Відео

What do you mean with "standard"? There are more styles of diagnostic connector used over the times and manufacturers. Just check it under the seat. :) New Teneres with color TFT displays are equipped with red 6-pin connector used also on most latest Japanese bikes.

@@OGafanhoto Thank you! You can activate the Dongle during riding. Then for completion of the Traction Control deactivation you must briefly release thrortle and for ABS you must briefly stop. When ECU detects zero speed, then it immediatelly deactivate the ABS. Reactivation can be done even during riding.

@@lskmotorcycleelectronics7444 oh ok, so similar to the OEM setup except you only press 1 button! Correct me if i'm wrong, but this is the "same part" that remembers the settings after cycling the key, right? Thanks man, take care and ride safe!

@@OGafanhoto It is remember the state of the Dongle (all off / or settings from the dashboard). So if you let the Dongle active (ABS+TC off), it will remain the same after cycling the key. Thank you! Also to you! :)

Hi. Just rear. Transalp's ECU doesn't allow to disable front ABS at all.

Just a note - together with switching rear ABS off, the front ABS is switched to Off-Road mode (less sensitive).

And it stays off.

@@gronno Yes, until you push the down button again.

Thanks for your feedback and I'm glad you like the product! That's nice to hear.

Hi, this is something which should not happen. Please contact us on email. You will find it at www.lskelectronics.com/contact - we will help you to solve it out. :)

@@lskmotorcycleelectronics7444 I sent a message through the contact form.

Hi, could you please write me type and year of your bike?

@@lskmotorcycleelectronics7444 hi its a 1984 kawasaki Gpz 750 a1 thanks

@@paulgee5068 Give it directly behind the tank outlet.

Thank you! 😊

No, it fits only backward.

@@lskmotorcycleelectronics7444 shame 😞

No, just rear one.

Yes. From technical reason it is blinking once per few seconds when the bike is moving.

Yes, even 3M in the technical sheet recommend the heating with hairdryer and strong pushing to increase adhesion. Adhesion is also better later after some time than immediatelly after aplication. But from our experience, even after sticking it is holding enough for using. We had no problems and no complaints about that. The surface must be clean, ideally cleaned with alcohol or even better with isopropylalkohol.

No problem. You can order it here: www.lskelectronics.com/store/CNC-Machined-Fuel-Cap-Holder-for-Yamaha-Tenere-700-p619105725 😁

Yes, if you have 4 connectors, you have the older version. Difference is only in connection style. Once you connect it, it is doing exactly the same. 👍

@@lskmotorcycleelectronics7444 all fitted. Works perfect 👌🏻.

No. Only the rear one. Bike does not allow disconnecting front ABS at all.

Yes. In actual version the dongle is placed in the box with built-in bracket. We also reduced the harness to just one wire going to the diagnostic plug. Installation video here: ua-cam.com/video/jZawJfQCDpo/v-deo.htmlsi=ohRLowKzcfDoNYYH

@@lskmotorcycleelectronics7444 Thankyou. Just received mine and thought I might have been missing the bracket

We have one 2023 (color TFT display) and it is not accurate. When it shows last point of fuel, there is still maybe 150km range. I expect that 2024 model is without the changes.

No, it is really end of the production. We are manufacturing these gauges for many years and now it is a time to move to new things. :)

Hi, it is our prototype, absolutely unique matrix lights which working as cornering lights, they can switch betweeen low beam pattern and high beam pattern and DRL function. They also have amazing power output and they are copying actual state of the main light on the Africa Twin. But due to problems with making them road-use legal, they have never been pushed to series production. Its a pity.

Thank you for the answe but i mean only the Mount for the LED Lamp can i buy it (only the mount)

Not interested, thanks.

@@lskmotorcycleelectronics7444 Ok Sir

On Tenere with black/white LCD dashboard you can control rear ABS also during riding. Off-road mode (rear+front ABS off) can be controlled only when the bike is still.

It is due to big demand. Waiting time is ca 1 week but we are continuously increasing manufacturing capacity. Within few weeks we should have enough pieces in stock. :)

Yes, it is compatible with 2024 models.

Yes, tested! 👍

@lskmotorcycleelectronics7444 I ended up buying a used 2020 base and installed your dongle. Mine had no 12v accessory, but the dead-end plug was still there. BTW, do you have experience with speedo dongles for an AT? Mine had a 15 tooth front Sprocket, which I like for off-road and heavy loads, but my speedo reads about 13km faster, and mpg data will be off. I have heard of dongles but don't know if they are easy plug n play for AT? I assume they would correct all computer data?

I will take care about that.

I phoned rugged roads but the person I spoke to didn't know when or if thay would get them.

@@JohnSmith-ef8nr Please wait a few days and try again. It's just a few days after release, and it takes some time for our dealers to receive and list them. 👍

I think that it will be coded in the ECU and not accessible from outside.

@@lskmotorcycleelectronics7444 That’s a shame, you have created some great additions above the standard bikes controls, was hoping it might be something you would’ve been able to tackle, but if it’s in the ecu, I guess not. Thanks for replying.

This bike is 2024 EU version. But it works the same on all versions with color display dashboard

Ot is for turning on/off all electronic assistants with single click on star button on left handlebar. Moreover it kills the safery message after every new start of the bike.