- 226
- 237 159
Atlas Van Tech
United Kingdom
Приєднався 22 лип 2019
We have over 20 years experience in providing essential van equipment to both fleet and retail customers. We are proud to have a client base that includes Public Utilities, Local Authorities, NHS, Major Dealer networks and many local fleet users and trade people across Scotland. Our team can handle both multi fleet and single van conversions. Every project, large or small is installed in accordance to strict BSI ISO 9001 2008 quality management systems. This standard assures that every customer receives a consistent quality installation on time, every time
Instillation of Five Bar Roof Rack and Roller, along with a Rear Door Access Ladder for Radbury
This short video showcases a simple but essential job for Radbury of Ayr! We installed a Five Bar Roof Rack and Roller, along with a Rear Door Access Ladder to make transporting gear easier than ever.
Practical solutions for smooth and efficient work on the go! If you have a vehicle or fleet of vehicles that would benefit from our services, then get in touch with our expert team.
Find out more at www.atlasvantech.co.uk/
📞 01292 474746
📧 info@atlasvantech.co.uk
Practical solutions for smooth and efficient work on the go! If you have a vehicle or fleet of vehicles that would benefit from our services, then get in touch with our expert team.
Find out more at www.atlasvantech.co.uk/
📞 01292 474746
📧 info@atlasvantech.co.uk
Переглядів: 21
Відео
Recently installed sleek and durable Three Bar Roof Rack and Roller for QMech
Переглядів 52День тому
Recently completed for QMech! We recently installed a sleek and durable Three Bar Roof Rack and Roller, perfect for their heavy-duty needs. To top it off, we applied custom graphics produced by our talented in-house graphics team, giving their vehicle a standout look on the road. If you have a vehicle or fleet of vehicles that would benefit from our services, then get in touch with our expert t...
Installation of 2 custom plywood shelving units and vehicle graphics for DC Prep and Paint
Переглядів 8814 днів тому
This short video showcases a recently completed installation for DC Prep and Paint! We installed two custom plywood shelving units-one nearside and one offside-but not before fitting one of our signature Precision Plywood Linings for that perfect fit and finish. Further to this our talented in-house graphics team designed and applied some eye-catching, custom graphics that bring the whole proje...
Toyota Proace Van Upgrades for the Scottish SPCA
Переглядів 41Місяць тому
Another successful van conversion for the Scottish SPCA in our long-standing partnership of over 15 years. These three Toyota Proace vans are some of twenty new frontline Scottish SPCA vans that are ready to go into service. Our conversion included fitting acrylic linings, poly laminate floors, beacons, vents, dog boxes, animal first aid kits and a safety mid-way bulkhead with a combined shelf ...
Upgraded Vauxhall Movano L3H2 for George Murphy & Son - van supplied by Kerr and Smith, Cumnock.
Переглядів 46Місяць тому
Recently this Vauxhall Movano L3H2 was completed for George Murphy & Son, with van supplied by Kerr and Smith, Cumnock. We installed a precision cut CNC lining as the base for maximum protection. Further to this we interpreted and redesigned the timber structures in their old van and created a professional installation exactly to their requirements. The new structures were created with box and ...
Three Upgraded Transit Tippers for South Ayrshire Council, Parks and Grounds Department
Переглядів 1,7 тис.Місяць тому
These are three Transit Tippers for South Ayrshire Council, Parks and Grounds Department. After tipper conversions were completed, we fitted Reg' 65 road side compliant beacons and towbars with ball and pin hitches. Three more vehicles ready to go into service across South Ayrshire. If you have a vehicle or fleet of vehicles that would benefit from our services, then get in touch with our exper...
Upgraded Van for Kerr Compressors - Mercedes Benz Sprinter
Переглядів 672 місяці тому
We're thrilled to showcase our latest upgrade for Kerr Compressors-a Mercedes Benz Sprinter, now part of their fleet, reflecting our unwavering commitment to meeting our clients' needs. This upgrade was an interior and exterior transformation with the instillation of vehicle graphics (created and installed by our inhouse team), precision CNC cut plywood lining, a combined shelving and drawer un...
Recently completed Volkswagen Crafter for NHS Ayrshire and Arran
Переглядів 252 місяці тому
We are proud to share our recently completed Volkswagen Crafter, demonstrating our ongoing commitment to providing quality solutions to NHS Ayrshire and Arran. This specialised van features two hygienic compartments-one for clinical waste and another for clean linen. Our tough poly laminate finish ensures that both areas can be effectively disinfected and deep cleaned, maintaining the highest s...
Upgrading Vauxhall, fleet for Forestry and Land Scotland, supplied by Kerr and Smith, Cumnock.
Переглядів 1133 місяці тому
We are proud to be involved in the preparation of the Vauxhall, vehicle fleet for Forestry and Land Scotland, supplied by Kerr and Smith, Cumnock. This van is finished in Fully Seam Welded White PVC, ensuring impervious and leak-free joints. The entire rear compartment, including a Seam Welded Ceiling and Stainless-Steel Mesh Shelf, is fully washable for easy cleaning. Up front, we’ve integrate...
Converting a Renault Master L3H2 for CLP Fleet Services, supplied by Parks Fleet, East Kilbride.
Переглядів 1373 місяці тому
This short video showcases our recent conversion of a Renault Master L3H2 for CLP Fleet Services, Airdrie, Supplied by Parks Fleet, East Kilbride. We installed an offside Shelving Unit complete with Shelves, Storage Boxes, Floor Locker, Drawers and Power tool Case Clamp. On the nearside there's a Workbench with a Vice, Floor Locker, System Cases and drawers for delicate component storage. On th...
Upgraded Toyota Proace Van, for NHS Highland, Hotel Services, supplied by Parks Fleet East Kilbride.
Переглядів 993 місяці тому
Recently we upgraded this Toyota Proace Van, destined for NHS Highland, Hotel Services, supplied by Parks Fleet East Kilbride. We've installed our top-of-the-line easy clean Polylaminate Lining, ensuring a hygienic storage environment that protects against contamination and spillages. Ready to support our healthcare heroes with the best equipment possible! If you have a vehicle or fleet of vehi...
Preparing a New Fleet of Vehicles Supplied by Kerr and Smith, Cumnock, for Springfield Homes
Переглядів 263 місяці тому
Recently we have been preparing a new fleet of vehicles supplied by Kerr and Smith, Cumnock, for Springfield Homes. Our team is hard at work ensuring these vehicles are equipped with: 🔹 𝗣𝗹𝘆𝘄𝗼𝗼𝗱 𝗟𝗶𝗻𝗶𝗻𝗴 for enhanced durability 🔹 𝗦𝗶𝗴𝗻𝘄𝗿𝗶𝘁𝗶𝗻𝗴 by our in-house Graphics Department for a professional look 🔹 𝗦𝗲𝗰𝘂𝗿𝗶𝘁𝘆 𝗟𝗼𝗰𝗸𝘀 to protect valuable tools against theft If you have a vehicle or fleet of vehicle...
TRS Refrigeration Van upgrades including Hook Security Locks
Переглядів 7544 місяці тому
We're thrilled to be prepping these vans for Parks Fleet, East Kilbride, on behalf of their customer TRS Refrigeration. 🛠️ Security is the top priority, so we've installed Hook Security Locks on the sideload and rear doors. 🔒 But that's not all! These vans also feature: 🔹 Sign Writing 🔹 Plywood Linings 🔹 Plywood Shelving 🔹 Ventilation If you have a vehicle or fleet of vehicles that would benefi...
Atlas Van Tech Renault Master L3H2 van now fully equipped for dealer installation work
Переглядів 2164 місяці тому
Introducing the newest addition to our outside installation fleet! Check out our Renault Master L3H2 van, now fully equipped for dealer installation work. Our in-house graphics team did a fantastic job with the signage, and we've installed a 1000w inverter, an offside Timber Rack, a nearside Shelving and Bench unit, and several internal LED lights for optimal illumination. This upgrade showcase...
Installation of Plywood Shelving Unit in Vauxhall Vivaro LWB for Cats Protection
Переглядів 1055 місяців тому
This short video showcases a recently completed a Vauxhall Vivaro LWB makeover for Cats Protection at their Girvan Branch. We've installed a Plywood Shelving Unit to keep all their equipment purr-fectly organised for the care and re-homing of our furry friends in Ayrshire. We're paws-itively thrilled to be partnering with this wonderful charity and wish the volunteers the very best in these dif...
Instillation of Precision CNC Cut Plywood Lining to Ford Transit Custom Limited L1H1
Переглядів 4155 місяців тому
Instillation of Precision CNC Cut Plywood Lining to Ford Transit Custom Limited L1H1
Upgrades to three Vauxhall Vivaro LWB vans for The Springfield Group.
Переглядів 756 місяців тому
Upgrades to three Vauxhall Vivaro LWB vans for The Springfield Group.
Upgraded Renault Trafic L1H1 vans for returning customer Dalcon Civil Engineering
Переглядів 806 місяців тому
Upgraded Renault Trafic L1H1 vans for returning customer Dalcon Civil Engineering
Vehicle graphics creation and instillation and more on Citroen Relay L2H2 for Timberwise.
Переглядів 626 місяців тому
Vehicle graphics creation and instillation and more on Citroen Relay L2H2 for Timberwise.
Installation of Three Bar Roof Racks and Rollers, Towbars and 13 Pin Electrics and more...
Переглядів 1706 місяців тому
Installation of Three Bar Roof Racks and Rollers, Towbars and 13 Pin Electrics and more...
‘Ground up Conversion’ for long-term returning customer Dustacco Engineering
Переглядів 4026 місяців тому
‘Ground up Conversion’ for long-term returning customer Dustacco Engineering
Fitting Precision Lining, with Slip Resistant HexaDec Floor, and more for South Ayrshire Council.
Переглядів 4406 місяців тому
Fitting Precision Lining, with Slip Resistant HexaDec Floor, and more for South Ayrshire Council.
Mercedes-Benz MWB van upgrades for returning customer The Mellex Group
Переглядів 2416 місяців тому
Mercedes-Benz MWB van upgrades for returning customer The Mellex Group
Instillation of 4 bar roof rack and roller on Nissan Primastar L2 for William Duncan Roofing
Переглядів 134Рік тому
Instillation of 4 bar roof rack and roller on Nissan Primastar L2 for William Duncan Roofing
Converting a Renault Trafic V2 Van into a Crewcab
Переглядів 162Рік тому
Converting a Renault Trafic V2 Van into a Crewcab
Upgrades on Certas Energy Ford Connect Vans with Legend floors, Slam security lock and more…
Переглядів 73Рік тому
Upgrades on Certas Energy Ford Connect Vans with Legend floors, Slam security lock and more…
Installation of Strap System Glazing Rack on this Peugeot Boxer L3H2 Van for SRJ Windows
Переглядів 70Рік тому
Installation of Strap System Glazing Rack on this Peugeot Boxer L3H2 Van for SRJ Windows
Upgrades on Vauxhall Movano L3H2 Crewvan with Installation of Shelving, Container and Drawer Units
Переглядів 60Рік тому
Upgrades on Vauxhall Movano L3H2 Crewvan with Installation of Shelving, Container and Drawer Units
Upgrades on Renault Trafic L1 vans with half wrap signwriting application, plywood linings, and more
Переглядів 151Рік тому
Upgrades on Renault Trafic L1 vans with half wrap signwriting application, plywood linings, and more
Scottish SPCA vans being loaded onto transporter
Переглядів 74Рік тому
Scottish SPCA vans being loaded onto transporter
Though I don't run an AMC twin I've so enjoyed this part - I'll head back to part one now to enjoy the complete build. Superbly explained and filmed. And I have subscribed 👍👍
I'm glad you got something from them. Many thanks. Malcolm.
That was helpful not 😂😂
Thank you so much for this video. Super helpful and well-presented. Your time and effort is most appreciated!
Hi do you sell these ply kits for vivaro swb twin door please
I think it is great that you explained the booboo, although very understandable (stuff happens). I think this is definitely a case for making a 2d hardboard template of the pannier envelope, to which the hardware can be fitted temporarily to test the dynamics of fitting/unshipping etc. I do not quite understand however why the panniers could not have been fitted with the topbox removed (with your original hole positions) for then fitting the top box after would have ensured a security feature (ie they could then not be opportunistically stolen from the motorcycle. I don't think you said what capacity these panniers were. Kind regards.
Hi! Is it that top box aluminium? lightweight?or is kind of heavy, other metal? I dindt find that info in the webpage. :S
Great video - did you have a frame underneath the original flooring or did you just screw those 3 pillars directly into the metal? Thank you 🙏🏼
Working on the exact same G12 Pistons and facing the same issue where rings are not available at +040" can you advise what rings did you used for this modification?
'promosm'
Got my snowdon to day fitted to 1970 yamaha yas1 i used craven back in the early 70s on same model and and top box side cases on 72 bsa a65l great quality great video
Great stuff. I’ve got a 1958 Matchless G9 with what I believe to be an original Craven D-rack (it’s had a few coats of black paint over the years from previous owners!) so I’m just about to buy & fit a small Snowden top box.
Nice
Such a good job, thanks for sharing
The rubber “bobbins” are rocking because you’ve left off the inside bobbin fastener which stabilizes the bobbin and keeps it in place when putting the panniers on and off.
Thank you for your comment. However, you've lost me on this one because I'm not aware of any "inside bobbin fasteners". There certainly wasn't any other components in the kit when it arrived. The instructions were quite sketchy so I used my initiative. I can see how an inside saddle would help. The panniers seem to be quite stable as they are though!
Had the AJS model 20 ,very similar ,done many miles on it really reliable bike.Only prob which I could never fix was oil leak from where dynamo joins the crank case.
I can't thank you enough for making these. My dad had one of their L racks on his 900GTS Ducati - and I at one time had a set of Comets with that same topbox - but all in white - sold them to a fellow in CA with a Vincent (regrets). Anyway - I've got a wideline Triton in the works that'll likely get Cravens and I was thinking just those same cases (thrilled to see them in video - just what I hoped they'd be) and I think they recommend the same rack so I'll be studying/watching these more later. I also have a 2014 Guzzi V7 Racer which I want to set up more like dad's GTS - bench seat, low slung silencers, figure out how to mount a L rack on there (the shocks have reservoirs which are in the way - but they're really good shocks) - there's a frame mount under the pillion end that I think I can tap into and maybe some bent brackets to the shocks. Maybe a W rack would be better. There's a bit of work to do before I can really figure the Cravens for that but its the end goal. Anyway - sorry to talk your ear off. Thanks for these. Lovely machine, never had the pleasure of owning or riding a Matchless, just Nortons, Triumphs, and Enfields for the Brit bikes (not complaining - just always thought a G80 would be sweet).
I'm really glad you found the videos of help Mr. Triumph T140. There's really nothing else for it sometimes, you've just gotta get in there and design and fabricate the bracketry to suit the bike. Craven, to their credit, admit that their bracketry on some bikes is pretty non existent. If you follow my process you should be able to get a good rigid fixing using the materials I've used. You don't need a milling machine just a pedestal drill and a good round file to elongate the holes. A decent vice to fashion the bends is a great help too. I wish you the best of luck in getting everything fitted. Best regards and safe biking! Malcolm.
@@atlasvantech Hi ,,I watched your series of Vid about fitting the Craven pannier with interest.. I really like the Craven pannier style... But I need the panniers fitted to be really secure,,, no flexing ,,I also would have them placed further forward... Honestly your vids have made me think twice about Cravens,, I do not really fancy making a frame (it would be a bodge) and getting a welder to do it would not come cheap ..its a pity because I like to buy British ,, regards
Just watched this again what fantastic roads and countryside the sound of this bike is awesome don't understand why these bikes weren't as popular as the other makes. to me they are just as good great video 👍
Thanks again, Mick. I appreciate your comments👍
NICE riding Sir...but do take it a little easy...was on the edge of my seat !!
I will, but it looks faster than it is! Many thanks.
fantastic to watch a engineer at work 👍
That's very kind of you Mick👍
@@atlasvantech its good to watch I've been looking at one of these bikes a 59 from a deceased estate for some reason the chap removed the pistons from all of his collection strange that
I just went 54 years, back in time. Thank you so much
You're very welcome, Bud👍
Nice repair .
I'm glad you found it helpful, Jerry.
Where do I buy this kit shelving
Good afternoon. You can contact us on 01292 474746 or email us at malcolm@atlasvantech.co.uk where we will be happy to help.
Hi... Thanks for posting... Out of interest did you do compression test on the engine before taking apart?
Hi Andy, No, not on this occasion. I pulled it apart to cure the rattle on the top end and measured the rings which were worn and replaced them while I was in there. Plenty of compression now though!
Cheers... Have a 59 g12 very similar to yours... Bout 130 psi both cylinders kicking it over a couple of times.... 63 years not bad i guess...
Beautiful absolutely beautiful ride, thank you, haven't been on as nice a ride since 50 years ago on my 1964 Triumph 500 through the forests of Ben Lomond to the beach in Santa Cruz Ca. Thank you again. Nice bike too by the way, its got good power!
Thanks for your comments James
She looks stunning Malcolm,bit late to this video but well done on the rosette, glad all the hard work payed off mate 👍
Thanks 👍
I personally would of mounted the beacon on a single roof bar or stand off to comply with regulation 65 chapter 8 360 vision notes as the vans shape slopes forward leaving a higher rear end
✋ քʀօʍօֆʍ
that was excellent ,great workmanship👏
Nice vid malc, perfect conditions as well which is always nice , great job sir 👍
Thank you Andy.
Hi what adhesive are you using to seal van windows
Joyous 👍
That is a work of art, looks completely original except maybe the pipes ?
Glad you enjoyed. She's a very original bike. If not original, I believe the pipes and megaphones are excellent replicas!
wow ! All that great care you took on the rebuild has paid off...the engine sounds perfect. How did you learn your engineering skills ? Love that road too. Don't recall seeing another vehicle
Yeah, it was lock down. A bit naughty!👍
did you rebuild the bottom end as well ?
No, only the top half.
congratulations, motor sounds great to me
Thank you!
at this point I'm wondering if you can machine the piston as well as the grooves. Does it even matter if the piston is a fraction out seeing as the rings are doing the work (I'm a carpenter BTW not an engineer)
Sorry for the delay in getting back to you. The problem you'll create in reducing the piston diameter beyond the recommended tolerances is piston slap. The piston will effectively rattle in the bore. Not recommended! Malc
The suspense is killing me !
fascinating, I'd be very happy if I had an engine rebuilt by you. Looking forward to watching you enlarge the grooves....
Pa que sirve esa weá?
para llevar a tu madre
Very interesting the tips on the oil ways on the rockers there are a few AMCs that are complete rebuilds but sound like threshing machines that’ll be why 👍. I use copper head gaskets as I’ve found composite don’t last very long before failure. Thank you
Thanks Stuart, I'm glad you found it informative👍
Great video lovely bike 👍
Thank you Mick, much appreciated👍
On my BMW R100/7 I have cast alloy Krauser pannier frames and a rack. I drilled though the alloy rack and used robber 'bobbins' when attaching the Craven topbox. This means the top box isn't rigidly mounted like yours but has a small amount of 'give'. The miniscule amount of rubber on your brackets merely protects the paintwork and has no cushioning effect. I am interested in how the lid of your topbox stays almost upright and doesn't go the whole hog and goes right over like mine. I didn't see a stay or cable of any kind.
Good point Paul! The lid just seems to stop at the hinge travel. I didn't pay too much attention to that, but I'll have a look! Malcolm.
I really enjoyed your videos especially the tips re the oilways .Please put more on.
Thank you Christopher, I will as time permits!
Sorry but the volume is way way too low to properly hear you.
Mmmm, I use an ancient pair of Tsunami speakers, Paul, and the volume's fine. I do check these things! Don't take this the wrong way, but have you checked your volume settings? Malcolm.
@@malcolmrodgers5158 Sorry Malcolm but my laptop is flatout on 100% volume. Some other videos, but not all, ate also very very quiet. Paul.
@@paulnarramore6828 Something I'll need to bear in mind Paul. Thank you for bringing it to my attention. I tend to use remote speakers. Malcolm.
over the top video, the bloke has got too much time on his hands no need for all this
Brilliant. Great idea. Thanks for sharing.
Wow what a treat this ride was on a Superb Motorcycle. 👌
Thank you Alistair!
Not much on the fitting of a 3 bar roof rack!!!
Heart in mouth time 😳
Awesome! well done my friend.
Thank you, Mark👍