![Ralph Bagnall](/img/default-banner.jpg)
- 17
- 141 793
Ralph Bagnall
United States
Приєднався 18 чер 2019
www.woodcademy.com/wctv
Woodcademy TV is made for the aspiring novice woodworker to help you Build Your Skills.
You can help support Woodcademy TV through Patreon: www.patreon.com/bePatron?u=39143416
Woodcademy TV is made for the aspiring novice woodworker to help you Build Your Skills.
You can help support Woodcademy TV through Patreon: www.patreon.com/bePatron?u=39143416
Steamship Deck Chair Build Part 2
www.woodcademy.com/
In the second half of our Deck Chair build, we find out about new Teak options for building the chair, build the sub assemblies, fit all the hardware, test the folding and finally apply finish.
As always at Woodcademy, free plans are available for download from our Plans Store.
And our friends at Advantage Lumber has created a special package where you can order the lumber you need for one chair in a bundle, so you don't have to figure it out yourself.
In the second half of our Deck Chair build, we find out about new Teak options for building the chair, build the sub assemblies, fit all the hardware, test the folding and finally apply finish.
As always at Woodcademy, free plans are available for download from our Plans Store.
And our friends at Advantage Lumber has created a special package where you can order the lumber you need for one chair in a bundle, so you don't have to figure it out yourself.
Переглядів: 157
Відео
Steamship Deck Chair Build Part 1
Переглядів 717Рік тому
www.woodcademy.com/wctv WoodcademyTV is back! This first part of our deck chair build includes a field trip to Advantage Trim and Lumber, a look at designing using scale models and the parts preparation for the chairs. Full plans will be available for free with Episode 2.
Pro Level Drill Press Table- Ep 15
Переглядів 3,9 тис.4 роки тому
www.woodcademy.com/season2 An easy to make drill press table that incorporates all of the things I have learned over 30 years as a pro, including vertical drilling. If you enjoy our free content and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Folding Breakfast Tray Pt1
Переглядів 1,6 тис.4 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Folding Breakfast Tray Pt2
Переглядів 5434 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Bentwood Library Stand Pt1
Переглядів 3054 роки тому
Download Free Plans: www.woodcademy.com/wctv Please take a minute to tell our sponsors how much you appreciate their support of Woodcademy TV: Bessey Tools NA: bit.ly/31XeI07 MicroJig: bit.ly/323IP62 Advantage Trim and Lumber: bit.ly/31WnmeW SketchList 3D: bit.ly/31T3mdn M-Power Tools: bit.ly/31T6fux 2Sand.com: bit.ly/31T6J3P
Bentwood Library Stand Pt 2
Переглядів 1954 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Butterfly Leaf Dining Table Pt1
Переглядів 25 тис.4 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Butterfly Leaf Dining Table Pt2
Переглядів 14 тис.4 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Dining Chairs Pt1
Переглядів 7604 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Dining Chairs Pt2
Переглядів 5054 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Folding Router Table Pt1
Переглядів 8 тис.4 роки тому
Download Free Plans: www.woodcademy.com/season2 If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Folding Router Table Pt2
Переглядів 2,9 тис.4 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Backgammon Set
Переглядів 17 тис.4 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
Miter Gauge Upgrade
Переглядів 66 тис.4 роки тому
Download Free Plans: www.woodcademy.com/wctv If you enjoy our free videos and plans, please consider supporting Woodcademy through Patreon. www.patreon.com/bePatron?u=39143416
This is a GOLDMINE of information! Thank you so much for making it! And the plans--Free plans! Almost enough to bring a tear to my eye. I've been wanting a dining table e x a c t l y like this one for years now! It's easy to follow, even for a relatively new Carpenter. I love how you took the time to explain your thinking, especially regarding the wood movement and board placement for the table top! (That is something I had wondered about when looking at different tables' construction; It's nice to see it laid out so plainly here!) I'd rather learn from someone else's experience than to have potentially found THAT one out the hard way. I'm vibrating with excitement just thinking about this project! I've not been impressed by the throw-away fashion furniture and love me a good, solid family heirloom. And even I can tell how much thought and experience was put into designing this table for years of genuine use. A table that is truly engineered to last a life time. Even factoring in general maintenance! Pop out a few screws and reapply/scrape off wax as needed, if it is even needed. Like I said, a goldmine. I'd love to pick your brain though and I'm hoping you'll humor me: -What considerations must I make if the dimensions need changed to fit the space it will occupy? We're talking a 30"Wx72"L table--oddball dimensions compared to most modern dining tables. Would you recommend a full-sized, cross-sectioned butterfly mock-up like you did here? (In my needed dimensions, of course) It could potentially effect the table base dimensions too. Hmmmmm... -Where did you get the hardware from, like the Butterfly Leaf's hinges? The Butterfly Leaf's Rod? -Those beautiful, beautiful clamps. Where can I get my hands on some of those??? The extra long ones, the strap ones--just, YES please. -And while I'm at it, do you think my needed dimensions would negatively impact the functionality of the dining table? Engineering is not a skillset of mine. It seems you've made, and used your fair share of dining tables, so I'd like your thoughts on that, as well. Thank you again for the amazing videos; Wishing you the best! :D
Marvin, Thansk for the kind words! Let's make this easy. Email me at ralph@woodcademy.com and we can discuss all your questions.
Hey Ralph, do you sell a steamer chair kit? Rob
Rob, No, I do not. The only real hardware in these chairs are brass hinges, screws, washers and threaded inserts and the nylon bushings. Pretty much all of it is available through Mc Master-Carr. I have sources listed in the Free plans.
Nice design, Ralph and it looks like it is stable. So you get much wobble from the pivot points that translate to the top when you push materials or does the tightening of the fasteners take care of this adequately?
Ben, none at all. That was one of the reasons for the updated version. The original used thinner bushings and even tight, there was some play. The 1/4-20 bolts through the 1/4” ID bushings leaves virtually no room for wobble.
Thanks for your video and free plans
My pleasure. Be sure to like and subscribe.
Veneering with an iron, !! New to me, very interesting. I am assuming this is standard info to experienced woodworkers.
Not as well known as you might think. I only learned it a little while before the video.
Love this! It's just what I was looking for! I fell in love with an expanding table at a local furniture shop. The price tag is quite heafty. The table expands to seat from 6-20 people, which is great for my family get togethers. How would you go about putting four butterfly leaves in the middle just like the single one? All of the leaves store inside the table. The ends of the table also have Dutch slide outs on the ends. Any suggestions are appreciated! Thanks for sharing ❤
Glad it was helpful!
I just came across this as i was looking for mechanism idea for butterfly table. As you said im also surprised, as its such good video . But if this gent made video abusing people in public for Tic Tok video, it would be viewed by millions.. Thank you for creating this video.
Thank you for the kind words! Be sure to subscribe to the channel and like the videos. It really helps us keep Woodcademy free.
Yes yes and yes I agree with you. Tuning up the factory miter gauge is very worthwhile. My Delta table saw miter gauge received nylon set screws the first week I owned it. I made a simpler miter extension but it is very functional.
I find myself grabbing this upgraded unit as often as my Osborne EB-3
Man what a catastrophe this is turning out to be. My wife, she suggested I make a backgammon board for my son for the holidays. Bought a veneer knife, whole bunch of new veneer, watched this video about 12 times. After cutting the points only a few of the points have smooth borders. The strings look like strings of beads. None of them have a smooth edge. Watched a bunch of videos how to sharpen veneer knife. Sharpened it. Recut the strings. Still rough. WTH. I’ll make it work with sawdust and glue. Bought a squeeze bottle and roller gizmo. Tested the titebond and iron trick. Worked great. Put glue on one set of points and one panel which was 1/4 “ ash i milled, glued and sanded and looked perfect. Came down to iron veneer onto the panels. Panels had warped beyond salvage. Gotta go get some 1/4 plywood and a boatload of veneer which of course my local woodcraft won’t have. Should’ve bought him a Webber grill like I wanted to in the first place.
Very sorry to hear you had such issues. You mention a veneer knife. I rarely use knives on veneer, saws are really the best way to cut veneers. At about the 6:30 mark, i discuss the saws and show the one i recommend. a good saw here really does make a difference. Please feel free to email me at ralph@woodcademy.com if you have questions and i will help where i can.
Did you also put the beveled spacers at the top also?
Yes, the same spacers are used top and bottom. Thanks for watching!
With all that work and expense, you might as well buy a new upgraded miter gauge.
A good aftermarket Miter Guage can run upwards of $400.00 I have the Osborne EB3 which runs about $140.00 currently. For many folks, the effort is worth the savings. Your mileage may vary. Thanks for watching!
Thanks for this money saving video!
So glad you enjoyed it, thanks for watching!
Great work Ralph, and your tips are excellent, I particularly like the one around the mitre joints, being finished on the router table. i am definitely going to give this a try
John, I am happy that you enjoyed the video and found it useful! Be sure to like and subscribe, and if you have not already, check out Woodcademy.com. Loads of tips there like the miter trick.
if you're going to use a cheap plastic protractor to calibrate your miter gauge, flip it over and check that it's still lined up with 90. same if you use a square instead of a protractor.
Checking your measuring devices is always a good idea. Surprisingly, I've found these cheap plastic protractors to be remarkably accurate. Thanks for watching the show!
Thanks for posting this-after getting sick of replacing blue tape, I've just done this with my crappy Dewalt mitre gauge.Ended up with a M4 nylon grub screw as there wasn't a lot of meat on the guage to go for. Will have to see how it holds up.
John, Glad you found this useful! The nice part about the nylon set screws is that they won't mar your miter slot, and as they wear, you can quickly re-adjust them.
Ralph, can you tell me where you got your allen head set screws for the miter bar ? Thank you !
Kenny, When I can't find things at my local hardware store, McMaster-Carr is my go to source. The plans for the Miter Gauge Upgrade list the set screws, but here is the link from McMaster: www.mcmaster.com/products/set-screws/plastic-flat-tip-set-screws/thread-size~10-32/?s=nylon+set+screws Of course, you have to buy 100, LOL
As always explained very well. Thank you so much for doing this. It is less complicated than the Yankee Workshop Titanic deck chair that I constructed.
James, Thanks for the kind words! I wanted a nice deck chair, but designed to make it a bit easier and less expensive to build.
Really like the video. I have the butterfly table almost completed and will be starting on 6 chairs soon. I’m having trouble trying to determine how much and what size wood I need for 6 chairs.
Les, each chair should need about 3 board feet of lumber if the stock is clear of defects. As for size, nothing is longer than 48”. Ideally, you will have one board about 8” wide to cut the two back legs from, but otherwise, none of the parts require wide boards. You should start with 5/4 stock at the minimum, 6/4 would be better.
Could I keep my router attached to the table top while folded for storage or do you think the weight would be bad for table top?
My router was on the original for 6 years and lives on this one now. I have had no issues with the top warping. Thanks for watching the show!
Would it be ok to keep the router on the stand while folded for storage or would this warp the table top? Thanks
It works fine to keep the router on, as long as your plate can be screwed to the table top. The Rockler Lift I use is secured.
Having trouble downloading the plans
David, email me at ralph@woodcademy.com
Möchte ausblend3n
I don't know why I haven't seen your videos before, but they are EXCELLENT! I learned a lot in this video. Love the veneering process!!!!!!!!!!!!!!
Thank you, Roger! Be sure to subscribe here, and you will find loads of free woodworking plans and content ; my Woodcademy.com website.
@@Woodcademyshow Subscribed half way through the video! lol. Also you saved me from a dangerous cut. It's something I would be likely to recognize just as the last fibers were being cut. Thanks again!
Great instructions and easy to follow .
Thank you, much appreciated!
This is a nice build and way to save an old miter gauge. I'll definitely be breathing new life into my old miter gauge with this. One tip you missed... when making the face piece of the fence, and while creating the slots/t-track on the router, add a small chamfer to the lower face side so you have a small area for dust to collect and not cause the workpiece to be pushed away from the fence.
Thanks for watching! A dust bevel is often a good idea. You just need to keep it small, especially if you work with thin stocks like veneers.
Thank you for this great, informative video. Beside the leaf pins, do you use any other locking hardware to keep the two table sides together when the butterfly leaf is not in use?
Jaclyn, thank you for the kind words. I did not use any sort of lock hardware on mine. The table can be easily opened and closed by one person, but it has not shown any tendency to open on its own in the years we have been using it. Ours stays in one spot. If you were to move yours around regularly, a lock might not be a bad idea. But a pair of simple latches would be more than sufficient.
The cut list shows the table top to be 3/4" thick. The written instructions say to mill it to 7/8". Which is correct? I want to be sure the butterfly leaf works properly. Thanks, I'm really enjoying the videos.
Les, functionally, it makes no difference as long as the top and leaves are the same thickness. But the grooves for the dovetail key that holds the breadboard ends on has to be 1/2" wide at the base, and in 3/4" stock, that does not leave a lot of material behind, so I went to 7/8" in the plan.
Most amazing undertaking, happen to secure a complete teak elongated teak table set with 6 chairs and 2 steamship deck chairs a few years back (from Florida) that live outside, it's been challenging enough to replace/repair broken components using teak yet build them from scratch, my hat is off to you.
Thank you, Michael, your kind words are appreciated. If you still need teak for parts, Advantage Lumber now has their own plantation-grown teak available. It is certified sustainably grown on their own land in Brazil.
@@Woodcademyshow Thanks Ralph, they are 5 hours away and I don't need that much teak to qualify for free shipping. Beautiful wood but my projects can't justify the cost.
@@inspectr1949 I get that for sure. Just a source if you ever do need it.
I have been using the same type for 50 yrs. with great results. The play in the slot lets you fine turn a cut. Allways use a wood piece on the fence. Why would anyone want a metal on the miter. Before chop saws we would have two miters, one right and one left 45d.
Play in the bar means no two cuts will be exactly alike. There is a reason that every aftermarket miter gauge is adjustable.
Is there any benefit to building this table with the grain running side to side as opposed to long ways? I see you made it side to side. Any insights?
Mostly it was to accommodate the butterfly leaves. The two main top sections could go either way, but I did not want the grain running across the short length of the leaves.
@@Woodcademyshow Any reason why? Just aesthetics?
If it’s due to expansion of the pins, could there be slots? I’m wanting to go long ways and trying to determine any drawbacks.
Structure, mostly. Having the grain running side to side across the narrow leaves seems like it would be fragile. But the truth is it does not really matter.
@@Woodcademyshow Thank you
be nice if you put links to all the products you use
Joe, I can go back and do this. Meanwhile, any tools you specifically want links to?
Do you have a link to the Pins hardware and the leaf hinges?
I bought the leaf pins from Hafele I believe, but these from Amazon will work. I wanted the type that has the pins and sleeves in metal to last for generations: amzn.to/3mjE4jV
I used Soss invisible hinges: amzn.to/3tiSRzv
HOW ABOUT THE LEVER TO ADJUST THE TABLE ???
I left the factory lever as is to raise and lower the table.
Most exellent video
Thank you, Jim! Be sure to check out our main Channel as well at ua-cam.com/channels/lV27OzOZuVtYNDQeZgYNFA.html
Heres a pro tip. For safe operation use the blade guard that came with the saw.
Bill, you do what you feel is safe. I will never tell you to do anything you are not comfortable with. But VERY FEW blade guards work with miter gauges, especially when you need a backer.
@@Woodcademyshow Actually blade guards do work with miter gauges. Even with a backer. You are encouraging bad safety practices. Your fingers were less than 2" from that blade without a guard or even a riving knife. If you have a kickback like that your fingers will be gone before you even feel the blade cut them off. A small fraction of the fastest human reaction time. Can't fix stupid can we.
Hi Ralph - great project which I am going to build. One question, is there a reason you used matchfit hardware to connect the vertical bracket to the the table (on the bench-top model) instead of just gluing it on? It doesn't seem like it needs any adjustability unless I am missing something. Thanks!
I meant to say hardware used to connect bracket to the vertical board that you clamp the work piece to, not to the table. Couldn't you glue the bracket to the vertical board?
Todd, Glued may be easier, but I wanted it to be adjustable just in case. One cool bit about making your own is you can adapt as needed.
Thank you so much for this video. This project was for my mothers birthday and this game is a sentimental memory for my family.
Laura, I'd love to see your version of the game!
Cool solution but lil suggestion 👍 if you want something a lil longer lasting you can get dog point brass tipped set screws they're like the name brass tipped and the dog point is extended out and flat also to keep from having to adjust them a lot from saw vibration backing them out etc get some shorter brass tips get them adjusted then run a short regular set screw in behind to lock your guide screw in place 👍👍👍
Also if you're not used to working with metal and want to get an accurate start for your drill bit instead of center punching your bar use a center drill first then run your tap drill you can get a cheap set at harbor freight or online for under 10 bucks 👍👍👍
Great ideas, thank you for sharing! There are any number of good options. I chose the nylon set screws for cost and ease of use for the average woodworker.
Very good instructions. I am doing now 2 backgammon for my family . I will be happy if you could send me more details about how long to let the glue to dry before ironing ? Thanks
David, the yellow glue should be pretty much dry before ironing, 15-20 minutes.
@@Woodcademyshow thanks
Thank you very much for the classes. If you come to Brasil, let me know it’s going to be a pleasure showing my shop.
Deal!
Exelente forma de explicar el proyecto saludos cordiales lo felicito
Thank you! Gracias
the quality and the content is excellent. I was pleased to find it.
Thank you very much, it is great to know the effort is appreciated.
I'm thinking of making a backgammon board. Not sure it it will be veneer or hardwood but you have some great info here. Helped a lot. Keep them coming.
Glad it was helpful!
WHAT THE MILL IS CALLED THAT YOU USE ON THE ROUTER???
Carlos, the router bit used for the slides is a Drawer Lock Bit.
Really wonder for watching vedio and thanks.
My pleasure, I am glad you enjoy them!
Wouldn’t you know - I bought an upgraded miter gauge and it won’t fit my 1963 Craftsman. Grrrr! I’ll work a bit on the table miter slots and see.
How wide is the slot on the Craftsman?
I've been looking for some thing like this for small pillar drill. I ordered the match fit system a week ago and been on the look out for ideas for my small work shed. Thank you, keep up the great videos.
Glad I could help
Very good instruction! I particularly enjoyed the discussion on the colour changes with age, a somewhat overlloked subject! Thank you!
My pleasure! Thanks for the kind words.
I love this!!! Too bad I don’t have skills but most importantly, I have 0 tools ahahaha I think you might need to add some tags # because I’ve been looking for these types of tray videos and I could never find one. I found it today because I want my husband to somehow make me a floor-dining-picnic table.and this came up with “folding legs.”
Thanks for the tips! Check out the Woodcademy Website for loads of free plans and info! www.woodcademy.com
Well done. Thank you.
Thanks for watching!
I am in process of construction out of Northern Ash.