Відео

There was a zero bidding war. I had to let it go for the ridiculous price of $2k, which was my opening bid. no reserve. Buyer joked to me at the time he intended to take it into the woods as a beater. No idea if he was serious. I had to sell it to him or have my blemish free Ebay rating besmirched. Big mistake to sell it without a reserve. Very few are interested.

In my video there was a multi-meter. I hoped to communicate that I had first checked power to the board, as well as the inputs to the board. Lid position switch, rotary input switch, etc. Board replacement comes last after eliminating other possibilities. I'm thinking no power, bad input, or you might have two bad boards. Sorry you are having trouble with the machine. Mine still works.

Ouwch!

I'm not an expert because my set up is still working fine since I made the "No Service Mode" video. If you have carefully read the service sheet that comes concealed in the machine, and done everything exactly as it tells you to do, and still no service mode... I guess it is time to get a new circuit board like I did. I just checked online and the circuit board is still available.

After i press paulse and start the ge stackable wont start how to service it? Also change lid switch same thing jam What to do?

Supposed to be a big press conference this Monday at 11:00 AM at Bedford NJ!😀

Would be awesome to be there! Most people get their thrills from skydiving or motorcycles. The Donald gets his from fighting those knuckleheads! He’s the right man for the job!

Agreed!@@soteriamediaproductions6165

Those days are gone, sadly. I too had a bunch of these cars. My fav was a 78 body with a 79 motor. The 78 motor was bad when I got it. Had it for a couple of years, then was rear ended at a stop light. Was only a hard tap, but it totalled the body. The struts were attached to the body with two studs instead of three. The struts were branded DeCarbon in the parts book. The later bodies were fun but they never rode as well as the early car.

Sorry. I bought the bike used with them already on. Try typing into Ebay search "Goldwing cruiser pegs"

@@HamiltonSRink Thanks. I've never done that before. Ha. Jk.

👍

Yes, they were great cars! I've moved on to the Prius. Even better! Less maintenance required, and even better gas mileage!

👍

Why on earth would you come to that conclusion?

Page not found. Did you send the correct link?

WP forks are manually adjustable. Sachs are electronicly adjustable. This bike has electronicly adjusted type.

Stock seat with beaded seat topper. ebay or amazon

👍

Glad you like it! I'm watching intently the Kari Lake AZ governor's race lawsuits. Election Fraud might get to see the light of day. Which could mean that MAGA happens sooner rather than in 2024. She has already shown a problem with signatures not matching!

81 million votes.

What's wrong with the Trump sticker... better than an Obama sticker..

@@teddyches4648 ☺ Much better!

81 million and still lost by 5 million, he is just a common crook

THOSE. " EXTRA " MAIL. IN. BALLOTS , SOME WILL DO. ANYTHING TO REMAIN IN POWER ---- WHATEVER. IT. TAKES & NICE. BIKE , AIRHAWK. SEAT CUSHIONS FOR THOSE. LONG DISTANT RIDES , A. " WING " IS THE THING TO RIDE !!!!!

hi... i have the same model and year... one question... can I change farenhite on Celsius. my is from USA ...thx for response....

@@adamzurek7324 … I’ll have to check but I think you can. Might be a good question to post in one of the GoldWing forums if you are on those

A loose connection where the wire clips onto the starter solenoid is a human error. 2013 Triump Trophy 1200se has no Lucas anything as far as I know.

Thanks for the positive interest. Driving the stick shift was fun and I saw 30 mpg average. Nowadays I have a 2008 Toyota Camry hybrid. A bigger car that is quite smooth and never returns less than 36 mpg average. I paid my mortgage working on Hondas. I'm retired now so I prefer a car that rarely needs attention.

Thanks! You are very kind! I have bird feeders near my kitchen window. This osprey was only about 40 feet away, looking for some easy pickings. Shot with a Lumix FZ2500.

I got mine from rockauto.com. If they offer springs and struts still, I suggest getting the front springs for the civic wagon, and cutting off a little bit. Reason being the car rides a bit mushy. The stiffer wagon springs will help stiffen up the front. You will need to cut a bit off so the front end does not ride too high. I just checked their site. They have springs for the front.

@@HamiltonSRink thank you so much i will look them up , i really appreciated because my shocks are shut i keep u posted

Turns out that the ignition switch wire has an update campaign. Seems that the wire bends quite a bit as the steering is moved left and right. Quite probably your situation. Here in USA, the dealership is responsible to do repairs and reroute the wires from the ignition switch. Consult your nearest dealer for details. Happy New Year!

​@@HamiltonSRink Thanks so much. I also have the right to submit a motorcycle to a dealer. Made an appointment. Hope that may be what's wrong

@@memki2472 let me know how you make out!

@@HamiltonSRink And to you all the best in this New Year

I remember back in the day, a first year Prelude with silver and red interior. Very stunning! The radio was mounted high in the dash with the main knobs right next to each other. As if they redesigned the radio just for the car. I only ever saw one, that one.

@@HamiltonSRink yes that car they didn't make as many as the accord's but yes it too was a very nice looking car as well I just wish they would have made a better carb to put on both like the aftermarket Weber that allot of people are going to but I wish they could make a adapter plate so you could use the stock air cleaner underneath of it

@@ksk101963 Actually, as I was a factory trained Honda tech working flat rate at the local dealership, I had the opportunity to learn what gives with that carb. The carburetor was truly excellent. All carburetors need to be serviced every 5 years or so. The Keihin 3 bore carb is no different. The mixture is quite precise, and if you had a slow leak in the distributor vaccum advance diaphram, or the vaccum controlled bowl vent, or the choke pull off, or anywhere for that matter, it ran poorly. If the customer was a little old lady who thought 24mph was just fine, it would carbon up the auxliary valve. In short, they had their idiosyncracies, but the carb was really well made, and worked well most of the time. The webers were resorted to by those who did not have the patience to learn the Honda way. The webers ran ok, but the emissions were greater than the stock carb and all systems working well. Personally, I liked the Keihin carb.

The car is being sold by the guy I sold it to. New listing. Pheonix Arizona current location.

Alas, yes.

Current owner has relisted the car in Ebay. One day left in the auction.

​@HamiltonSRink you really did the old Accord justice. Owned the same color hatch in 91. Unfortunately our New England wintera destroyed the frame. Fun car, great memories

Parts are hard to find, these days.

What I have has a small hose connected to the outer drum. At the top is a three wire sensor. This is a pressure sensor. When water is in the tub, the water enters the hose and compresses the air above it. As it does, the sensor reads an increase in pressure. That is how the brain (computer) knows that there is water in the tub. If you hear a metallic gear noise as you turn the control knob, you have a timer switch type. No brain, just performs functions one at a time until all the functions are complete. If you have an electrically driven pump that is supposed to empty the tub when the timer tells it to, get a 110v test light and see if the pump has power when it should. If no power, might be a bad timer switch. If power, might be a bad pump. I have seen some types drive the pump mechanically from on top of the main motor. If pump is electric, either bad pump or no power to the pump.

I had parts because I broke cars, and I was a Honda dealership mechanic. Plus, before it became collectable, Ebay was a treasure trove of parts, at very low prices. I do still have a few parts left over. I sold the car, What are you looking for?

Did you enter service mode and retrieve the code?

Hi! Did you fixed it? I have now same problem. Dryer is working but washer doesn't. I already replaced main board and UI board but nothing changed.

Did you figure out what was wrong? having the same problem…

Did you figure out the problem

Perhaps you failed to hear the last few sentences in the video. The car is long gone.

@@HamiltonSRink ya, lol. I sent message before I heard that part...then was like oops. Ill find one when the right one appears. Cheers

@@michaelbaudouin9980 Good Luck!

Thanks!

It has been 3 years or so. Mine was $220.

That works if you try it and there is a change. In my case, there was no change, no life, nothing.

@@HamiltonSRink My first time servicing GE COMBO. I've dealt with many Frigidaire ones - not fun.

That is new information to me. My machine has been working fine since replacement of the board. I have not looked into new board availability since.

@@HamiltonSRink well, at least for my customer's model. And then in short supply. Same when I checked the motor part number. Both sub to a kit including both. Very strange

Since Haier bought GE 5 years ago, much has changed. Parts more difficult to get. Many new appliances are rebranded models from various manufacturers including Samsung and Midea. Haier did have a refrigerator factory in the Carolinas last I checked. And GE used to share a refrigerator factory with LG in Mexico.

@@Jake-by9ly I bet Covid 19 has changed the market too!

They get to be a certain age, and suddenly the many parts on ebay are just gone!

Cool!

Thanks! This pond is just off of an old railroad right of way. The tracks are gone. Mostly bicycles and dirt bikes now a days. A tear drop camper would be nice, but it would block the road. Swamp on the other side. I've lived nearby for last 35 years, only heard the sound once. Lucky to have my camera at the time! Legal camping at nearby Belle Plain State Forest, when the covid passes.