Відео

What brand of diverter did you install and the kit for the remote set up? Was that all in one package under a part number?

I think your plan to over seed your pasture is a great idea I was thinking of the same, I would like to see your results I think it will be the same as if you use a 30,ooo dollar drill ,my hat is off to you! we need more farmers that think outside the box instead of what the seed salesmen says.

Maybe figure out the gasket before you put the sealant on and then mark the spot. Thanks for the help though great video.

Thank you sir!

Great video. My water pump went out on my 03 Century and I thought it would be a nightmare. It was super easy with the help of your video. Thank you.

What model tractor?

My HD8 is doing the same thing. Will not accelerate for shit. I was thinking bad gas. But now that you mention the fuel pump...

Do a 5090e same filter problem. So now im a rip'n it off. Ffs

Good information. Thank you.

Great to see that job I’m about to do myself - helps a lot, thank you. Tip: A little video editing would really improve the viewing experience in my humble opinion.

Old school is old school tractor old school sickle bar mower and then a thermos full of coffee now you are doing it old school

watch the left hand turns when your pulling it in transport position

How much does the disc weigh?

I still have 2 451 9 foot mowers that we use some. I always use the palms of both hands flat on the sickle bar and walk it hand over hand to fold it. Nice mowers. They are 3 point hookup the the tractor.

They still use sickle bars in the combine heads cutting soybeans etc. so, its not really old technology.

Does that filter have the correct bypass 23psi rating I’ve been using wix or Subaru filters the black ones blue ones are cheaply made

4:23 this is about the point where I break the head of the bolt off and spend the next day drilling and tapping the damn thing. I love how those 8mm bolts just spin right off of there for you.

How many acres were you working with it?

Sparkplugs

Super

😂😂😂

Do you think it would handle an 11ft wide 1,500 lb flail mower on 2 to 1 slopes equipped with much wider tires for sideways stability?

You do know that MOST of the bolts do NOT need to be removed? (The bottom left, and perhaps the upper ones. Better yet, remove the support bracket! Not the 3 for the motor) Just loosened enough to slide them out of the hole at the top of the slot!

Que tal estimado. Con todo el respeto que mereces, me gustaria indicarte algunos puntos que te ayudarán. - Luego de sacar el tapon con el motor caliente, se deja escurrir lo mas posible. - Se saca el filtro y se aprovecha a escurrir algo mas de aceite que hay en las galerias. - aprovechando la posicion vertical hacia arriba del filtro, es mejor cargarlo de aceite previamente. (Cuidar mucho la limpieza) Y por ultimo de todo, al momento de poner el aceite, colocar el tapón. Todo lo mas que podamos dejar escurrir, es suciedad que estamos retirando y dandole mayor vida util al aceite nuevo. - cuando coloquen el filtro, pasen aceite nuevo en la junta y aprieten a mano solamente. Luego revisan pérdidas. Recuerden que con el calor, la junta se vulcaniza y cuesta después sacar el filtro. Usen repuesto original siempre que esté disponible. Eso vale para toda marca de motor. Saludos a todos

I’m having similar issues , did your check engine light come on as well ??

My dad used to have me do the same thing only we used a John Deere 40S with a semi mounted #5 Deere sickle mower with a 6' knife. It took quite a while but I didn't care I was driving a tractor which I still love to do some 50 years later.

❤

Do you have a link or part # to the buddy seat by chance?

I take the cover off next to my gear shifter and I can see down in my gearbox but I have no oil in there. But when I go by the right back wheel and check the dipstick is showing it full what am I missing here or does the gearbox not really have oil in it

How do u like vavoline in your sub

We did that back on the farm. We had a NH 451. We would set the sickle angle up so that it would cut taller. We mowed pastures with a sickle mower for a few reasons: (1) cut down the weeds to allow the grass to grow better. (2) Removing the weed kept them from irritating the cattle's eyes. (3) Using the sickle mower also broke up the manure patties distribution the "free" fertilizer". (4) It was easier and more maneuverable around tight places in the field and allowed closer cuts to the fence line. (5) If you had a small erosion areas you can lay the sickle bar across the spot and cut the weed off. (6) Using a sickle bar allowed us to cut a little steeper grades (i.e. hillsides and pond banks.) (7) Brush Hogs left a rougher cut which dad didn't like. Brush Hogging was used for area that had brush larger than your thumb. or areas the was semi rough and rocky.

Thank you for posting this. Followed each step. Didn't finish in 26 minutes but wasn't in a hurry. Made it so much easier.

👎👎 Your camera operator needs to work on keeping what you are working on in the CENTER of the frame, and IN FOCUS. This video would have been great, but maybe next time it will be better.

He's the Best damn Grill Cook in his whole neighborhood, could tell just from this video.

2018 defender... Cranks up fine idols, OK. But soon as you try to give it gas, it jumps and sputters and Spitz. Nobody's got a good idea, I guess.

I love you

Yours tilts up a lot more than mine. My 456 only comes up about 2 feet on the end. I wonder why.

Thanks for not editing out the hiccups and real world struggles!

Thanks for the video. What hydraulic oil did you use? Did you find a definitive reference of the correct fluid?

How did the beef turnout? Where the ribeyes good?

Smae problem I've replaced filter,pump, injectors , throttle body , cdi box and $3k later still idles fine but jumps bucks and dies intermittently 2018 hd8

Every oil change you needa change the fuel filter to ???

Not difficult to fix the odometer issue with several 150 ohm resistors soldered back where they have fallen off

Time to change on my denali duramax..thanks sir

Nice video.. I have a 2002 I inherited from my sister. LOVE it, it's my daily driver for work 7 miles one way.. Drives great.. Heavy/smooth.. Better than a new caddy.! Looks like your Odometer isn't working like mine..? Want to replace the whole cluster but Rock Auto doesn't have any in stock just now.. Going to replace the whole a/c setup. Hasn't worked for 12 years and am tired of the damn hot summer heat here in Central WA State..

You pronounce Corriente all fucked up.

Was this the first time you replaced the fuel filter? Was just wondering because it said you had like 57 percent left. Was just trying to see if it goes by miles or if it can sense it. Thanks for your time.

Mr Hayworth just wanted to say thank you for this video it's helping my out at the right time.i have a question I just bought 2022 chevy silverado 2500hd with a 6.6 duramax is this the same set up it?is the 15 mm bolt for the oil pan underneath the truck the same as yours? Also will the 2022 model take the same amount of oil as your truck?

What? ? Why do you always kill us males? What have we males ever done to hurt you?? 🤣😜

Thanks ever considered a PPE larger oil filter?