Відео

I am going down the rabbit hole of buying old broken Hi-Fi gear to try and repair them. It's fun little projects. Glad you fixed this one Paul!

Instead of sneaking the glue underneath, why not just apply before you place the part on?

You're not holding it right :) Glad to have found your channel Paul! It is a well kept secret. Thank you for making these videos for us.

I have a Mack cluster that also won't illuminate anymore are you still fixing these and ballpark how much it's out of 01 Mack looks very similar to that one

Thank you!!!

Nice video. What usb 3.0 card is that?

Woah! Never expected to hear Wintergatan music in a random video. Another track found in the rejected demos folder!

We all need a Lenny😂

The music gets in my head.

Louis sent me here. Unironcally, i have a similar problem on a similar model. I got a replacement when i bought the original one as a failsafe, but your video may have the guide to see what i can fix on the old pair. (The right side is dangling by the wire...)

Louis sent me here! Didn't know you had a channel, Paul. So sub'd. I well remember your work with Louis in NYC.

Great work, Paul. I have a different version of these headphones & know what to do when it breaks.

Thank you

Where do I get the usb A piece

I had Box Brownie 58 years ago and then progressed to an Instagram 35. In 1993 I purchase a Pentax Z10 and was told it was a good camera so I dumped the Pentax 35mm lens and got a Sigma 35mm and 80 to 210mm zoom for the same price. Cost me AUD$530+ Duty Free at the time so saved about 20% on retail. Time to put it on eBay with all the bits I got, reasonable Flash and filters, lens protectors. I lied that camera. *Thank you* for the video Paul and especially for how the locking bar works. Always wondered how it held the cable in and never realised the side cut-outs were an important part of that. 👍👍

I keep coming back to this video hoping you have found a better fix. I have a replacement switch, but I keep repairing the affected contact. Any updates? I may just replace it with a toggle. An 18V high current relay might work… I just need time to sit down a draw out the schematic.

5:30 Paul, have you noticed that with aftermarket batteries (not sure if all do this?) that even with the data cable disconnected , the machine will still boot with only the battery screw fitted. That is my experience with the crap Chinese batteries that I can get in Australia. I totally blame Paul Daniels, I am sure that he is behind this behaviour 🤣 I think that it may be something to do with SYS_DETECT_L on the crappy BMS board of these batteries?

Seems that you openend these things a lot of times... personally i never seen these headphone in my life.

It is crazy how tiny all this soldering against your micro pencil. I guess that dead bug picture that you have in Google is from time with Luis? Do you have/use preheater station? Do you always get this strange works that failed in other shops? . About SPAM calls, have you tried to use truecaller application ? About tip cleaning, have you tried to use Ammonium chloride solution in water ?

Did you know there is a food you can feed to the cat that stops the cat producing that protein that makes you allergic to them & it's been really quite effective for majority of people (worth looking into)

Thank you for sharing a video Paul. Appreciate you sharing your craft. Good tip with the battery removal. I can't always catch the live stream and end up watching later on.

these dung-sifters speak fluent gibberish

Can't believe I just watched 1hr and 50 mins of a circuit board repair!!

600 views when its worth at least 100k

Mine is only 4 months old and used probably 20 times. It already is having issues. Only 14 going to the motor with a fully charged battery. I replaced the switch will be ok for a while. Poor design. I love all my other Ryobi tools.

What is the little black key and the top, if that is broken can you still replace the key?

As someone who has a stick drifting PS5 controller, and is now finally getting some hall effect stick replacements, yeah... That analysis is spot on ESPECIALLY for people like me who were hardcore LittleBIGPlanet players back on PS3, slap attacks basically required you to do this: 1:48:38 (Not only that, but to also to animate Sackboy's body and arms) The time that I finally figured out that my controller had stick drift was while I was playing God of War to test my new laptop. It was the exact stick I used to slap away annoying players.

Paul S #1 <3 Paul!

Saving more under engineered electronics from landfill. Nice job Paul

I love industrial design, but it seems to me that if the horse-shoe was just horse-shoe shaped without a tang, there would be more plastic and it might last longer.. ahhh.. I see it now..

You mean to say that Sony won't sell you any parts? 🙄🤡

I have a aem v1, can you repair it? Idle control doesnt work

Hi. I've had my 2021 14 inch MBP brand new now for two years and all of a sudden the screen went gray. On bootup, the Apple logo is visible, but fuzzy. Everything else goes gray. The laptop still works fine as I have connected it to an external monitor, but Apple wants me to pay $450 to replace the screen. Could my issue just be the result of the lid angle sensor? BTW, no damage on my laptop as I have babied it since I got it. Thanks.

Why does everybody always feel the need to shame certain brands? Maybe Ryobi isn't the most high performance brand but I can tell you one thing, in the small right angle grinder niche, they make the best one that there is, with a variable speed trigger and it's smooth as hell. Way better than the equivalent from Makita or Milwaukee. Way way better. They typically have more innovative stuff, even if they're not super high performance. I think the days of shaming Ryobi should be over. Update: okay I admit that as a shitty switch though...

lol that guy is talking nonsense i did fixed 2 controllers 2 days ago from my cousins ps5 they both had drift i only did that by solder and solder wick nothing else fun fact i just soldered directly the hall effect ones the avg error is around 10% to 12% i think its acceptable no ? where do i get those boards he put under the joys and why when i bought the joys they didn't give them together ? just doesn't make sense to sell you hall effects without boards ...

The Disco Nation department

this is so common problem on M series MacBook's, but due to the serialization, it converts 5$ part replacement repair that can be done by anyone, to very special micro soldering and costly repair. F**** Apple

Drats, Paul... Any more videos maybe? I'm asking as a freerider, mind you. Not my fault :( Edit - thank you!

fantastic!! good to see you on again!

Next step is to serialize sensors "for security reasons".

Omnivise holder with tweezers I just picked up a couple of those holders. They are nice but the tweezer holding the component is a nice idea. Definitely going to steal that. haha thanks for sharing paul

F Apple 🍏 it had to be said. Nice job Paul

Paul S #1 <3 Paul

Hello Paul! I hope all is well 🎉

How do you fix the odometer on that cluster

Missed your videos. Waiting for more.

Dear paul, yesterday i got broken 2019 15inch MacBook pro power switch ribbon cable, while im going to swap with another keyboard housing. Yesterday i couldn’t find any video or blog regarding the mac switch repair, but im so glad today you uploaded this video 🤩🙏 Currently im using with different switch but no touch id work. I have spare switches, but the ribbon cable broken from the little glued circuit between the switch and the end of the connector. (Like you mentioned on the video) What should i do? Are there any chances to fix this? Can i swap the components of this little glued circuit with another new switch. Or should i use another glued circuit(cut the ribbon cable from center) and combine with the broken ribbon of the power buttons end. (Repair like flexgate method) Which part is the responsible for the touch id data? Is it the button or the glued little circuit? Please help me 🙏 please 😢