Відео

Thank you for useful video!

after watching your video and the 2 or 3 other videos that cover this technique i have been attempting this recently and my results are not coming out as well. could i possibly ask you a few questions? i must be doing something wrong because im still having 80% of the ink wash away and im left with dull desaturated trash.

does this work for A4?

Thank you for sharing, I actually tried this technique on my own for my side business a while ago and I got discouraged because if you scrub a bit too hard you'll end up scrubbing the ink off, and after drying I did see paper leaves a hazy white shade on the print, but sealant does hide that, I also bumped the temperature I normally print with a bit up (maybe 10C) and reduced 1st layer speed a lot, I'm going to try this again You are right, not many people are doing this, up until maybe 6 months ago the only video was the one with the hat brim that you showex

Hi what acrylic materials did you use

I don’t know if it is a new update or what, but it won’t let me pick anything but their sticker cut settings. It won’t let me use a custom made setting. And none of their settings are cutting through for the dye cut. I’m stumped on the settings, you can change the pressure on their premade sticker settings but when I put dye cut to 350 it still doesn’t work. It’s so frustrating.

Super cute, however the resin under your pin back isn’t curing. It’s still uncurled resin and that pin back is only being held on by that thin top layer. I’d glue it down with some e6000 or something of the sort then add that thin layer of up on top after the glue has dried.

if ur looking for a good editing program like this kinda i suggest silhouette studio. its for the silhouette machine but if u have the business edition u can save ur work to svg or whatever you want to use. and if u ever want a cutting machine u already know how to use the program :)

What about shrinky dinks for the inside shaker pieces?

You didnt show what settings you cut on. Would you please share that?

So many different shades, it is amazing

Oh, I don't usually like Halloween decor, but , girl, that is very pretty and original!

do you have laser cutter recs? I would prefer if it's mini version, because my budget is tight.

I don't understand what you're doing can you narrate step by step please. Don't know what you did to the first piece. We're you just dusting off the engrave on the first piece?

ewwwv ai art

how do you create the kiss cut?

Great video thank you for showing the process

so even though the offsets are the same size it will cut as a die cut? I am so confused LOL

Thank you! I have watched no less than 50 of these die cut specific videos. You are the first to actually explain ‘the why’ behind copying the offset layer 3-4 times then merging with the design. So many people just say to do without explaining the reason which makes me question the necessity of a step. Now I understand the extra copy layers are basically telling the cricut to cut again & again automatically so it cuts all the way through the material. No reloading machine necessary. Thanks again! 🎉

You said nothing stuck to your holo plate, until you what?

I'm having trouble with the ink coming off the print and looking smudged when taking the paper off. Is there any way to combat that?

Great video! What are the measurements for each square?

Instead of filling it with water prior to welding(I know you said it's not waterproof eitherway), couldn't you just leave a small little area for a needle and inject water after the rest is welded, then just resin seal that hole you used? I would probably use something like propylene glycol over water, I think it would provide a more snow globy effect. Not sure though, just thinking out loud.

That’s pretty awesome results! Ty for sharing ^^

Great job, Sarah! I really like the set up you went with. I'm trying to redo my set up right now and it is chaotic 😂

It's not an enamel pin though? Yes it's *a pin* but there is literally no enamel?? Why you people keep claiming them as enamel pins is beyond me. The quality isn't remotely the same.

Try exporting your file as a pdf rather than an svg. I’ve been using light burn for a few years and this file type works really well for me. (No scaling issues). Also, the new version of light burn allows you to simply enter the material thickness in the Gweike cloud rather than performing the math.

That’s so awesome, I’m trying to cut the square on the cardstock but when I make the 8.5 x 11 inches square my cricut cuts it 8.5 x 11 and 3/32 inches. Do you know what could be causing this issue?

Fantastic share!

Looks great! How did you do to not get the typical 3d printed “lines”?

Are these paper or 3d printed?😮

Can you do the sticker without the white - border ? 🙂

Thank you for the great video I am anderiod user and my cricut printer and cut options is no longer working due to FLOOEDED light😅 Is there any way you could show us how to print full page using anderiod programs on phone or samsung tablets!! I have tried other options but non of them worked properly!! Much appreciated

Random question: which other fonts would you recommend for cake toppers? :) Been having issues choosing from the millions of fonts available in Canva and rather have a solid idea than being frustrated!! Please and thank you if you're available to help!

That's so strange that using hairspray worked. I'm no expert by any means but if i had to guess, maybe some form of moisture barrier kept the wax from seeping into the surface of the plastic. By that logic maybe what would work even better is using some form of oil or lubricant on the surface of the stamp. Also perhaps resin printing would produce better results as it comes out much smoother and far less porous. Although its not as accessible and FDM is what most people use

Do you have to have the procreate app to print the template

Looks awesome! Happy birthday to your daughter!! 🎉

Very interesting video, thank you! Can I ask you what coolant you use when servicing the machine?

This inspired me to try this out. I hope all my kit arrives this week for it. If it works well I may get some custom build plates with a grid on them and a pattern that can be imported into Bambu Studio for alignment.

Thank you for this. We're curious to know what laser printer/cutter you are using to cut all these out? We do not see it in the description. Thanks again.

this was fun to watch, im new trying to get into 3d and modelling on my iPad

Are you placing acrylic on top?

Does this work with a variety of stickers on one page? From what I'm seeing in the video, it's a single design being printed, rather than a variety of sorts. Please help. Lol

I was watching your previous video where you explained to print in externally eg off your computer and then upload it onto design space but not using the print then cut setting. Is that still the case?

Vinyl stickers are probably too thick to allow the acrylic edges to touch. If you engrave a shallow pocket for the sticker to set into, you may have better luck. I think that may be the issue with the paint and resin as well. If either of those is even a fraction above the surface of the acrylic, edge contact will suffer. Another thought... if you are going to have any scoring or engraving on the inside, make sure the melted edges of the score/engrave are not protruding past the surface. If so, knock the high spots down with a small file.

This is a HUGE help!! super excited to try this out and see how it goes 🎉

Very helpful!

Very cool! Thank you!!! I have to say that your pup is the real video star!

That was pretty cool. Thanks for sharing.

Great video! Thank you for sharing xoxo