Відео

usually comes with mortal kombat, I think 2 and 4

It is possible to use them, but with a few caveats. Firstly, however, wireless Xbox controllers work via Bluetooth, and the M8 Game Stick uses non-Bluetooth 2.4 GHz technology for its included controllers. To use a wireless Xbox controller, you'll probably need a USB Bluetooth adapter connected to the M8 Game Stick. Alternatively, you can use a wired Xbox controller by plugging it directly into the M8 Game Stick's USB port, which may work (I don't have an xbox). Some users have reported success using Xbox controllers, but you may need to make some settings on the device: www.reddit.com/r/retrogaming/comments/196vunf/use_xbox_controllers_with_4k_game_stick/

@Play_Screen i see.. thanks for da info

press and hold the “HOME” button on the controller for about 5 seconds. If this doesn't work, look for a small reset button on the controller (usually on the back) and press it with a pin. If the problem persists, try removing the batteries, waiting 30 seconds and reinserting them, if applicable. About the additional controllers: connect the new controller to the Y7 Game Stick via USB or Bluetooth. In the main menu, go to “Settings”. Look for an option such as “Controls” or “Input Devices”. Select “Add new controller” or “Configure controller”. Follow the on-screen instructions to map the buttons on the new controller. If you're just setting up another controller, make sure it's switched on and in pairing mode, go to “Settings” > “Bluetooth” (or similar) on the Y7 Game Stick, select the new controller from the list of available devices and follow the on-screen instructions to complete the pairing

Ordinary alkaline batteries generally last 3 to 5 days with moderate use, but you can also use rechargeable batteries.

In the main menu and using the directional buttons on the controller, navigate until you find the “Settings” option. Within this menu, look for a category called “Sound”, “Audio” or something similar. When you enter this section, you should see options for adjusting the overall system volume, as well as specific settings for the menu sound. Use the buttons on the controller to select and adjust these settings as desired. Generally, there are options to increase or decrease the volume, activate or deactivate the menu sound, and possibly choose between different sound effects for navigation. After making the desired changes, don't forget to save the settings before leaving the menu.

@ Thank you!!

you can play it on the PowKiddy X55, as the console is able to emulate PS1 games with good performance. However, I can't say whether this particular game comes pre-installed on the device's SD card as it varies a lot. In this case, you would need to manually add

@Play_Screen thanks bro

The X5 Pro offers flexibility both for controls and for adding games. A variety of additional controllers can be connected, including PS pads and other compatible controllers, either via USB for wired options or via Bluetooth adapters for wireless controllers. The system supports up to four simultaneous controllers, ideal for multiplayer games. To use a new controller, simply plug it in and configure it in the system options or the specific emulator. As for games, although the console already comes with an external hard drive full of titles, you can add more games as you wish, as long as there is storage space available. To do this, connect the external hard drive to your computer and add the game ROMs to the appropriate folders on the respective systems. In some cases, it may be necessary to update the game lists on the console system.

Talk about being brainwashed by corporate America.....you need serious mental help and help developing critical thinking skills for yourself.....

So is buying Nikes or even seafood, but I do see your point.

That's a misconception of emulation.

@@Sam-m6o3j It's not. Emulators aren't the problem, but the ROMs are copyrighted so you're only allowed to emulate games that you own yourself. If someone sells an emulation box loaded with ROMs they are facilitating large scale infringement for money. I don't care if someone downloads their ROMs for free, but if someone is *selling* copyrighted ROMs they are a criminal.

@@Stoney3K Ah true that:

You can simultaneously press the Select and Start buttons twice, which usually returns you to the main menu. Another option is to press both analog joysticks down at the same time (L3 and R3), opening a menu where you can select the option to exit the game. If these combinations don't work, try accessing the RetroArch in-game menu, where you can also select the option to exit or load other content.

You're right. For a game stick, the best ones go as far as the PSP/saturn, and maybe the game cube, although it's problematic. The Y7 is still considered the best in this field. For ps2, for example, you'd have to go for gaming tv box type devices.

I had a coupon applied but it's very low indeed and I looked at the store in detail and it doesn't seem so reliable, although it was the most relevant, so I removed this link

Certainly the Y7 game stick is more powerful. I made a recent video about it, in case you missed it ua-cam.com/video/xrHswpR6nXg/v-deo.html

Check your TV's audio settings, making sure that the audio output is set correctly for HDMI. If your TV has multiple HDMI inputs, try connecting the X9 Pro to a different port. Also, check that the audio format in the X9 Pro's settings is compatible with your TV - you may need to change to PCM or stereo if your TV doesn't support surround audio formats

A more powerful Game Stick, like this one, goes up to the psp/saturn and can run the gamecube, depending on compatibility (the gamecube is very uncertain). The PS2 is more for another class of device, like a TV box for games

Some previous anbernic devices did have a problem recognizing buttons, such as the RT (r2), so they didn't work in streaming, but here this has been resolved, on the rg cube, at least in the games tested

@ i figured it out you drag the menu down and have controller settings to choose from

To add this game (I think it's a ps1 game) to the card? basically you need to access the card, go to the emulator folder and copy the game (ROM) there. Or have you already done this and gotten an error?

U crazy dawg?

hello, the Y7 is very good, the strongest of this line s.click.aliexpress.com/e/_DFLsz4X

You'll need to format your USB stick to a compatible file system, such as FAT32 or exFAT, if Windows doesn't currently recognize it. Once formatted, you can copy your PSX games (usually in .bin or .iso format) to the appropriate folder on the device, which is usually a folder specifically for PlayStation ROMs. After transferring the games, reconnect the device to the M15 Pro Game Stick. New games may not automatically appear in the main list, but you can usually access them via the system menu or the emulator. Remember that adding too many games or games that are too large can affect the device's performance.

Hello my friend. I usually prefer to “waste” time on something that influences performance in games and in general than on buttons and design, hence the need to explain the computational part, that's what I usually do around here, since it's a gaming device, although I try to balance that, thanks for commenting

yeah, the product isn't even out, yet claiming it to be a review is just shitty

this channel is only AI based content, starting from the voiceover. So sad

The Super Console X3 Cube is an enhanced version of the original X Cube retro games console, offering several significant improvements such as a more powerful Amlogic S905X3 Chip, high-performance GPU and + RAM (4). And this translates into better performance in more demanding 3D games and emulators. I should bring it to the channel soon, although it doesn't have any major changes

the X9 Pro is often compared to more advanced models like the Y7, while the X2 is usually mentioned as a more basic model, so it's more powerful.

Because he just stole the video from Bilibili, that's why