- 47
- 275 831
VitaminK333
Приєднався 30 лип 2010
Ford Falcon AU Turbo Ute POV
Hi everyone,
I'm back in Melbourne for a little while and the best way to start, is of course with the Ford AU.
Most of you wanted to see more driving footage of the AU, so here it is.
I know you all want to see this thing getting thrashed (as do I) so we can all see and find out how it will perform, so that is the goal whilst I'm back.
I dare say all going well it should be ready in a month or two.
Just need figure out the right option for a clutch that will perform and also not blow the gearbox at the same time.
Thanks for watching and I hope to have some more videos out soon :)
I'm back in Melbourne for a little while and the best way to start, is of course with the Ford AU.
Most of you wanted to see more driving footage of the AU, so here it is.
I know you all want to see this thing getting thrashed (as do I) so we can all see and find out how it will perform, so that is the goal whilst I'm back.
I dare say all going well it should be ready in a month or two.
Just need figure out the right option for a clutch that will perform and also not blow the gearbox at the same time.
Thanks for watching and I hope to have some more videos out soon :)
Переглядів: 2 260
Відео
Nissan S13 CA18DET - Back on the road
Переглядів 1644 місяці тому
Hello everyone, The first stage of the car has been completed. BC Racing Coilovers ABS Delete Intercooler Fuel Pressure Reg Catch Can Sparco Seats RRS Steering Wheel Welded Diff and some other stuff hear and there. Plenty more to do to get it 100% though for now she runs and drives so time to enjoy it before the next stage of modifications. Hope you all enjoy and thank you for watching. :)
Nissan S13 CA18DET - Removing ABS, Front Brakes, Front Bar & Stock Intercooler
Переглядів 16011 місяців тому
Hi everyone, Another longish video. In this one I remove the front bar, disassemble the front brakes, removed the factory intercooler and also removed the ABS from the S13 to get it ready to install the GKtech ABS delete kit. Thanks for watching
E36 Third Drift Day
Переглядів 10111 місяців тому
Hi Everyone, This video is just another lap after lap and a petrol run in-between. Getting the feel of the car now so trying new things and enjoying the journey. Thank for watching :)
The Car I Have Been Hiding - My Australian Delivered 1992 Mazda FD3S RX7
Переглядів 174Рік тому
Hi Everyone, I guess the secret is out now. This is my Australian delivered 1992 Mazda FD3S RX7 that I bought back in 2012. It's a stock 13B twin turbo with factory sunroof and leather. As you watch this video you can tell that she is in need of some TLC. The body is the same condition as when I purchased it, minus the rear spoiler that I removed, added some smoked lights and I painted the stoc...
Last Time I Drifted In Australia With My LS1 S13 ONEVIA @ Keep It Reet - DRIFT BIRTHDAY 09/12/22
Переглядів 183Рік тому
This video is some old footage that I never got around to editing. It was the last time I drifted in Australia with my LS1 S13 ONEVIA and it also happened to fall on my birthday @ keep it reet Friday night drifts 09/12/22. Hope you enjoy this video :)
E36 Second Drift Day In Greece - WITH MAJOR CHANGES
Переглядів 248Рік тому
Hi everyone, The e36 has had a lot of changes done since the last track day. BC coilovers all round CNC71 full angle kit Dual caliper setup with RRS hydraulic handbrake Stripped interior Sparco race seats RRS harnesses Battery relocation to rear ABS delete and I think that's about it. This will be the final stage for the e36 unless something breaks of course, but other than that I will do some ...
RB S13 Chasing LS UTE
Переглядів 243Рік тому
Hi everyone, this is some old footage of me trying to chase back in the days when I had an RB in the S13 and my mate was in his LS ute. The footage is a bit on the darker side but it is what it is. Hope y'all enjoy :)
E36 First Drift Day In Greece
Переглядів 537Рік тому
Hi Everyone, The day has come where I drift for the first time on a track in Greece at a place called Drivepark in Neo Rysio, drifting an E36 and also drifting LHD. First I want to apologies for the wind noise from the go pro mic (my bad). I had set it up in the centre of the cabin with the windows down and you will understand once you watch the video. I will do my best next time to resolve thi...
S13 & E36 Update
Переглядів 152Рік тому
Hi everyone, In this video I do a few quick little jobs that include changing the fuel filter on the S13, that has fixed some of the power issue the car was having, as well as replacing the door window switches and removing the cream door panel trim on the driver side. As for the E36, I have removed the rear seats, seat belts, trims and the boot trims as well. Thank you for watching :)
New Country New Car Collection - Nissan S13 180sx (200sx)(240sx) - Walkaround
Переглядів 153Рік тому
Ok, so this is the first car I bought here in Greece and what a car to buy. This is my Nissan S13 180sx or 200sx or 240sx, all depending on where you live really hahaha. The car has a CA18DET that will need some loving, as currently I feel like she is not running 100% and also in need of some supporting mods. Plans for the build will be setup as a fun street cruiser & then we shall see where it...
NEW Country NEW Car Collection - BMW E36 Street/Track Drift Build - Walkaround
Переглядів 292Рік тому
NEW Country NEW Car Collection - BMW E36 Street/Track Drift Build - Walkaround
My 1975 Ford Falcon 500 XB - 393 Cleveland + 4 Speed Toploader & 9"
Переглядів 6 тис.Рік тому
My 1975 Ford Falcon 500 XB - 393 Cleveland 4 Speed Toploader & 9"
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 7 - HALTECH
Переглядів 4,3 тис.Рік тому
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 7 - HALTECH
LS1 S13 ONEVIA Friday Night Drifts @ Keep it Reet
Переглядів 3642 роки тому
LS1 S13 ONEVIA Friday Night Drifts @ Keep it Reet
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 6 - SHE DOSES
Переглядів 1,9 тис.2 роки тому
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 6 - SHE DOSES
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 5
Переглядів 1,2 тис.2 роки тому
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 5
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 4
Переглядів 2,4 тис.2 роки тому
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 4
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 3 - How To Make A Turbo J Pipe Manifold
Переглядів 3,3 тис.2 роки тому
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - Part 3 - How To Make A Turbo J Pipe Manifold
I bought a 2002 Subaru Liberty wagon + car updates
Переглядів 7012 роки тому
I bought a 2002 Subaru Liberty wagon car updates
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - PART 2
Переглядів 2,3 тис.2 роки тому
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - PART 2
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - PART 1
Переглядів 4,4 тис.2 роки тому
Ford Falcon AU - TURBO DAILY STREET DRIFT BUILD - PART 1
VY CAMMED LS1 T56 UTE - PART 4 = DYNO & FRONT SPEAKER INSTALL
Переглядів 8922 роки тому
VY CAMMED LS1 T56 UTE - PART 4 = DYNO & FRONT SPEAKER INSTALL
NEW DAILY? VY CAMMED LS1 T56 UTE - PART 1
Переглядів 4,1 тис.3 роки тому
NEW DAILY? VY CAMMED LS1 T56 UTE - PART 1
I BOUGHT A 2005 MAZDA RX8!!! PART 3 (THE FINAL PART FOR NOW)
Переглядів 2293 роки тому
I BOUGHT A 2005 MAZDA RX8!!! PART 3 (THE FINAL PART FOR NOW)
Ur car around thommo much? Im about to stick a built motor and built btr into my rtv, would love to go awd aswell but its a bit of fkn around, just gotta finnish paying the engine off.. Neat build mate, love it..
Hey mate and thank you for the kind words. The car would've been around thomo about 2 to 5 years ago, though not turbo. RTV with a built motor plus box is asking for a awd setup and some bush bashing hahaha, would be sweet. All the best with the build mate 🙂
Not sure if you said it in video or not mate as i just skimmed through this vid, i had similar misfire on mine, plugs helped but replacing coilpack was the complete fix
It did clear up towards the end of the video and the car ran sweet. Would've been a combination of old fuel and plugs. It also has brand new coil pack in it but thank you for your feedback 🙂
far outt, can u send me the set up was this a NA to a turbo?
Yes, it was NA to turbo with a J pipe. I have a video on how I made it. This is the link if you are interested ua-cam.com/video/n0S-F3piNZQ/v-deo.htmlsi=78Lvc2-wE3pCQjhN . Cheers
@VitaminK333 legend thanks so much man!!
@@Darkshadoz you are welcome mate, thank you for watching 🙂
Where is the airbag steering wheel?
I removed the airbag steering wheel, so I could put a deep dish steering wheel on it. 🙂
Sitting a year and a half and your wondering why its running shit? Put some fresh fuel in her. I let my ED sit for 9 months, then took it out and it ran like crap over 3k. Changed plugs, leads, dizzy etc and it still ran shit. I put fresh 98 in it and she was sweet
100% agree with you. I knew that was the reason, though it did clear up and ran good after as you can hear towards the end of the video, especially when I was having fun on the grass. Thank you for knowledge 🙂
@@VitaminK333 Awesome mate 👍 We never really think of fuel yet without it we have an ornament.
@@SassyXR6007 true true hahaha
Atleast half of the au engines i come across are neglected and need a rebuild, its sad.
Yeah that's the only downfall. Lucky enough I have owned mine for quite sometime and done all the neglecting hahaha
Or even in a nice VCT badged Fairmount gear or Fairlane.
yeah, I think a VIP luxury build would look sick
I want that motor in an immaculate AU Forte sleeper.
do it hahaha
Loved the vid mate, Can't wait to see more
Thanks mate 🙂 I'll try my best to keep them coming
Love it, should leave the interior as is though 😂
Thanks mate 🙂I think I will be leaving in some of the interior
love it man
Thanks mate 🙂
Old mate in the GTS was probably pissing himself when he heard the turbo from the AU
Hopefully it put a smile on his face 🙂 I'm just glad he didn't try and race me hahaha
Sounds amazing
Thanks🙂
yessss
hahaha thanks mate 🙂
What injectors and fuel reg did you end up using?? And what did you do about the Map sensor under the throttle body ?
Hey mate, ahh by memory I used an aeroflow FPR adaptor on the back of the stock rail going to a Turbosmart FPR 800, injectors I used bosch 1150cc, and as for the map sensor i'm sure the haltech wired straight to the existing one that came stock. I hope this helps, it's been a while since this car has been built, though if you need some more help I'll try dig up some more info for you. Cheers
absolutely love it it’s given me so much motivation to finish mine awesome video mate
Thank you mate 🙂I'm glad you are motivated as we need to keep the old girls alive hahaha. Enjoy the build process, that first drive and the many drives afterwards. All the best
Thank you so much mate!! Hopefully I’ll see you on the road one day!! Cheers, Bash.
Nice 👍
Thanks mate 🙂
lets gooooo!!!! the car looks and sounds amazing!!!
Thank you :)
Nice job dude keep up the good work
Thank you for the kind words :)
Excellent work cool sleeper love it
Thanks mate 🙂
That looks so Cool! Amazing skills btw my man!
Thank you 🙂
Thanks for the walkthrough my man!
You are welcome 🙂
We need more turbo au content🤔🤔😅😅
I'll keep that in mind once I'm back in Aus as I too miss the AU. Thanks for watching 🙂
Can I get some information on how you ran the intake pipping
Hey mate, watch the Part 6 video and at the start of it I show how I ran the intake piping. This is the link ---> ua-cam.com/video/m70BTKFTcAU/v-deo.html cheers :)
Killa
Abandoned in Australia
Shhhhhhh
God Damn that cleaned up nicely
Thank you but still a long way to go :)
Preston 👊
😉
Very nice
Thank you :)
I like the rattlesnake sound the car makes after you rev it ..🐍
*Promo sm*
Great job mate love following your build
Thank you mate and thank you for watching :)
She can sleep in my garage any day of the week
fuck me that rb sounds so good
Thanks mate, it was a standard manifold with a TD06 and 45mm external gate :)
@@VitaminK333 sweet bro
Was this at south morang? Use to love working night shifts on the train line when you guys were into it
Sure was mate and the flashing amber lights on the train lines could be you hahahaha. Damn shame they got rid of the go kart track and all the fun that went with it.
Had an Xb with toploader and went through clutches, a clutch out of a Bronco fixed that. Ya car sounds great!
Thanks mate :) I hope you had fun in your XB. Cheers for the Bronco clutch info, I'll keep it in mind next time around. I do want to change the exhaust to a 3 inch system. I have the mufflers but never got around to it. She sounds good when she is revving and moving, but a little too quite on idle to be honest.
@@VitaminK333 Still have one with a C4, awesome cruiser.
Time to send the s13 over I think
I think you are right :)
Can we get more pov drives of you full sending it. The dose is bloody awsome mate.
Hi mate, thank you. I would love to add some more pov footage, though currently I'm overseas and won't be able to. Sorry
WHAT'S FOR LUNCH!!!
Bro, im thinking about moving to italy because im tired of cars in brazil being so expensive, do you think its a good ideia? Can you give me some advices?
Hi Victor, I think you should do whatever it is that makes you happy. I would defiantly first research the cars that you are after in Italy and see if they are cheaper. Then do some research on how to own a car in Italy because here in Greece, it is very different on how to buy/own a car than it is in Australia. Might help make your decision easier. Whatever you choose to do, just stick to it. Good luck :)
Don’t give up 🔥🔥🔥
Thank you :)
Hope you have a good one/Day
SHREDDINGGGGGG the fps on the camera is so good and smooth this was great, insane control !
The footage is from a gopro hero 8 and the settings are: res/fps -1080/60, lens - linear, hypersmooth - high, low light - off, zoom - 1.0x, clips - off. As for the insane control, I'm not to sure about that hahaha but thank you :)
Nide drifting skills! Is it the 190 hp M52 engine?
Thank you :) I have no idea what power the engine that is in it has. Sorry
Thats my dream ute except I'd like a column auto! I have low standards
Bench seat ute with column auto would be a sweet build. Do it hahaha
Hey man, do you have any issues with valve float at the moment? I’ll be aiming to run around the same boost as you but I plan on doing springs & retainers at the least
Hi mate, didn't have an issue with the car when I was driving it and I did drive it hard for a good month. Currently overseas so I can't tell if it will stay that way hahaha, I'd be doing the springs and retainers just as you are. Like anything with cars sometimes you get the freak cars that nothing goes wrong and then you get the ones that has something new wrong with it every time you touch them. I hope you have some good luck with you build and it all works out well :)
That’s good to hear, and thank you man! Mines been going for 400 odd sets without a service so hopefully she doesn’t give me a bad omen and let go when I do all this work to her 😂
Everyone uses a mig or tig my tig dont like alloy steel i used small 50a stick for my j pipe and flange, for the thick welds i ported with drill flap wheels, took a long time and to port the internal gate mismatched flanges, remember to replace engine mounts and diff bushes to cope with extra 50 kilowatts.
Yeah, once you figure out what material you are going to use for the J pipe, will decide mig or tig for welding. As for the engine mounts they are staying the same for now hahaha. Thank you for the info :)
Man, nice video. Happy to see you own an S13. I had S13 from 2004 to 2008, my favorite car and sadly I had to sell it for financial reasons. The worst decision I had to make. Last 3 years I own a E36 coupe 318is. It's decent for it's price, the cheapest RWD I could find, but cannot compare with S13. Are you Australian living in Greece?
Hello Georgios, Thank you for your kind words. It's a shame that due to financial reasons we need to sell something that we are passionate about or love. I hope one day you get the opportunity to purchase another one. Yes, you are correct. The E36 is well priced for what it is and especially because there are a lot of parts available for this vehicle. Makes drifting less stressful if you damage it. Correct, I have recently just moved here and been here for about 2 months now :)
@@VitaminK333 Welcome to Greece and good luck with your projects!
@@georgiosrigas8094 Thank you :)
what intercooler kit is that? Do you by chance have a link? Love the content
Hi Luke, Thank you :) The intercooler I purchased from Tuners Edge in Coburg Victoria. It's 600x300x76 in Aeroflow brand. The piping kit is a cheapy off eBay. I don't have the link to the one I purchased but I found one that has the same piping angles required to do it the same way as I have. Cheers www.ebay.com.au/itm/195496041195?epid=17013379404&hash=item2d8478daeb:g:VSwAAOSwjUtjSgsZ&amdata=enc%3AAQAIAAAA8PgSHzTuTjywZ3gscbqhk7g%2B%2F3bIEM2cTpvoxFxwhXbH80UtDT0kfl2CpGMVcUbgooEDRZ%2FwzHwQ8bJeqCQkFzz6qGICfX7V7WefRP2ewM0%2FkMTQcnCkfjmCt%2BFqAcKo9Btbs688t%2FmcbibyfMqNJFzHYGzYVyybmAQVg6b8%2BG%2FCUEdN%2FAJgkD%2B2GhVUqGqXSENTap%2FNPTeV%2BN6JlBn%2B8pEcpip23eklYMwSqgFUcLPIbdQzk4K7UyP8Qbm3vT5DGx5%2B%2Fk4BWVPpxoGgJhqqtkQBKHWg3bw9U2UulGXulhEtgGthu8zDB%2B1fXoLBhS%2BBvw%3D%3D%7Ctkp%3ABFBMluWzkoVi
Boss car
Very nice wanna sell her😁
Thank you mate :) I had her for sale just before I moved overseas but clearly took it down. Now she is parked up in a garage with two car covers on hahaha. So if you are serious, then yes she is for sale but in saying that I'm in no need or rush to sell. It would have to be for the right price. Thank you for watching the video. Cheers
@@VitaminK333 how can I contact you
@@pnr9730 you can add me on instagram Vitamink333 and we can talk there. Cheers