- 846
- 182 906
Knights Templar Free Roadside Assistance
Приєднався 25 гру 2023
We are a not-for-profit Christian organization that offers its services for Free we are here to help The travelers on the road, our communities, and those communities members that we serve we have been working in and around Wisconsin Dells, WI. Est. 2020 we do work off of donations and all donations go right back into Knights Templar Free Roadside Assistance to keep our trucks maintenanced and our tools maintained. We are here to assist the customer with their job by providing the customer with Tools, Knowledge and Experience. Customers are to supply all supplies and parts. Come by our Community Facebook page and check us out we have over 2,000 members many members of our Facebook page are members of the community's that we serve. We are the first and only business of our kind. We post videos when we have work which is most days.
WARNING ⚠️ WHEN YOU CALL US OUT YOU ASSUME ALL RISK IF DAMAGE IS DONE TO YOU OR YOUR VEHICLE.
WARNING ⚠️ WHEN YOU CALL US OUT YOU ASSUME ALL RISK IF DAMAGE IS DONE TO YOU OR YOUR VEHICLE.
Sanding Body Filler Part 6B: 1996 Dodge Ram 1500 Work Truck
My son accidentally kicked the cord unplugging my camera which deactivated it somehow and we had to restart the video. But that's okay accidents happen we're just going to go ahead and finish up sanding the body filler down to our liking so then tomorrow will be ready to paint.
Переглядів: 28
Відео
Sanding Body Filler Part 6A: 1996 Dodge Ram 1500 Work Truck
Переглядів 399 годин тому
Going to start sanding down the body filler that we put on this afternoon as I was doing the sanding at the end of the video my son accidentally unplugged the camera and it cut the video so we'll have to do a number two of finishing up the sanding.
Applying Body Filler Part 5: 1996 Dodge Ram 1500 Work Truck
Переглядів 1112 годин тому
Went ahead and stopped and got some body filler we're just going to put that on over the fiberglass real quick let that cure up for about 4 hours and then we'll be back to sand it all down nice and smooth.
Brake Caliper Replacement: 2007 GMC Denali
Переглядів 2013 годин тому
Got a call from a very nice young Lady asking if we could come over to Portage, WI. and change a brake caliper on the passenger front tire on her 2007 GMC Denali and also bleed the brakes.
Painting Driver's Side Fender Part 4: 1996 Dodge Ram 1500 Work Truck
Переглядів 1292 години тому
Went ahead and sanded down the driver side front fender along with the bed. We still have a lot of work to do on the bed before we can get to painting that but it is ready for paint most of it except for where we fiberglassed at. We have a little bit more prep work to do around that fiberglass and then we'll be able to paint the bed. Went ahead and sanded the driver side fender and we're going ...
Bodywork Fiberglassing Part 3: 1996 Dodge Ram 1500 Work Truck
Переглядів 292 години тому
Moving on to part 3 here we are going to start cutting the fiberglass cloth so that way we can start putting the resin on and then put the fiberglass cloth on and then resin over that again and then we'll be letting that cure for about 12 hours.
Bodywork Foam Removal Part 2: 1996 Dodge Ram 1500 Work Truck
Переглядів 352 години тому
Moving on to part 2 of the bodywork for the 1996 Dodge Ram 1500 work truck. We will be cutting off the access foam now that it has dried which will create our backing for our fiberglass sheet.
Starting Body Work Part 1: 1996 Dodge Ram 1500 Work Truck
Переглядів 1734 години тому
Just starting to do the bodywork and sanding a little bit on the 1996 Dodge Ram work truck we're going to be repainting it no we're not doing this the right way I do not care what anybody has to say I'm doing it my way and if you don't like it don't watch.
Jump-Start: 2010 Ford F-150
Переглядів 294 години тому
Got a call from a very nice gentleman asking if we could come over to the dinner and a movie stinky Pete's in Wisconsin Dells and jump start his 2010 Ford F-150 for him.
Lockout & Chewed A Guy's Ass Out: 2006 Chevy Impala
Переглядів 274 години тому
Got a call from a very nice Lady asking if we could come over and unlock her car in Wisconsin Dells, WI. While I was going through the parking lot I stopped some friends of mine that happened to know this Lady and I was going to ask where her car was located and they informed me that the guy in the wheelchair is the guy that is going around telling people "If you don't donate to Knights Templar...
Why I Put A Vise On My Truck
Переглядів 2427 годин тому
People keep asking me around town why do you have a vise on the front of your truck well here's the reason. Got a lug nut cap stuck in my socket so I'm going to use the vice on the front of my truck to hold the socket so that way I can pound the lug nut cap out and many other reasons as well.
Tire Repair: 2006 Pontiac G6
Переглядів 527 годин тому
Got a message from a very nice Lady on our Facebook Chat Page. She's asking if we could come over to Baraboo, WI. check all four of her tires and see why one of her tires is losing air while I was checking her tires I looked at the one and it had an nail in it making it have a slow leak so we're going to pull it off the rim and Patch it for real quick.
Balancing 2 Tires: 2007 Saturn Outlook
Переглядів 219 годин тому
Just balancing up the two tires for the 2007 Saturn Outlook.
2 Tire Replacement: 2007 Saturn Outlook
Переглядів 1029 годин тому
Got a call from a very nice Gentleman asking if we could come over to the Ho-Chunk Reservation and change two tires on his 2007 Saturn Outlook.
Lockout: 1997 Chevy Express Conversion Van
Переглядів 2812 годин тому
Lockout: 1997 Chevy Express Conversion Van
Vice Install: 2001 Dodge Ram 1500 Work Truck
Переглядів 7312 годин тому
Vice Install: 2001 Dodge Ram 1500 Work Truck
2 Tire Replacement: 1986 Volkswagen Rabbit Convertible
Переглядів 4412 годин тому
2 Tire Replacement: 1986 Volkswagen Rabbit Convertible
Balancing 4 Tires: 2016 Ford Taurus SHO
Переглядів 3014 годин тому
Balancing 4 Tires: 2016 Ford Taurus SHO
4 Tire Replacement: 2016 Ford Taurus SHO
Переглядів 5014 годин тому
4 Tire Replacement: 2016 Ford Taurus SHO
Tire Mount & Balance: 2018 Jeep Cherokee
Переглядів 1214 годин тому
Tire Mount & Balance: 2018 Jeep Cherokee
Rear Brake Pad & Rotor Replacement Part 3: 2006 Infiniti FX35
Переглядів 1921 годину тому
Rear Brake Pad & Rotor Replacement Part 3: 2006 Infiniti FX35
Rear Brake Pad & Rotor Replacement Part 2: 2006 Infiniti FX35
Переглядів 10День тому
Rear Brake Pad & Rotor Replacement Part 2: 2006 Infiniti FX35
Front Brake Pads Replacement Part 1: 2006 Infiniti FX35
Переглядів 46День тому
Front Brake Pads Replacement Part 1: 2006 Infiniti FX35
Brake Pad Replacement Rears Only: 2015 Dodge Grand Caravan
Переглядів 63День тому
Brake Pad Replacement Rears Only: 2015 Dodge Grand Caravan
Battery Replacement Install: 2005 Buick LeSabre (Part 3)
Переглядів 25День тому
Battery Replacement Install: 2005 Buick LeSabre (Part 3)
Don't let the haters discourage you. There day will come. If the people want to help let them donate.
👍
Maybe you need a decent bumper first!
You could always donate us one. It's the stock bumper I've had a few things mounted on this Mount that's mounted to the bumper does just fine has for years but yeah I am going to upgrade to a bigger nicer bumper that I'll be able to use as like a workbench as well when we move everything over to our 3500 Dodge Ram once we get it fixed up and running properly.
But why not mount it to a hitch that you can remove when not in use?
Good question I will use this on the daily though. So this Mount that I have on the bumper is actually for a ATV/UTV wench that I had on the truck. I took that off and put an air compressor on the wench mount which is what is mounted to the front of my bumper on the truck that eventually gave out after about 5 years. And since I already had this mount on the front of my truck I figured why not use it for a vice instead of buying another hitch receiver with the same kind of Mount already on it for that. I had thought of that too and was thinking was the least cost-effective way without spending money and this was it. here's a link to one of my UA-cam videos of me removing the air compressor and installing the vise. ua-cam.com/video/YUIVS0CFPLk/v-deo.htmlsi=JioCo-A7QYM3Cj6C
Alex jones ?
What does Alex Jones have to do with anything?
@@KnightsTemplarFree your voice 😂
@@trololo4217 oh 😂
The vise isn't just for that it's for other things too like getting stuck caliper pins out of the bracket duh use your imagination you can use a vice for all kinds of things. I was just using it as a example.
you don’t need a knife for those amazon bags they just rip right open at top
🤔 I didn't know that lol.
Terrific! 😊 Thanks for sharing your unboxing videos with us. Stay safe and I will be looking for your next video. 😀
👍
may i ask what you have holding the engine up while the motor mount is released
A 3-ton floor jack with a 2x6 board on top of it to distribute the weight across the whole bottom of the oil pan of the motor. When you do it this way it keeps the oil pan from crushing in allows you to move the motor up and down as needed.
At least it's not raining....lol. You really got soaked. I know it wasn't easy doing them in the rain. Slippery and all. Stay save will see you soon. Much love to you and your family.😊
True 😊
@@KnightsTemplarFree ❤
That young man did a great job. 😊
Yes he did and now he'll know how to put a tire on forever or at least he'll have a good experience to tell his buddies.
@@KnightsTemplarFree ❤
I am so happy you were able to get a battery and the main parts for his car. Derrick you always go above and beyond for people in need. You have a big caring heart. I love that about you. I hope he catches these bad people and serve justice. Great work does not go unnoticed.🙂
Thank you it's very much appreciated to hear your kind words.
That was a good try with the generator and charger.
I figured it was worth a shot.
Wow! They did do a job on the car. I know you can fix the car. I think he needs a partner for back up.
That's what I said but I guess most private investigators work by themselves.
GOD BLESS YOU GUYS!!!!!!!
Thank you God Bless you as well 🙏
Sometimes when I turn my van on the dashboard lights turn on and the wipers start wiping. The lights also flicker. This happens once in awhile. Most time my van starts fine but the headlights do flicker but not stay on. Last week for about a week they were turning on fine but they went out again and so the flicker thing. Is it a bad alternator or bad wiring
That's a hard one to say if is or not could be a couple things you I would run it into O'Reilly's where they can do a battery test and an alternator test but also they can run a diagnostic test through your OBD port for free and they can tell you what it is. Without me being there I wouldn't be able to say exactly what it is cuz I would have to run a couple of tests myself.
Should have had, little man watch what was going on. 😮 Lerns him somethin, 🫡
I like what you're saying but I didn't do that because the vehicles were going by at 70+ mph they don't move over and it becomes very dangerous for more than one person to be there that's why I asked them to stay back.
@@KnightsTemplarFree 🫡
Very dangerous out there was scary when I was a teen ending up there a few times I don’t wish it on no one and I try to help ppl if I can when I can
I'm sorry to complain but you can't see exactly where your hands are and what you're loosening. I suggest to have the hood open and a camera pointing down so At least we can see what you're doing and in which order. Thank you.
This is not a how-to video there's videos out there for that this just shows how fast we do the job.
When you were repairing that tire, I was saying what about drilling the peace of wood out, two for one the hole needs to be drilled any way. Surprise it's a different patch. Okay you got me on this one. 🤣🤣🤣🤣
Lol had to use a different patch because of the way that the whole was angled.
Kinda sounds like a huge pain to do, got a 2018 kia that needs a new alternator
Actually all in all changing the alternator on this Kia was not to bad. If you watch the install video you'll notice that I installed the alternator 5 minutes faster than when I took it out.
Thank you again so much for all the help yesterday. God bless you and your cause
You're very welcome it was our pleasure.
If I had a R, V. I would come camp up there. Looks like a nice place.
It's a very nice place.
Cual es producto que usaste para el aro
If you're talking about the black product I used it's called bead seal we use it here in Wisconsin because we live in cold climate it keeps the air from leaking around the edge of the rim during the cold winter months I just get so used to doing on the vehicles from Wisconsin's rims that I just do it to everybody's vehicle this vehicle happened to be from Mississippi and they don't need seal down there because there's no need for it because it doesn't get cold enough down there to make the tires leak without it we also use it to seal up valve stems as well.
Tremendo trabajo hermano
Gracias.
I do this all the time. I use a 2000 watt inverter and hook it straight to truck battery. Works great.
I do have an inverter for my truck but the problem is is that it's too powerful for my truck I would need a secondary battery and a secondary alternator to run it. So as soon as I get the chance and I can get over to the semi truck salvage yard I'm going to grab an air compressor off of the semi truck to hook onto my engine and then just mount a tank in the spot where I have this air compressor hooked up at on my truck. Should work great I just want to upgrade to something better than what I've had in the past.
@@KnightsTemplarFree for some reason i got lucky the compresor i have is a 120 volt 1 gallon. The inverter i have is a 2000 watt. It is a cheap amazon inverter. My Ford Ranger has one large battery that is plenty as long as the engine is running. Inflated 8 tires at 95 psi all at once with no issues. I know you will get it as you always do good work on your videos. Thanks again for the video content.
@@garyday6681 you're very welcome thank you for the vote of confidence and for also watching our videos it's much appreciated we will get it all lined out I've been using the little air compressor with the 1 gal tank on it it's worked great I just have to figure out a way to power it better or put put my generator in my truck until I can get the upgraded semi truck air compressor to hook to the motor. today what I did was I just met people at certain gas stations or certain businesses where I can use an outside plug it's been working great and for right now if I run into a problem where a person is on the interstate we'll just put their spare on and if their spare is bad and we need to get a new tire well we'll have to come to town anyways to get them a new tire and then we'll just take their rim with us and pop the tire on the rim we'll just run over to gas station where I can use an outside plug and I'll just do it that way for right now it'll probably only be a couple weeks but it'll be fine and we'll make do.
Are you on TikTok? You might gain a nice following there. 👍
Yes we are on TikTok we have about 815 members we are on all social medias even Reddit & Google we have over 2,400 members on our Facebook page most everything gets posted on our Facebook page UA-cam, TikTok, Instagram, Reddit and other social medias we don't get to post as much on there as we do on Facebook Facebook is a more of a behind the scenes look into our business come by and check it out here's a link thank you. facebook.com/share/g/NKwgESHZ7fjYvTXJ/?mibextid=A7sQZp
@@KnightsTemplarFree Awesome TikTok is big right now.
@@kimborampage yeah it is. we've been gaining some followers on Tik Tok daily.
Jesus brother, so selfless. I hope y’all get the funding you deserve to make this a more widespread effort
I have faith brother we will get there. Takes time hard work dedication and is not going to happen overnight but you keep watching and we'll keep doing what we do helping the people in The travelers and hopefully one of these days will be able to service your area too and maybe even the world or I'll die tryin.
Nice
Thank you I have faith in everyone that they can do this. 👍
You’ll probably have water sloshing around in your tire now.
Not probably, he will
@@Monriahboth of you have no idea what you're talking about go hang around the tire shop and see how it's done you can use soap and water or paste been doing this job 20+ years never have gotten water in a tire. This is how it's always been done. You're not spraying enough water on it to get water in the tire you're just misting it on the edge of the bead that's it no water gets in the tire go back to school and learn something.
Ive been a forrest ranger for 37 years, everytime I work on a dune buggy I always make sure to add water to my tires it acts like a counterweight to keep your alignment in check. You have no idea what youre talking about let the experts work.
For off-road use yes you can technically fill your tires completely up with water for off-road and industrial usage out on the trails we've done this many times with off road Buggies, UTVs and ATVs to add weight so they'll grab traction. But when you do that with your tires you don't want to run them on the road. Thank you Sir for sharing have a wonderful day.
@@looselugnuts5874 yes but not great for pavement princesses
Nice thanks for sharing
Thanks for watching.
Como puede sobrevivir con los gastos de equipo de trabajo gasolina mantenimiento de los vehículos seguros
Donations. I invite you to come and check out our Facebook page where everything and anything that you'd like to know about our Business, Order, & Organization is posted we also on that page have over 2,000 members most of those members being people in our community. Also on our Facebook page we have a community chat room where you can talk with the people here's a link. Our Facebook page is a more behind the scenes and gives you a better look into our Organization and allows you to talk with the people and get to make up your own mind about us. facebook.com/share/g/fdCFEr913J9wmDGk/?mibextid=A7sQZp
Bro! Shoot me a message por favor. I love this!
Come by and check us out on our Facebook page. Where we have over 2,000 members and you can talk with the local people in our community that we serve. Also if you're looking to join our Knights Templar Organization you can find out how to join our Order there. facebook.com/share/g/fdCFEr913J9wmDGk/?mibextid=A7sQZp
God bless you
Awesome!!!
Thank you for sending us the five gallon water jug holder much appreciated.
15 Boring ass minutes.
I know I had to live through it in the moment at least you could have fast forwarded over. 😂
It's alright we all do it. We are human, don't beat yourself up over it.... From your #1 fan 😊
Thank you it is a little bit of a bummer and kind of a setback but that's okay we'll overcome it and move forward.
what size is the socket key
It didn't have locking lug nuts so no lug key but the socket I used for this I believe was a 3/4.
Awesome video. Thanks.
Glad you liked it.
This was helpful thanks°
You're very welcome.
What a great donation! This will broaden your services I think and open up more opportunities for Knight Templer F.R.S.A
I think it will too but it's Knights Templar F.R.A you added an S in there 😂
@@KnightsTemplarFree oh sorry about that 😀
Me is first
What? Oh 😂😂😂
No respect from others here
Nope none at all like I say in the video it is the law to move over it even says on the back windshield of my truck move over it's the law they don't care.
He missed the ramp
Yeah I wasn't sure if he missed the ramp or if he wanted to drive down to the next ramp so that way we weren't driving all the way through the town of Baraboo, WI. from the west side all the way to the east side to get to that garage.
Could of at least shown some of what your doing past the tools
There was barely enough room to even get your hand down in there so not enough room to get the camera down there too.
Thank you for showing this! excided for you. Stay Safe.....🛻
Thank you 🙏.
And I thought I couldn't do a summer salt. Can't wait to see this all finished.
I can't wait to get it all finished so we can use it.
Thank you so much for the shout out love the video my brother keep up the good work. Never give up. Have a blessed night.
Thank you. You too.
good work
Thank you 🙏.
Looks doesn't make the truck run most important is the motor and transmission are in good shape.
Very very true.
That is awesome! 😄
Thank you.
I think you should put a coiler on the truck for your air compressor hose. Question: Why would you be hauling a motorcycle on the truck? I would think about coating the floor with a non-slip paint or something to have traction when walking on it.
Because there's nobody around here that can tow motorcycles and I'm an avid motorcycle list so I would personally I would personally want my bike to be able to be towed properly by a proper truck not just being loaded up on a flatbed and chain down or being held up by the wheel lift of a boom truck those types of ways of Towing motorcycles usually result in some kind of damage being done to the motorcycle. And putting the coiler on it that's the plan for the air hose.
It's so frustrating when you don't have the right parts. I think they give you different sizes on the parts these days because there are too many different cars that has different sizes. who knows what size clips is on there. Until you have it all apart. Love your videos. Keep on trucking! 😀 Be safe!
That's true and it is thanks 👍.
Do you still have to start your truck when you use them?
Good question the answer is yes.