Відео

Nice work

Pretty awsome

If u tension the belts just enough the printhead shouldn't come down. Also when the powers get cut the motors need to cut their current to around 35-50% and then move the printhead straight up by about 5cm and stay there (because at the end of this sequence the steper motors are still energized they will hold the printhead in position so it doesn't fall on the printing part). I've done this on a little monster equiped with duet 1.04 and it worked so it should work also on other boards that support the current reduction in order to reduce the power consumed from the powersupply when the electric current gets cut so you can park the printhead before there isn't any more energy in the powersupply capacitors.

You've got such a friendly, chatty persona, watching your vids feels like having a brew & a chin-wag with a mate, in his workshop! You definitely deserve more subscribers & likes! 🥰❤️

I gotta give you a hand 🤚…. Nicely done…. ❤❤❤

Nicely done…. ❤❤❤❤

Great video. I’m in the process of doing the same thing. LOTS of sanding at the moment!

That looks Amazing :)

If you want this thing to work properly there are quite a few upgrades to do. The Duet 2 is a huge upgrade on them and the smart effector for bed levelling make it work way better.

Could you make me a sand trooper helmet please .thanks kevin.

nice job fella

Awesome! Have you considered car bog “nikky” &/or spray putty before your primer for “those” spots?

Nice video Morgan! Are the wheels on the bottom of the shelf fixed-position? I tried an application similar in theory a while back and got wheels that would rotate when the angle of force changes and they ended up being a headache.

morgan bi gün ölecen köpek kedi kus yılan ve aslan dahil olmak üzere maske bana getirip yeniden doğuş versiyonumu diriltip ben ve askımı sonsuza kadar yaslanmayı tercih edeceğim ve yeni baharlara umut acıp gönüllere gitmeyi alayına tercih olmak üzere kapılarımızı kapatıp benim karım haric tüm cizgidizifilmleri yokedeceğim haberin olsun o gün bugün olmiyacak baska zamn

keep going mate..i enjoyed the video.. what a lecky u are :)).. i got a mate with one of them types of printers if u still aving issues ile tell him to pop up some mesages for the next one.. also he boat stuck because its too low to the bed on the first layers..

Congratulations! I have a tevo Monster.. it’s been converted to klipper .. 48v and AWD.. it’s a amazing printer

Do you have the files for the clear tube print? I'm planning on doing the same

Do Spider-Man

Omg

But it did have a sequel

Hey mate, in terms of using bog, a great replacement for builders bog that is a tonne easier is Blade Putty from Supercheap Auto. its 1 part so no need for mixing and sands super easy. Should make your life a fair bit easier, at least when it comes to sanding :)

morgan great explanation on the train stuff fella. nice wonky curves though . its good that you add in the faults and issues with the builds and the fixes you have,, keep going fella. your doing well plus you make me laugh a fair crack.. cos i deal with these issues too

Dhdhdhdh🎭

Is. That. Real

Thx for the video. Did you firmware update? I have some doubts about upgrading after I saw some User complains their review videos about issues have become after firmware update. What do you think?

Very cool Morgan, can't wait for the next one!

Good job fella... now how about the clone trooper helmet and vader.. I'm working on a terminator arm and alien wall . Will get too the storm trooper soon

Thanks for the video morgan, keep up the good work mate

Very cool! I loved the stormtrooper helmet as well. Do you think you could try a lightsaber hilt?

Love you all

Thank you

We love you all

i laughed alot watching this.. 3d printing is a great thing but it messes our heads up when we ballz stuff up :)

It's so spiky, that game looked fun, but I never got around to playing it. The ball seems perfect to me, when I saw it in the thumbnail I thought it was a real ball you put spikes on, great work.

pOrN

Thanks! Helpful video, and the music was good. Enough to fill the small silences, but not imposing.

Привет Я русский

I’ve vaccuformed and fiberglassed more than a few of these. Purchased aa 3dprinted kit once, and hated it. It melted and deformed a little in my shed. Then it cracked when my mannequin fell. Yes, it’s a ridoncolous pain in the ass. Try doing the armor now. You’ll have deep appreciation for the first imperial detachment guys in the 501st.

superman

Dude that's awesome great work. I hope I'll be able to do stuff like this later, it looks great man.

We need to make this video more popular because this one of the very few videos that shows the entire process on how to make an arduino powered portal gun

Instead of 3d printing the clear tube, you could probably get away with finding a smooth plastic water bottle with the same diameter for a clearer tube.

How did you connect wires to the a led?

Going great with the videos, keep it up

Someone asked for the code I used. Here it is. /* This sketch is a compilation of the FastLED DemoReel and a button press. There are a bunch of mode options to choose from within the sketch. Note: Codebender might not support some parts required by this sketch as the version of FastLED may be out of date. Copy to & upload via Java IDE if you run into this issue. Have fun! */ #include <FastLED.h> #include "colorutils.h" #include "colorpalettes.h" #if defined(FASTLED_VERSION) && (FASTLED_VERSION < 3001000) #warning "Requires FastLED 3.1 or later; check github for latest code." #endif //This is where we adjust things to match our unique project: #define NUM_LEDS 31 // adjust this to the number of LEDs you have: 16 or more #define LED_TYPE WS2812B // adjust this to the type of LEDS. This is for Neopixels #define DATA_PIN 6 // adjust this to the pin you've connected your LEDs to #define BRIGHTNESS 45 // 255 is full brightness, 128 is half, 32 is an eighth. #define SATURATION 255 // 0-255, 0 is pure white, 255 is fully saturated color #define BUTTON_PIN 2 // Connect the button to GND and one of the pins. #define UPDATES_PER_SECOND 100 #define COLOR_ORDER GRB // Try mixing up the letters (RGB, GBR, BRG, etc) for a whole new world of color combinations #define NUM_MODES 4 //Update this number to the highest number of "cases" uint8_t gHue = 0; // rotating "base color" used by many of the patterns uint16_t STEPS = 30; // STEPS set dynamically once we've started up uint16_t SPEED = 30; // SPEED set dynamically once we've started up CRGB leds[NUM_LEDS]; CRGBPalette16 currentPalette; TBlendType currentBlending; int ledMode = 0; const TProgmemPalette16 MyColors_p PROGMEM = { CRGB:: DarkBlue, CRGB:: HotPink, CRGB:: Teal, CRGB:: BlueViolet, CRGB:: DodgerBlue, CRGB:: DeepPink, CRGB:: Turquoise, CRGB:: Indigo, CRGB:: DarkBlue, CRGB:: HotPink, CRGB:: Teal, CRGB:: BlueViolet, CRGB:: DodgerBlue, CRGB:: DeepPink, CRGB:: Turquoise, CRGB:: Indigo, }; byte prevKeyState = HIGH; // button is active low //------------------SETUP------------------ void setup() { delay( 2000 ); // power-up safety delay FastLED.addLeds<LED_TYPE,DATA_PIN,COLOR_ORDER>(leds, NUM_LEDS).setCorrection(TypicalLEDStrip); FastLED.setBrightness(BRIGHTNESS); currentBlending; pinMode(BUTTON_PIN, INPUT_PULLUP); } //------------------MAIN LOOP------------------ void loop() { byte currKeyState = digitalRead(BUTTON_PIN); if ((prevKeyState == LOW) && (currKeyState == HIGH)) { shortKeyPress(); } prevKeyState = currKeyState; static uint8_t startIndex = 0; startIndex = startIndex + 20; /* motion speed */ switch (ledMode) { /*Here are the mode options. Paste these lines into the below to choose. Only 4-5 will fit. * case X: rainbow(); break; * case X: confetti(); break; * case X: sinelon(); break; * case X: rainbowWithGlitter(); break; * case X: juggle(); break; */ case 0: confettiA(); break; case 1: confettiB(); break; case 2: confettiC(); break; case 3: confettiD(); break; case 4: confettiE(); break; // case 5: confettiF(); break; // case 6: confettiG(); break; } FastLED.show(); FastLED.delay(1000 / SPEED); //EVERY_N_MILLISECONDS( 20 ) { gHue++; } // slowly cycle the "base color" through the rainbow } //------------------Button Press Setup------------------ void shortKeyPress() { ledMode++; if (ledMode > NUM_MODES){ ledMode=0; } } void confettiA() { // random colored speckles that blink in and fade smoothly fadeToBlackBy( leds, NUM_LEDS, 10); int pos = random16(NUM_LEDS); leds[pos] += CHSV( 50 , 255, BRIGHTNESS*5); //Adjusted Brightness with variable } void confettiB() { // random colored speckles that blink in and fade smoothly fadeToBlackBy( leds, NUM_LEDS, 10); int pos = random16(NUM_LEDS); leds[pos] += CHSV( 150 , 255, BRIGHTNESS*5); //Adjusted Brightness with variable } void confettiC() { // random colored speckles that blink in and fade smoothly fadeToBlackBy( leds, NUM_LEDS, 10); int pos = random16(NUM_LEDS); leds[pos] += CHSV( 50 , 255, BRIGHTNESS*5); //Adjusted Brightness with variable } void confettiD() { // random colored speckles that blink in and fade smoothly fadeToBlackBy( leds, NUM_LEDS, 10); int pos = random16(NUM_LEDS); leds[pos] += CHSV( 150 , 255, BRIGHTNESS*5); //Adjusted Brightness with variable } void confettiE() { // random colored speckles that blink in and fade smoothly fadeToBlackBy( leds, NUM_LEDS, 10); int pos = random16(NUM_LEDS); leds[pos] += CHSV( 0, 255, BRIGHTNESS*0); //Adjusted Brightness with variable } //void confettiF() //{ // random colored speckles that blink in and fade smoothly // fadeToBlackBy( leds, NUM_LEDS, 10); // int pos = random16(NUM_LEDS); // leds[pos] += CHSV( 200, 255, BRIGHTNESS*5); //Adjusted Brightness with variable //}

I was looking at one of these on the weekend. A customer at my Strawberry Patch very kindly showed me a couple of it’s features as I’m concerned about carbon fuels & am looking to update to hybrid myself. Thank you for this informative review. You also brought back some memories of during a move my trailer unhitched itself right on that very speed hump. Which also makes this review a little freaky as you look very similar to my friend who was with me when the trailer unhitched. Anyhow, back to the Strawberries. Regards.

𝘱𝘳𝘰𝘮𝘰𝘴𝘮 🎊

The whole build plate fits inside of the wash bucket. Just turn it upside down and it fits into supports on the metal cage. You can wash the model and the build plate at the same time.