Відео

Fantastic video thanks

I looked at your video again again. And actually my linkage tube is not the same as yours so this is where the issue is. You have two exposed contacts on the your linkage and somehow I have only one. I guess this is the difference between left and right side and I guess I have a left linkage and pulleys set on my original part that i took apart because it was broken ! Damn !

Hi my pulleys on the motor are not the same as yours. they are like on the left side. I am baffled but anyway I bought same set as you are showing on the video but when I put the metal tube to make the link to the motor there is not way the two pulley have any slack or pretension they are fixed locked. My original pulley show a symbol R and are original never replaced. Do you recall if the inside of the pulley that linked to the metal tube were half moon ? I am baffled. Everywhere on the internet it shows right being like what you have and what I bought but not what I had originally! Can you help me?

Perfect video! One of the best explained I've seen and ive watched plenty. Thank you. I did the job in around 3hrs and it worked first time. I would definitely have done it wrong without your help.

Ще походить

Any links for the kit?

Супер 👍🏻

Had the same issue as in video with my R6 '99 changed spark plugs, cleaned and synced my carbs, checked TPS, all good but bike was still stalling on idle last thing was changing coil packs... and it worked! after changing them the bike is running like new FYI

Make a video on how to fix the darn thing

Anyone have idea where and what to check first :( and how?

Same problem! But I think it’s timing chain because my cab was for synh! (By mechanic) so will be bad spark plugs or timing chain

hi, have you found what the problem is because the same thing is happening to me

Check engine light is on.

r6 single cylinder variant

Looser engine check is on die your engine

Quality video 🙏🏼 just fixed my drivers side door using your method, a bit fiddly! & couldn’t have done it otherwise 🍺

Bro, thanks so much for doing this!!! Helped me so much and saved me sooooo much money 🙏🏻🙏🏻🙏🏻

Die Stahlseile einfetten wäre von vorteil.

Thanks for this video I just managed to sort my sliding door after months of being broken. Also treated myself to the same 24" bolt cutter/ come crimpers 😂

Mine did exactly the same as yours this morning your video makes Me want to attempt it. Where’s the best place to get the kit ? Is it a vw main dealer part?

I had the same problem with my R6 '00 right form the first day I bought it (used of course). Eventually, I realized that one of the carburetor joints was quite loose. I tighten it up and problem was solved! So it's worth checking the carb joints too!

Hello, great, thanks for this vidéo Have à Nice Day 😉

excellent video

Great video, thanks! 👍🏼😊

Great video, managed to fix mine by following it closely. My California has small retaining clips to hold the wire ends into the door guide roller which prevents them coming out, the spring was on the outside not inside and I used a loop of thin nylon string to pull on the spring to pretension it. I also found it difficult refitting the panel with black clips like the original and so purchased some white ones that made it really easy, links below. Only had very slight noise as the cables and reels rewound initially but all quiet after about 10 opening and closing of the sliding door. I found a few more videos online that do it slightly differently so thought I'd share as different methods of preloading, hope you find them useful ... Spring on outside and hydraulic crimper (Amazon £25)... ua-cam.com/video/bdE4Vj9KAY0/v-deo.html Spring on inside, as yours ... ua-cam.com/video/qCb3NFyeDGM/v-deo.html Wire, reels and ferrule set for right side £6.99 ... www.ebay.co.uk/itm/For-VW-Transporter-Caravelle-electric-sliding-door-repair-kit-right-side-/133166994381 Hydraulic crimper £25.99 ... www.amazon.co.uk/dp/B07GNWSY1K/ref=cm_sw_r_cp_apa_glt_fabc_GF10ZR5KEWBM197P7VMG?_encoding=UTF8&psc=1 White Panel clips X10 £4.85 ... www.ebay.co.uk/itm/VW-T5-TRANSPORTER-SLIDING-DOOR-GUIDE-RAIL-COVER-TRIM-CLIPS-SIDE-7H0843514-WHITE-/401696397281

Sehr schön erklärt, das hilft mir weiter!

what mods holy shit

Do you offer this repair as a professional service?

Teşekkür ederim

Valves

One of the best how to videos I've seen. Does anyone know where the kit comes from? Is it a VW part? The electric doors were disabled years ago before I bought my T5 - they even removed some of the buttons - I'd love to reinstate the power, but the motors will need checking first.

Great Video. Where did u buy the kit from please?

What's the bolt head type on bolts holding the rail on the van? None of my spline bits fit, so I need to buy the right bit before I can get on with this. TIA

So for those encountering this issue... i have cleaned my carbs and sync them... and worked for me... bad thing about the first gen r6 you need to keep up on the carbs...

Thank you so much for posting this video, it made what seemed like a daunting repair quite straightforward. I have one tip that can help to put the two wheels together, and trying to bring the tensioning spring into line. I used a length of the old cable, created a loop, and used the loop to pull the spring round as I put the outer wheel into place.

Thanks How can I get replacement kit?

Has anyone fixed this problem yet ???????? Found a solution or anything???????

I’ve used this video to help me fix both doors on my Caravelle. The only slight change I’ve made is fit everything except the shorter cable to the door. Then use the pretension in the spring once it’s all secured in its housing to then attach to the visible door.

Great video, followed it to the letter but discovered my problem was the bolt on roller guide towards the front end. Its a crappy plastic thing compared to the rear roller. Anyone know where I can get this part by itself, looked everywhere 🙁

Why is your temp gauge saying low. I have the same problem

Your video is gold! You helped me sooooo much today, thanks a lot!

Vielen vielen Dank für das mega gute Video :) . Bei mir hat es super geklappt. Danke.

Thank you very much for video. I successfully fixed my Multivan doors :-)

Great video Ramage52, My door is making exactly the same noise so I’m going to tackle this, two questions; how do you know how long to cut the new cables (taking into account stretching etc) and did the noise go away after it settled down? Cheers!

THX mate, Got the job done today.

Ur carbs ain't synced

good man ;)

Getting the sliding door cover panel back on. I found I had to remove the fuse that powered the motor to allow me to slide the door to the position that allows the panel to slide back in. On our 2011 Caravelle it was located in the set under the passenger seat. It was one of the the large ones at the rear on the passenger side. It may take some searching of fuse layout diagrams and trial and error to find the right one on other versions!!!

Hi bro.Where can I get the replacement kit

hi the push pins that hold the panel in place are badly worn , can you tell me the correct name for them so i can order some replacements please .. the ones have a small ring of rubber on and they no longer move .. thanks