- 1
- 104 990
Yoshi Olsen
Приєднався 4 чер 2018
Hidden Blade (extended,dual action) - assembly
This is an instruction video on how to assemble my 3D-printable hidden blade from Assassin's Creed!
You will find the stl-files here:
www.thingiverse.com/thing:2914865
You will find the stl-files here:
www.thingiverse.com/thing:2914865
Переглядів: 105 004
Yo, this was sick and I been working on mine. After sanding some rough patches here and there, I got the thing work. The issues I kept running through was that the blade never really retract or appear all the way. It somehow alway goes to some area to the blade house or either the slider that seem to be tighter. I try sanding it away but I don't want to take off too much. It worse when I place the rest where I dry test them to see and we'll, it would work. Maybe it was the rubber band I used but even without the cover, i remained back at the root of the problem (I think) where it was tight in the middle, back.
Alright so an update. long story short: it works. But (for me at least) it needs to be modified mostly on the upper portion of the whole thing. The two arms that are with the wheel needed the most of it because the angles (The one that makes the center switch move back and forth whenever you use the string) needed to be beefed up quite a bit, but not so much that it interferes with the slider. The inner walls were also a bit too thin, which made the switch barely even touching the ramps. Luckily this was fixed by adding several cut pieces of thin cardboard (such as cereal box or, what I used, the cardboard portion of a pack of batteries or screws in this case) on both side on the wall where the arms go. Measure and cut them just about the width and height. same thing with the arms, albeit you need to stack them enough. Continue to scrape and sand some layers off from there until it works. It is a bit time consuming, but you'll get there. The second obstacle occurred during a test run. Whenever I put the whole thing together and pull the trigger, it didn't work. I try several times to figure out what was the issue until I found out that the left arm that sit right on top of the slider (The one that activates the blade) keeps popping up. What I meant when I say this was, whenever I pull the string, the arm automatically derails itself from the slider. I later found out that the reason for it was the cover. Turns out it was so thin and flexible that it doesn't have enough strength to keep the arms down, essentially preventing the derailment. This was quickly fixed with some rubber bands on the center, which the issue keeps going over. however, there are better solutions to this, either reinforced the cover, make an entire cover out of wood so that it doesn't flex, or you can edit the file to make it thicker. Hope this helps!
horrible, how do you record a tutorial video and let your camera to crush and just continue without showing what was lost before?
Parts list? ik its pretty simple but still, i wanna get it right
gracias por hacer esto gratis buen tutorial
Watch out this is a complete scam it doesnt work at all this shitbox needs the power times 500 to work it gets out about 2 cm
1:20 what did you do here explain?
Would this design technically work as a full metal version as well?
Yes
Hey, Yoshi I was just wondering were to attach string and ring to please! Love this design a lot thanks!
LOL deez nuts
could you please post the part when the camera crashes
How do I get this model
please show what you did when the camera crashed
I found out how and if i am not wrong the screws are 2 and half mm wide
Great work! I would also like to know whether you came up with the idea for the thing with the rubber band on it that slides back and forth to control the whole blade or you saw it some where else.
how can made assassin gun samelike this
Interesting design, very similar to the one that Shelden Caudill did, only without the ring. Looks pretty good :)
Which 3d software is best u ever used
How do you get it to retract?
what does he do when the camera cashes ???????????????
Is the ring mechanism working for this?
I did everything as you did.. but still not working at all.. I don't know did I do wrong.. :/
What filament did you use
PLA
Dude i just litterally freaking out to assermble the blade cover, because idk how to put back the little pice inside with only the printed thing, the missing part of the crashed camera is not understandable, pls someone can help me, i'm in struggle for two weeks, and re-printed the blade cover like 4 times
i will try to help you
@@furk4n05 i figured out how to do it, thanks anyway
@@matteofranciosa2207 can you explain?
@@matteofranciosa2207 EXPLAIN
@@furk4n05 how i can do it? i have the same problem
I reworked this entire model. I even made a pla part for the duel extended blade to lock (the part where the camera apparently crashed). I will upload it to thingiverse if there's enough people who are still interested in this design. It works amazingly well in fact it's one of my favorites
Link?
@@SuperTommy117 I'll upload them in a bit and give you a link. What printer do you have?
@@AntiKipKay that would be awesome thank you!! And I have a cr10 s pro v2. Amazing printer in my opinion! :)
@@SuperTommy117 ok here you go www.thingiverse.com/thing:4694383
@@SuperTommy117 Also I only uploaded the files I worked on so you still need to download the rest from the original creator
pls respond what size screws did you use i what to make this
Hola muy buen diseño. Puede ser que la traba de la hoja que lleva un trozo de alambre lleve alguna gomita por dentro? Para que se trabe cuando la hoja se extiende
nah bro
The one part I can't figure out is the inner blade lock. Please help
Hey i wanted to ask, does the external blade lock? I mean, the first part of the blade. I would like to know because i want to print this one too 😅
thank you for the file
what with string
Having some struggles assembling the blade as it isn't shown how the hinge works. Do you care to elaborate on that if you're still active?
Hey buddy ı want the ask something if ı PUT there a Ring and a rope it's can be automatic blade?
And the paper clip? My God, one micro meter out and the whole thing jams
2:50 that piece at the left end is TOO THIN!
My God this is driving the hell out of me from assembling it. You NEED to make the thin parts thicker and please please keep in mind, glue won't withstand the rubber band
I'm 3D printing it right now. I hope I can assemble it properly. Wish me luck.
So, how did it go? I want to print this one too so i wanted to ask if you had any problems or something with this.
@@BIANCOBA Never fully assembled it becuase I couldn't find small rubber bands and the appropriate screws lol
@@baconpancakes8899 lmao 😂😂
@@baconpancakes8899 Try using loom bands
@@baconpancakes8899 The 'loom bands' should work they are very good for blades!
Does the blade lock?
can you also use it with like a rope and a ring
Hi! Could you upload a video demonstration of the alternate version as well, the one you use a string and a ring to open?
You attach a string and ring to the mechanism bruh
Is that from shelden Caudill paper hidden blade prototype? I think it similar expecially the spring out and spring in triggerer part
My ass yes, the camera crashed rather said that it was a difficult stage and that you were too lazy to film it !! Pfff
😢😢😢😫 say to him We need you
this is a double mechanism?
what did you do that the blocker springs back at 1:22 ? my one dont
Did you find the exit in this problem? I dont know how to do it too.
@@alexkarev2118 ye figured it out. just did a ruberband into the hole and glued it on
@@theGigander123 i have the same problem, can you explain better please?
Or at the least subtitles
Thanks man.
You're the best bro, the brotherhood will always be by you.
this is too thin to even 3d print
justin zhao wrong. You can print with ever 0.01mm layer heights with 3D printers. Get your facts straight.
How long did it actually take you bro ?
What materials do we need?
PLA Filament
What is the nut size
You could try to make the button one activete from the flexing of the wrist muscle, like described in the game
That mechanism is almost impossible to design.
Imdeepainreborn did it, check his youtube channel
I'm not sure why you made the slider in 2 parts to be glued together. Doesn't printing them in one piece makes the slider stronger? Other than that great video!
I've been looking at hidden blade desings for 5+ years now. This is the best one by far.
Me too bud
Same
what does he do when the camera cashes tho
Not really,checkout Rawice's channel
ua-cam.com/video/ZNnq1Y7U4Xg/v-deo.html how is this? I also have a better more slim one with medieval carves.