Відео

Just saved me a lot more time and money.

You're a genius. When I went to look for possible problem I was happy to find that mine was indeed loose! I have tightened and hope not hear anymore ghost flushes. FYI. If yours is a solid green top it will still unscrew like the one that seems to be everywhere on UA-cam.

Holy crap a few days of replacing my flapper from the base model due to a crack i saw that my toilet was STILL leaking and i swapped the flapper with one like this and it was still draining. Just took it off and saw it wasnt tightened. Lets hope this was just the problem.

Hey I’m just starting out in Ontario Canada, where about is this

ua-cam.com/video/IT2ib1p2Ves/v-deo.html

Help! My son has a 4425A American Standard.toilet in a 2nd floor bathroom. There is no ghost flushing and the water in the tank is at the correct level. But the water in the bowl gets lower till its nearly empty. No odor, water around the base or loose bolts on the base. What is going on? Anybody have an idea? Thanks

Can’t like this enough. That was the problem. Never would have known without this video.

Each night as I read to my boys at bedtime I heard my new American Standard Champion (4215A) start to refill every 5 minutes. I was so annoyed at this. I followed all of the manufacturer's instructions for installation, but this new toilet was leaking. I tried this fix and it worked immediately. Thank you so much. I am sure I would have never found this as you cannot see it unless you really get in there.

A.S. still can't get it right after a hundred years

Thank you!

I have a Champion toilet. It's a piece of crap. I have to replace the gasket constantly, and even then it sometimes still leaks.

ua-cam.com/video/ZkrCp07CEq4/v-deo.html. The only real cure

How do you get the green cap off that's in your hand. I tried everything to get it off. Thank you in advance

We have had issues off and on with leaking in new our AS toilet since we installed it. We were to the point of either replacing the tank or the entire toilet. So glad we stumbled across this video today! It is EXACTLY what we found and tightening it solved the problem! No more leaking! You are amazing! Thank you for posting this solution!

it worked - Thanks!!!

Thanks! Worked great. No leak. Really appreciate the advice.

Worked perfectly. Just got two of these toilets installed over the summer and started hearing the leak yesterday. Thanks!!!

easy fix!! WHOOP Thanks for sharing

Spot on, spot on! Thanks. But perhaps a video showing (even though it does spin off) how to get the damn thing out of the toilet. Particularly with human hands. Holy crap, was sure I was going to snap off something. By the way, my ring fell right off and down into hole perfectly so I couldn't even see the ring. I thought the "lock barbs" on the top piece were what was supposed to hold the seal on until I saw your video. Thanks again.

I don't have that grey piece between the seal and the green top. Mine has notches which I lined up with the "cup" below, but still water is leaking into the bowl (did a dye test). Do I need to replace the entire valve assembly? Toilet is 5 yrs old and this is the first time it's leaking water. I changed the seal already with an American Standard seal & new O-ring.

I believe your video fixed my problem with my Toilet. I too, like others, am pretty savy with DIY projects but don't think I would have figured this out. Well done sir! Thank you.

I grew up working in my dad's plumbing supply shop, so I am pretty savvy on how to fix plumbing related issues. I would have NEVER figured this out on my own... Thank you for sharing!

Your the man! Thank you

To get off the solid green top, turn it, and keep turning it until is unscrews from the stem. When fixed then just screw it back on. I had to hold the stem in place while I unscrewed the green top with my hand. My seal has a bump in it. Not sure if that is normal or is causing the problem. I will head to HD to look for a new seal.

Thank you...more then you know. I found I could squeeze and "click" and it would be fixed for a few flushes and back to seeping. I will tighten and hope my fixes become more permanent

What a pain it was to to take the flapper off, but it worked. It was driving me crazy trying adjustments! Thanks so much.👍

epic thanks....

Thank you! I have a relatively new American Standard toilet that was dribbling from the tank into the bowl. I thought I'd need a whole new flapper assembly, but this solved my problem. Saved me $30 and a few hours of work!

I spent over an hour trying to figure out why my American Standard (2021) was ghost flushing until finally I stumbled upon your video. I tightened up the gray mechanism as you suggested and it worked like a charm. Thank you!

This video saved me. Has been leaking for over a month … double water bill $$$ this stopped the leaking cold

Thank you for sharing. Much appreciated.

Great video! Wish I saw this before 😂. I had a new toilet installed and it was leaking constantly. Lift on flapper, hold the black rod underneath while you turn your flapper according to what’s written on it, part comes off. The plastic part that holds the white seal wasn’t all the way on, once put back in place? Fixed the running water.

Did work for me. constantly inspecting and tightening since i have to replace the faulty silicone gasket. Neither the OEM (3 months) or aftermarket (6 months) last.

American Standard keeps making parts for its toilets that are not fit for the purpose they are manufactured for. In my opinion this is to generate sales of replacement parts down the road. Very unethical. I won’t ever by another American Standard toilet😡

Just installed 3 of these toilets. One is leaking. I have the solid green with out the black cap. How the heck do you take it off? I’ve tried turning it but it feels like it’s going to twist & brake. Can’t find any other videos with this cap with out the black screw top. TIA

This tip totally worked. Thanks

What if the grey ring won't tighten? I think this is my problem but it moves around no matter what I do. Any other suggestions? The seal also doesn't sit under this grey ring which it looks like it should?

Omg yes!!! Finally found one to cover this!! thank you!

Just installed a brand new American Standard toilet. I notice a leak coming from the water inlet at the bottom of the tank. The problem was the styrofoam inside the tank was under the red rubber washer and was not making a good seal, so I had to cut some of the styofoam away from the hole where the water comes in. I also had to buy a new rubber washer, because the original one was distorted. This part of the toilet was assemble at the factory. Poor quality control from the factory.

My brand new American Standard toilet was constantly leaking and refilling. I tried multiple things to try and fix it. Apparently after 2020, American Standard switched the flapper valve to this setup. When I removed the flapper, it was loose at the tabs as you said. All it needed was to be tightened and it was good to go. The extra play in the valve cover was the problem! Thanks for posting this it was very helpful!

I just want to say thanks for sharing, I had the exact problem.

Thank you! I had replaced the gaskets twice then the whole assembly once. Still leaking. Just went and checked the flapper and it was indeed loose! Tightened that sucker up and so far so good.

Thanks

You have any idea how hard this info was to find?!? You are the only UA-cam or Google search that helps us people WITHOUT the black thumb screw where the flush chain connects.

Is there a video showing how to replace the seal?

Here is what they don't tell you. How to change the flapper valve without taking the tank off.

I have this same exact type of flapper and I want to replace the seal. I am having difficulty getting the flapper out because it is attached to a stem. Any words of wisdom for me? My other toilet has a screw cap to remove the flapper but this one is a solid piece. I was able to turn it a slight bit and remove the bottom piece but the stem won't allow me to remove the top green piece to replace the seal.

Still can’t get it to open

THANK YOU SO MUCH!!!!! MY MOM'S WATER BILL HAS BEEN $100 HIGHER SINCE GETTING THAT TOILET!!!!!! I just tried this and the water level has not gone back down in the last 10 minutes. The toilet was coming in every 20 minutes to fill back up. Thank you so much.

Happened to me. After flushing i could see the flapper was askew. I did not disasemble anything. I held the green part in my left hand, with my right held i grabbed the grey ring on the bottom. Then i pushed them together and twisted it until i felt both parts were snug and the flapper was secured in between.