Відео

They are!😂

You even replaced the wrong one or wiring problem or a blowing fuse . What code do you have?

@@hanitwfik P0330 Code P0330 indicates a fault in the Bank 2 Knock Sensor 2 electrical circuit for a predetermined period of time. That’s According to my check engine

@@hanitwfik was told bank 2 was the passenger side , I have a 07 Tahoe 5.3 ltz , changed it, still have same code

@@hanitwfik what fuse could I check ?

@rafaelnavarro8857 bank 2 is the passenger side . Let's do this if you have a scanner when you erase the then started the car dose the check engine light stay on or comes on right away or how long did it takes for the light to come on ?

Nope

@@hanitwfik ok thanks you

@@papitb3904 you more than welcome

"I’m sorry you didn’t find the video helpful. I try to provide valuable content, and many viewers have found it useful based on their comments. If you need more specific assistance, it might be a good idea to consult a professional mechanic directly."

Nope

of course it will keeps grinded your camshaft and the rocker arms then the dippers might blocking the oil screen .then you gonna have a misfiring problem it will damaged the catalyst convertor

you are welcome 🙏

you know all shops and mechanics has different prices but to me if you have the same engine in this video i do it for $600 to 700 labor only

correct

@@hanitwfik thank you so much

@@hanitwfik where can i get the diagram from?

@@Ahmedahmed-lu6vx alldata.com

@@hanitwfik i learned from ur video and fixed my car by myself, its been 3 months no one knows whats wrong with it! Thanx allot ❤️

FOR SUPERCAB, WINDOW GLASS - REAR DOOR Removal and Installation 1. Remove the rear door trim panel. 2. Remove the rear door mounted speaker. 3. Remove the rear door interior moulding. 4. Remove the rear door watershield. 5. Remove the C-pillar below belt bracket bolt and bracket. - Slide bracket down to disengage from U-channel in door. - To install, tighten to 10 Nm (89 lb-in). 6. Remove the B-pillar below belt bracket bolt and bracket. - To install, tighten to 10 Nm (89 lb-in). 7. NOTE: Some vehicles may use rivets instead of rear door window glass-to-regulator assembly bolts. Remove the rear door window glass-to-regulator assembly bolts. - To install, tighten to 11 Nm (8 lb-ft). 8. Remove the rear door window glass. - Pull the rear door window glass out through the top inboard side of the door. 9. To install, reverse the removal procedure.

FOR SUPERCREW, WINDOW GLASS - REAR DOOR, Removal and Installation 1. Remove the rear door trim panel. 2. Remove the rear door mounted speaker 3. Remove the rear door interior moulding. 4. Remove the rear door watershield. 5. Remove the C-pillar below belt bracket bolt and bracket. - To install, tighten to 10 Nm (89 lb-in). 6. NOTE: Some vehicles may use rivets instead of rear door window glass-to-regulator assembly bolts. Remove the rear door window glass-to-regulator assembly bolts. - To install, tighten to 11 Nm (8 lb-ft). 7. Remove the rear door window glass. - Pull the rear door window glass out through the top inboard side of the door. 8. To install, reverse the removal procedure.

If you work straight, it will take about an hour and a half

You can test it with 12v. You should hear a click. Also, you can blow air by your mouth in the sensor tube it should be blocked, keep blowing, and then give it 12v. The sensor should open and let the ait go through. Good luck

No, I didn't because I checked them they were good

2

Yes . And Denso is the best brand

I have seen it many times

I'm glad to hear that. Thank you, and good luck 👍

Yes, because the relay is internal

whats your car make model . whats the problem . do you have any codes ?

cool 😎 😎

What fuse ?

Yes, and thanks for watching 🙏

Perfect! Thank you for the quick reply and great video!

i had a problem with the lift that day . thanks for watching 🙏

I believe it's the same steps

@@hanitwfik OK Cảm ơn bạn 😀

😂@@Mike-tc9rz Không có gì

left hand driver

Sorry, we dont have this kinda model in the USA, but look for purge fuse

there's no screw you gotta get Coolant Filling Funnel Kit like this one in the link www.amazon.com/EPAuto-Radiator-Coolant-Filling-Funnel/dp/B01I40ZQWE