Відео

@@adriancprofiroiu833 are you looking at the right video? 😅 There is no patreon link, I don't use it. And just checked the mega.nz link works fine

Blender 4 is slightly different, please see ua-cam.com/video/CBASNd2qi-w/v-deo.htmlsi=I_PwZiN6aMU6ypJ- I'm using Blender 4 there, and the pin comment has a solution for just this issue

@ your the best ! Really appreciate you.

Yes, that's correct, the second lap. Although there is no HUD, the laptime is visible on the steering wheel - bottom right, the lower laptime is best lap, one above is predicted lap. I don't know, as I've never tried driving with ABS. I would say, if you're having difficulties without ABS, then driving with ABS is probably going to be quicker for you, however if you can manage to brake without it, then you'll probably be quicker without it. Hard to say why you spin when coming off brakes, if it's a sudden spin, it could be that you snag a rear when downshifting, then you can try shifting down with a slight delay. I usually brake hard, after about 0.5s start shifting down and from 7th to 3rd those are fast downshifts, then a slight delay into 2nd, and if needed even longer delay into 1st, to avoid locking the rears. It could also be that you're either braking too much as you're turning in, haven't released the brake enough as you turn in, try braking about 10m sooner and do all the things the same, release as you do and by the time of turn in you should have released more. If that doesn't help, then you can try: - increase the brake migration - increase brake balance i.e. 55:45 to 56:44 - stiffer front suspension - softer rear suspension - lower rear ride height - softer front (slow) rebound damper - softer rear (slow) bump damper In that order, changing one thing at a time in small intervals (1-3 clicks max)

@@LoWreck Thank you very much for brake experience.🥰 Is 3:27's setup suitable for current version? (If there is another bop in season pass or 2024 hy car is a little different from 2023? I drive a 2023 season 963 now.)🤔

@@arl.v39 Difference between 23 and 24 versions are subtle and I don't think setup needs much changes between the two years. What will come after the update tho I don't know. I'm not expecting a huge change, if anything, should make it a bit better under braking.

Le Mans Ultimate mate, name of the sim 🤓 (also, that's still your VR headset 😀)

Hard to tell for sure when watching on YT but how did you find the graphics? I tried it once in VR a few days back and they were REALLY bad. I didn't have time to tweak settings tbf but it seems like they look quite good on this vid

@@tdhitchins I think they're alright. I'm basically running circuit detail on high, all textures and other details on ultra, and everything bellow anisotropic (x16) is set to low, with low post processing as well

@@LoWreck Great, thanks for that info mate. I'll check it out again over the weekend and keep your settings in mind for it 😁

if I remember correctly the SKY GT filter is a bit darker, try the other one. Or search for brightness settings in CM and increase it.

I didn't know that it was missing! I will try to obtain it, however I make no promises.

@ oh thank you 🙏 its ok ill wait i really need that car

Have added the OBJ file and PSD to the video description!

@ THANK YOU OMG 🙏 i will check on it and also i put your videos on my discord as a tutorial template for my community just incase someone play acc there too and im gkad turns out you are nice and helpful so imma keep it there

@@Doomknight86 Awesome mate, thank you!

@@kit3cut tinypedal, can also be added to VR with Crew Chief i.e. I can't say that I have tried that one :)

@@LoWreck thx buddy. crew chief its not running on my lmu:( try the wishky!

@@KnowerofThings yes, that's because of the low resolution of the headset. Setting a higher pixel density improves it a little bit, although it's a very demanding change and it will still not look as good as it does on the flatscreen.

This is explained in the Import livery section of the video, how to load an existing livery template into Blender

@@kevinhunter452 image search on the web, looking for royalty free graphics, etc

They are the same files, only with Blender 4 the legacy format has been removed and you import them as regular Wavefront

@@LoWreck yes thats the problem when I try to import them the folder is empty

@@DownloadCine on le mans you want to have low downforce, and flatter ride height for more speed down the Mulsane, and then fine tune the suspension to have good rotation through Porsche, Karting, and Ford chicanes.

Thank you for the feedback! The video is unfortunately not intended to be a full course of Blender, but merely explain some basics. Maybe I can help you with what you're having issues with? The issue you're describing with selecting specific parts of the 3D object is explained in the video, or if you want a bit more details on custom selection you can head to the follow up video where I go into a bit more detail on selection here: ua-cam.com/video/CBASNd2qi-w/v-deo.html I hope that you will be able to achieve what you are trying to do, and if not, I am more than happy to help.

@@LoWreck I don't really want anything advanced, but what I'm looking for is to do and learn the simple and objective way to paint and place stickers correctly on my skins. Thank you very much.

@@TheOfficialRandomGuy my laptimes are definitely not good laptimes 😅 I've never driven this on the full endurance course but I think you can safely add roughly a minute and 40-50s on top

@@JHull10 it's in the track mod, didn't do anything special, just loaded a race with AI and went to town

@@LoWreck with me it always starts on the same mod it always starts me on the main streight like on a normal track

@@JHull10 did you download the same track that I'm using? It's in the description

@@LoWreck yeah

@@JHull10 there are 2 "layouts" on that track, and one of them is named the "Le Mans start"

It has most definitely changed since this video was created, but it does come with installation instructions

@@MrEDET G2 Reverb has a higher resolution, so that's a difference. I was running this with no issues when not recording, the here or there dip is almost impossible to not have, and when I'm recording, I just sucked it up and went with it, all for a better picture for you guys ❤️

@@LoWreck True, but I lowered my resolution quite a bit to 2800, then use FSR and all kinds of tweaks in ToolkitXR. On top of that I have my CSP settings way lower and disabled a couple of options like GrassFX. It's hard to compare 2 different systems but after seeing your settings I have the feeling that something else is going on on my end, your settings are so much higher. It could also be that the oculus runtime works better in AC than the WMR/OpenVR one which I use..

Also with mine on the Mustang it Has 3 EXT - windows mechanics and something else.

Sorry for a late reply, on the mustang you must make sure to create texture slots on the EXT_Carpaint_Inst

Never had such an issue and couldn't reproduce it. I'd suggest reaching out on a Blender message board

Exactly what i was searching for, thank you

Yes, they can be sketchy, but here was a combination of car setup and driver error. I like to have lift-off-oversteery setups, so that I can get the nose turned in easier when lifting off, and then here proceeded and lifted off too much too aggressively and was too slow to correct it, and it resulted in a snap. If you checkout my latest LMP2 on Spa video, I have the car set up there similarly, oversteery into corners