Відео

What kind of color can I add? What kind of sealer? Also How much to buy for a 20x8 ft. patio?

Does the multi surface acrylic bind to the dtm ??

Do you have to seal it?

Really? Slagging off designers as “dishonest,” then saying “whites are a shade?” 😂 My guy, that word does not mean what you think it means. And there is no such thing as “true” anything in a discussion about color. Once again, painters displaying their total lack of understanding about color. Please nobody listen to these dummies.

does this work on concrete block

Solid stain sits on top of the wood. 100%

You guys are characters ;D

Can you use it on tile floors?

thanks, very helpful!

What is the best product to use like in a bathroom where the paint is blistering from too much moisture? I scraped the areas and replastered the spots, then primed and painted but it started blistering again about a year later

I always tell people that BIN primers claim to fame is that it sticks to everything.. and for people who have never used it.. BIN has a very strong odor but it's worth using

Shellac is made from bugs shells not poop.

I need a bonding primer that will cover OIL based paint

I read a lot about white, I try 10 white samples 🤣😅 but the location I am is horrible too choose a wall color. I work in design paint domain many years ago’s but not with Benjamin Moore or Sherwin williams, I read many blog to understand the type of undertones, and company vibe. But I am so happy to try with « samplize » best way to test color. The way people in blog, YT, designer, name it, (all over) describe color in my home, nothing look like that 😆 Pure white look beautiful on the sample, in the home of my friend … but in my home H***F***😅 it’s look like drywall not paint and dingy … I start with 4 theorical wonderful whites, but the reality is nothing look good in that first 4 samples! After that fail, I look the white samples on wall and I move to that, ok this look too dark what is the LRV, ok this look so dingy no with this undertone. I finish to find the right one in that way 😅 I have very good knowledge about paint, design, environnment, undertone and white it’s the more difficult color the choose 😅 I am so happy to finaly check the box to chose a white paint 😆! After that choose the color for doors, island are so simple and only put 3 samples and 15 min after my choose are donne at 95% just verify variation during the day White the light.

Should I just throw out my oil based paint?

I used the 3/4" WHIZZ version of that polyamide roller on my popcorn ceilings (they had already been painted) and it performed great. It didn't leave any fibers behind and washed out way easier than a microfiber. I haven't used a polyamide roller on my walls though. I'll have to give that a try in the 1/2" version. Thanks for the video!

I just did limewash indoors and had a hell of a time with it!! 1. The brick is indoors and you can't pressure wash inside a house. So I had to clean the bricks individually with a spray bottle and a rag. Very tedious! Also, you can't just use a big scrub brush with a bucket and clean it like you would a floor or shower because the brick absorbs the dirt that you're scrubbing off if you don't wipe it off right away, and when it absorbs the dirt, it leaves a murky white haze, which wouldn't have been an issue if I was only going for painting it white and wasn't going for the rustic partially revealed brick look. 2. It sets up super fast so it's hard to get it to spray off if you don't do it within the first few minutes of application. 3. With doing it indoors, I made a heck of a mess! Even with putting down plastic and taping it up onto the brick, It caused damage to my hardwood floors, to the point that floor boards popped up. 4. Some bricks were chalky and were bleeding through the limewash and causing the white to turn yellow like pee tinged yellow... yuck! I'm guessing the primer could have helped the situation? However, I didn't have any on hand and had no idea that it existed or that I needed it. 5. Issue with where to remove and the method of doing the removal. Spraying it caused it to run down onto the other brick, and with the brick bleeding, the runs were either yellow or pink from the orange and red brick. I ended up having to leave those bricks mostly exposed, otherwise they would have looked gross, which kinda defeated the look I was going for. 6. The main issue is that I'm inexperienced and had no idea what the hell I was doing. It seemed to work out well for so many others in the youtube videos, but I guess they had good brick to work with in the first place. In my situation it was a brick wall from a chimney. I spent over a full week on 2 small brick walls as all of this caused issues that took so much time to undo, redo, and figure out. Was a very aggravating process!! Do you guys ever run into these kind of issues??????

have yall used porch and floor indoors? just painted it on wooden stairs . to hide footprints and dust in general would a poly or some kind of sealer make sense?

Maybe show us how yo dilute the primer.

If the peel stop is clear, and the color I am covering is dark, relative to the new top coat, shouldn’t I be using a white tinted primer? The peel stop I purchased from Benjamin Moore is clear and I think it states, on the label, that it isn’t tintable .

Is that pro classic just acrylic latex or does it contain oil?

Enamel is oil-based; latex is water-based.

We’re I can buy this product?

Question, can you paint a urethane primer car paint (2k) over a tin/lead repair that is on the roof of a car ?

just get to the point guys

good video . just two guys discussing the whole thing from all angles and getting right to the point , don't have to spend my time listening to how your wife baked cookies this morning or all the "trying to make the video all exciting with over the top intros graphics music and comedy routines" ...... Thanks guys ...... and i will say this , they do have good adhesion , probably stick better than many (not all) water based primers , but they DON'T "stainblock" so people need to beware using them as a basecoat .... They'll stick quite well , won't block stains though

What about pure white for exterior trim?

How do you get your masonry flat paint tinted?

Can you paint a metal bathtub with Eggshell or Satin DTM?

When you use BIN on a whole-house interior project, like the one you referred to with the cats, how did you apply it? Did you use a sprayer (or would you suggest that)?

Question from a fellow painter, On a job where certain walls keep blistering/bubbling. Ive primed they pop out, ive skim coated with mud they pop out and pva they pop out, put in a dehumidifier nothing works. Any thoughts

If that thing has any sand in it please don’t even mention the sprayer, any sand in the sprayer will destroy the cylinder,

How can we prepare sand paber? Please help me ? Thank you

Thank you so much

Pro extra does come with a fat boy angled. I have it.

Mosquito advantage is awesome!

Can it be used on white brick facade (1976). Pressure washing doesn’t bring facade back to original look. .

Proform - Picasso.

What kind of primer do you use for enamel paint?

Limewash is great and I've used it alot, not the same as what is often referred to as a mineral paint which is a different product... also amazed you'd put your fingers in the lime mix and not wash it off straight away as it eats skin as it's highly alkaline. Not suitable for contact unless you want bleeding fingers.

Also you somehow skipped the alkyd urethane. The more widely used product as far my experience has shown. It was originally a Frazee paint product that Sherwinn labeled as their own after their hostile take over and monopolizing of the market. Miss frazee was my go to store for forever

Risking be judgmental… I feel like we got a couple of kids that have hardly painted sh!t in their life giving us info their not qualified to deliver

Would you recommend snowbound for interior walls and trim in different sheens?

Thanks for the video. My friend recommended Kel-Bond that’s how I found your video. Question: I want to skimcoat my textured walls/ceilings in my home which have been pained with paint that has some sheen to it. Would Kel-Bond work to prime the existing paint before I skimcoat over it?

6:06 Acetone for testing which your existing paint is.

Can you put water on top of Acrylic latex?

I have the Percy colossus roller however I find when I use them once and wash them they go extremely fluffy and leaves fluff everywhere

It's not confusing at all. However, your information is disorganized, rambling, and not cohesive. Also an excessively long video. Get to the point. Cut out the banter and small talk. Give us the facts in 2 mins straight. Like this: 3 types of paint: Acrylic (Latex) wall paint, water based. Enamel (source unknown) water based for trim Enamel Oil based, for trim. Primer - Acrylic water based. Can take any paint over it. Primer - Enamel oil based. Can take any paint over it. In fact, when I painted my RV walls, I used Oil based Primer Kilz and then roller brushed latex (acrylic) paint and it held up very well. Walls were 1/8 luan with vinyl wallpaper. I sanded the wall paper then primed and painted. In this case, the oil based primer was better than the water based primer due to plastic walls. No I could not remove the plastic wallpaper as it had structural value..

I'm wondering if this "urethane paint" formulation is same or similar to car paint? Can you thin/reduce this paint; or catalyze it (as they do for car paints)? Can you use the paint you are showcasing as car paint?

Which Centurion are you talking about? 2800? 400? You talk a lot but don't give much information. 2800 needs a catalyst and 400 isn't a polyurethane.