hopefully supply slowly increases. Good luck with your arcade mate 😀

@@arlosarcades thanks

Alot of configuration required, I would advise against it. I have since moved to batocera as I have found it a bit more stable.

Perhaps this image just isn't compatible with a PI400?

@@plugexpert Hey mate, sorry not sure as I have not tried it. Image should work with Pi4 regardless. Have not played or tinkered around with it for a while and have moved towards PC as of late.

I just use the trigger button, the button under the controller to shoot.

Thanks for the reply. Yea it works on a few games, but for a lot it says Press Start & I cannot. Even tried connecting a ps4 controller with Bluetooth in hopes of using that then switching back to the Wiimote. No luck.

@@Fruitdinosoffical You may have to go into the retroarch and designate the start button. Honestly it is a bit tricky and mucks up a bit. There are quite a few tutorials on you tube that can assist.

Hey mate, file path as follows within Game folder; House of the Dead Scarlet Dawn\App\Hodzero\WindowsNoEditor\AMDaemon\amdaemon.exe

@@arlosarcades thanks. Since Mark Penwarden channel is gone but i wanna replay this

Glad you got it working in the end mate! There is always something with these devices hey lol. Yeah I found it easiest to build my own image and rip roms from pre built images when using this device in particular. Again glad you got yours working, happy gaming : )

Most definatley, just have to fit in time between work lol!

Hey mate trust me is is a nightmare at first. Not an expert with this kind of stuff however out of like 20 pre made images I downloaded the script would only work on like 5. It is best to start from scratch, build your own image and go from there. I have not used it with recalbox or batocera however it works great on retripie images. Follow these steps if you have not done so already (the steps in between the +++++++++++++++ is where I think you may be finding issues; - Ensure you have your wifi set up on your image (again start from fresh). - Press F4 or ctrl + alt then F4 on a keyboard plugged into the PI whilst in the generic retropie menu where you toggle games / systems etc. - Enter the following script exactly as is, line by line, letting the appropriate loads take place; sudo apt update sudo apt install git python3-dev -y git clone github.com/mholgatem/GPIOnext.git cd GPIOnext sudo chmod +x * sudo ./install.sh I recall that you will then be asked if you want to allocate controller or something like that, enter y for yes and enter. ++++++++++++++++++++++++++++++++++++++++++++++++++ It will then ask you how many control sticks or or something similar, select 1 and press enter. On the next screen there should be a list of buttons include start and select from memory. As there are 8 buttons on this particular arcade, you need to press the space bar which will log and x next to the first button, press down, press space bar to log another x and so on and so forth. You need to have and x selected next to 8 buttons, it does not matter what buttons, just ensure you have placed and x next to 8 buttons succinctly in order. Press enter and from memory it will take you to the page where you need to input the buttons. First it will tell you to input the joystick, hold up on the joystick when it says up, hold the joystick down when it says down, right then left. It will then list the buttons with start and select then list another 6 buttons. It does not matter what order you press the buttons however when it prompts you hold the button down until it registers and prompts you for another button. I generally press the to smaller buttons at the top when it asks for start and select in any case. once this is done I think you just save and exit when it prompts you. When you are back in the command prompt, input emulationstation to take you back to the retropie menu. +++++++++++++++++++++++++++++++++++++++++++++++++ This is where you will need a generic controller of some sort that you can generally use with a PI. I use a third party PS3 controller I bought from Big w, wired xbox 360 controllers from eb games work well too. I am sure you can use a keyboard as well however at time of writing can't recall the button, maybe enter. You now simply have to go to the emulationstation menu you access by pressing start, the menu where you can input the buttons for a controller, the one in the below link; core-electronics.com.au/guides/how-to-pair-and-map-8bitdo-sf30-pro-controller/ Select configure input- you should now see another gamepad detected, that is the arcade buttons and joystick. Hold down one of the buttons to take you to the next screen. When you are prompted to set up the controller / buttons / joystick the arcade joystick and buttons will now work. I input start and select as the two small buttons at the top, allocate the bottom 3 (a,b,x) and the top left button on the top as y. I skip from 'left shoulder' right until the hotkey. To skip button inputs, hold down a button already selected. When it asks you for a hot key I select top right button (3rd on top from the left) Now you should be good to go. This setup generally works well for the majority of systems. Holding down the hotkey and then start will exit games etc. There is a list on google for the shortcut keys in retropie. Hope this helps mate, let me know if any further issues.

@@arlosarcades oh, my lord :).. what a fantastic walkthru :)... i will try this tomorrow, and report back :).. oh, yeah, i m using a 4 gig pi 4 .. i,ll be back, hopefully with a smile on the dial..oh! can the monitor of the machine be changed to english menus? (im not game to play with it in case i cant revert back, lol ) cheers! :)

@@anton69ize No issues mate, I am sure it will work. If not I will look at doing a video tutorial for you. Yes you can change the language to English. On the top of the arcade press the menu button + press volume down 4 times until you get to the OSD menu + press menu twice + select english and done. Let me know how you go, good luck!

@@arlosarcades mate thank you! Jb hifi have had mega loads of these returned because of trying to get the joystick going on the gpio. you would think they would include a tutorial..i think most people who returned them were most likely using old images and was just messing up trying to add those gpio drivers :(.. i tell you what, i was getting so wild, i almost contemplated buying a $10 usb encoder of ebay and running the joystick that way, i reckon that would be easier to learn, lol :)

@@anton69ize Yeah the instructions that are provided are only for the scripts to be installed, no other context around what else needs to be done. It is not geared towards the average arcade enthusiast as you need a very small degree of knowledge when it comes to the PI and coding etc. Again if no luck I will do a video tutorial and load it on my page.

Sorry no, controls can be a bit tricky to set up. I have since moved to batocera and am toying around with a new build, find it a bit more reliable.

Have not used the pi 400 as of yet, intend on doing so 👍Unfortunatley to big for this build i think.

@@arlosarcades I can confirm the Pi 400 does not fit. Just tested it.

@@arlosarcades so the default joystick is really bad with this cabinet. Almost impossible to pull off moves in street fighter. Can you send me link to joystick and buttons you purchased?

@@berva I can't recall how receptive the stock joystick was when I bought it however the ones I am using now works perfectly with a whole heap of fighting games etc; www.aliexpress.com/item/4001162695420.html?spm=a2g0o.order_list.0.0.21ef1802e06Jov The store is good, think it may actually be the same kind of stick though. Maybe you have a dodgy joystick, I know some of the earlier arcade I bought had dodgy components until I swapped them out. Let me know if you end up swapping it out and if the new one is better. Good luck.

Thanks 😁

I would say that aside from the new HOTD remake this version was one if the frontrunners in the series so far 👍

Thanks Clayton, it is my first ever benchtop arcade machine I configured 😁

Thanks man, glad you enjoyed it. Hopefully add more content soon 👍

Girls love it and will be good when has custom game images and in a cabinet 👍

Hello, did not need to setup anything in game. This is the pc version. Download from here fitgirl-repacks.site/the-house-of-the-dead-remake/#comments

@@arlosarcades thank you, very much

@@jesusjimenez-tv5ho No problems; bit.ly/3sbJ6SY Download this link and copy files over and replace in the root folder. In the game press F1 and setup up the guns. Make sure to select cooperative mode and you can now play 2 player. Of note you can only use the handgun. Enjoy