Відео

Glad to help friend.

Glad you liked it!

Yes

Glad to help friend! Good luck.

Hello, there is no such video. I assume that there may be a problem in the dynamics, I would swap the speakers in order to check what's wrong. The speaker began to work poorly or is there a problem hidden somewhere before it.

@@nicebek6583 thanks for your response. i did open the headband and found out that there are cuts in the wires. i was told that i could insulate with with electric tape but that didnt work. do you know what else i could do to fix the problem that doesnt involve buying spare parts or a new headphone?

@@EbereChikadibia-Ogu You can ring the broken wires to find the break. Then solder the damaged areas and put heat shrink on this area to prevent short circuits in further work.

@@nicebek6583 thank youuuu

@@EbereChikadibia-Ogu Sorry for the long reply, this is my second channel in English, I visit here much less often. Glad to help and good luck with the repair.

20$

Unfortunately no, you can try printing the part on a 3D printer if it is made of plastic.

Hi, I work with a soldering iron temperature from 390 to 500 degrees Celsius, it all depends on the element that needs to be heated, if it is an SMD component then I set the temperature lower, but if the element is large then I change the soldering iron tip to a larger size and increase the temperature if it is not enough to heat up the solder.

@@nicebek6583 I was talking about keyboards plastic pin. I don't think you used 350/500 celsius to fix plastic pins.

😊很實用。讚美。

If you live in Russia, then here. www.eldorado.ru/cat/detail/igrovoe-kreslo-zone-51-cyberpunk-limited-blue-z51-cbl-bl/

If you do not have the skill to repair digital equipment, then it is better to contact a specialist workshop, otherwise you may only end up breaking them completely. If you know anything about repairs, then disassemble and test the battery, it may be the culprit of the problem.

I'm glad my videos are useful!

Thanks friend, good to hear!

Hi, I don't know, I think you have several options. 1. find this part if it is for sale. 2. Try to make it yourself, for example, print it on a 3D printer, you can also try to take it from some other headphones, but it may not fit with the mounts. 3. try to rip the headband apart, but whether you can sew it beautifully depends on you.

I have exactly the same problem.

@@nicebek6583 alright thank you🤌🏻

@@manchee1910 🥲

​@hudaabdullah7575 it happened to me today 😢 what I should do ? I byed it so expensive

Headphones are of average quality, not the best but not the worst either.

It is.

Hello, I am in Russia, unfortunately I will not be able to help you physically. I can only give advice, most likely some wires in your headphones are shorted, you need to take them apart and check if everything is intact. If you do not have repair skills, then give it to craftsmen like me, they will help you with this issue.

I don’t know, maybe you can find the same headphones that don’t work and take this part from there. You can try gluing it together. You can try making a pin and drilling holes to insert it inside.

What do I have to do with it? If there are no repair skills, it is better to give it to the workshops. I showed in detail how to do it, here you can blame only yourself and your hands!