- 7
- 20 301
Browzzrr Builds
Canada
Приєднався 23 бер 2024
Bowzzrr Builds! 3d Printing with Voron Focused Content
Formbot Micron Plus Build: Final Steps
Toolhead, Wiring and first prints for my micron plus build!
Disclosure: The kit was provided to me at a slight discount by Formbot, at my request. My opinions are my own however.
Feel like supporting the channel or looking for a new Voron?
Formbot Affiliate link below!
www.formbot3d.com/?DIST=Rk5DFV0%3D
Canbus guide:
canbus.esoterical.online
Klicky:
github.com/jlas1/Klicky-Probe
Spool Holder:
www.printables.com/model/500221-voron-spool-holder-608-bearings
Documentation used in this series:
github.com/PrintersForAnts/Micron
www.printables.com/model/738609-formbot-micron-180-tips-and-tricks
github.com/zruncho3d/ZeroPanels
Music:
Tropical Soul by Luke Bergs
Luke Bergs & Waesto - Follow The Sun
Luke Bergs & Balynt - Give It a Try
Island by Luke Bergs
Check out the musician
soundcloud.com/bergscloud/
Disclosure: The kit was provided to me at a slight discount by Formbot, at my request. My opinions are my own however.
Feel like supporting the channel or looking for a new Voron?
Formbot Affiliate link below!
www.formbot3d.com/?DIST=Rk5DFV0%3D
Canbus guide:
canbus.esoterical.online
Klicky:
github.com/jlas1/Klicky-Probe
Spool Holder:
www.printables.com/model/500221-voron-spool-holder-608-bearings
Documentation used in this series:
github.com/PrintersForAnts/Micron
www.printables.com/model/738609-formbot-micron-180-tips-and-tricks
github.com/zruncho3d/ZeroPanels
Music:
Tropical Soul by Luke Bergs
Luke Bergs & Waesto - Follow The Sun
Luke Bergs & Balynt - Give It a Try
Island by Luke Bergs
Check out the musician
soundcloud.com/bergscloud/
Переглядів: 1 549
Відео
Formbot Micron Plus Build: Gantry and Belts
Переглядів 8862 місяці тому
Gantry Assembly and Z-Belt run-through for my micron plus build! Disclosure: The kit was provided to me at a slight discount by Formbot, at my request. My opinions are my own however. Feel like supporting the channel or looking for a new Voron? Formbot Affiliate link below! www.formbot3d.com/?DIST=Rk5DFV0= Documentation used in this series: github.com/PrintersForAnts/Micron www.printables.com/m...
Formbot Micron Plus Build: Z drives, Idlers and Plate
Переглядів 5722 місяці тому
Z Assembly and build plate run-through for my micron plus build! Disclosure: The kit was provided to me at a slight discount by Formbot, at my request. My opinions are my own however. Feel like supporting the channel or looking for a new Voron? Formbot Affiliate link below! www.formbot3d.com/?DIST=Rk5DFV0= Documentation used in this series: github.com/PrintersForAnts/Micron www.printables.com/m...
Formbot Micron Plus Build: Frame Assembly
Переглядів 7492 місяці тому
Frame assembly run-through for my micron plus build! Disclosure: The kit was provided to me at a slight discount by formbot, at my request. My opinions are my own however. Feel like supporting the channel or looking for a new Voron? Formbot Affiliate link below! www.formbot3d.com/?DIST=Rk5DFV0= Documentation used in this series: github.com/PrintersForAnts/Micron www.printables.com/model/738609-...
Print Apnea No More! Custom Voron 2.4 CPAP Cooling
Переглядів 4,9 тис.3 місяці тому
Print Apnea No More! Custom Voron 2.4 CPAP Cooling A quick upgrade video of my formbot Voron 2.4, many more to come! I've always wanted CPAP cooling, here it is! Feel like supporting the channel or looking for a new Voron? Formbot Affiliate link below! www.formbot3d.com/?DIST=Rk5DFV0= Flaigenstool Engineering: www.printables.com/@Flaigenstool_1947822 Buy them a Coffee as a thanks for this sweet...
Voron 2.4 Upgrade Part 2. Time to (Pin) Mod!
Переглядів 2,5 тис.3 місяці тому
Voron 2.4 Formbot kit Gantry overhaul and quality of life upgrades! Feel like supporting the channel or looking for a new Voron? Formbot Affiliate link below! www.formbot3d.com/?DIST=Rk5DFV0= Links to the mods: GE5C: mods.vorondesign.com/details/eB5T2RNQcYI4o6cilhpXEg BZI/BFI: github.com/clee/VoronBFI BFI Sync gears: github.com/Diyshift/3D-Printer/tree/main/BFI Gears Cable Channels: www.printab...
Should you buy a Voron in 2024? I did! Let's upgrade it.
Переглядів 9 тис.4 місяці тому
Quick overview of my Formbot Voron 2.4, as well as current and future upgrades! Feel like supporting the channel or looking for a new Voron? Formbot Affiliate link below! www.formbot3d.com/?DIST=Rk5DFV0= Links to the mods: Panel latches: www.printables.com/model/172368-voron-24-filament-latch-or-any-2020-extrusion Lift off hinges: www.printables.com/model/302551-lift-off-hinges-for-voron-triden...
Nice build, really neat. Question, is the cpap basically a PWM blower fan?
Which files for the pg7 or pg9 mounts that you have?
I love those mods, will prolly do them as well when I get my Voron. Thanks! And the dual color is really nice
Jesus what a sick build
Awesome video.
Nice video! Assembling one right now and this video helped a bunch between Micron documents and Formbot differences. Where did you find the EBB36 mount/Can wire strain relief bracket? Can't find one with connecting to Klicky mount. Did you have to make custom?
message me on discord! ill send you the STL's (I'm the voron discord, formbot discord and doomcube discord)
@@Browzzrr great thanks
Thanks for covering the Micron+ ! It looks like the manual is pretty well polished at this point. What are those red metal angles called by the way? Looks like a great way to align extrusions.
Just some cheap machinist squares off Amazon!
So I have a v2.4 350mm, would you go v0.2 or micron+ for next build? I really want to go micron+ esp for 180mm, but for some reason I like the idea of v0.2 as just different from v2.4, but still love flying gantry. Porque no los dos?!
I planned on going v0 after micron I no longer want a v0, the micron is so great!
@@Browzzrr glad to hear it! I think you’ve help me make a decision, thanks!
Something is loose or not rigid in the gantry. I've seen input shapers with zv over 28k accel with their formbot kits. Have you gone through and checked this?
Great Work! Don't know if you might be interested in a YT video collab. (PCBWayDaisy)
I'll send you an email!
@@Browzzrr cool thing. :P
If I want to mimic this exact color scheme, is it obvious on which parts to print teal and which to print purple or is it pretty custom design not easily replicated?
I did opposing parts in one of each Top right xy joint purple means bottom left is purple (etc) then on parts like the screen holder you only have 2 pieces, so one of each
@@Browzzrr Sounds simple enough, thank you :)
really nice fucking build... well done
niceeeee thanks for all your ideos on this build
you say you added or subtracted wait
I don't quite follow?
Mind altering colors. Great build.
That printer really said "We live in a society" 🤡 subscribed
It looks amazing! :D Good work! :D
Thanks a bunch :)
Cool video, looks good! Just finished my Formbot micron+ and did have some bumps on the way, partly due to the "workbench" (cough*, very old and wobbly Ikea table) I'm using not being square. Did your kit come with the 180mm gantry beam for the AB drives? My kit had 190, but 180 was specified, so I ended up building it with the older gantry and later cut it to fit the new one. Also you might find this interesting. If you use some standard M3 standoffs, nylon or brass you can mount a beacon/IDM/etc scanner directly to the x carriage. I use 20mm for mine, with Phaetus XG. Might have to try out the BZI idlers, already run BFI. Keep up the good work
Thanks for the video and the links to the mods. I found a few things I didn't know I needed.
Glad it helped!
Great videos inspiring me to mod my voron too! Would be nice if you explained in more detail what benefits each part actually brings while you install them 😊
I plan on doing so in the future!
That color scheme is dope as fck 💥
what is your kit? ldo? formbot?
Formbot!
@@Browzzrr How did the inputs shaoper come out on both axes?
@@bubajou I get about 9k on x and 4.3k on Y, cleanest graphs I've seen on a 2.4 350
I find that 100% CPAP cooling is too much. I rarely go above 50%. It's just so much better than a toolhead mounted fan.
Yeah I run 90% on heavy PLA overhangs Usually 20-50% for anything else
Hi mate, what filament did you use for your printed parts?
Polymaker ASA!
@@Browzzrr nice colors, can spot its yours for a mile away.. once again thanks for the video.
Nice work keep up the good, I like the no nonsense approach. Some UA-cams would make 5 videos about each step.. it would be interesting to see a an as bull BOM form each stage. I feel like some people would gain a lot by self sourcing.. the 2.4 almost needs a r3… with some of these mods straight away..
I will look into adding a bom!
Thanks very helpful
i think mammoth is a bit better
Mammoth is three times the size. Plus most of the noise comes from the air coming out at the hotend. A bigger muffler wouldn't do anything.
@@Browzzrr you use spool behind, mammoth has the same depth as a roll on the back
It's bulky and wouldn't change the noise levels at the toolhead, I'm happy with the one I have
this swags HARD 🔥🔥🔥🔥🔥🔥🔥
Built a 2.4 in 2020. Now its time to upgrade an mod 🎉
what changes are you going to make?
@@Browzzrr having researched the mods I think I’m going to sell the 2.4 and built a new one. I want to have stealthchanger and therefore need to rebuild half the gantry and upgrade to a new board. For now I will upgrade the hinges add The Filter and print parts for a v0.2 built
@@danifem sell to build again? A new board can't be that bad, and gantry rebuilds are mostly printed parts no?
what hex tray is that?
www.thingiverse.com/thing:5569567/files
micronpenis is this anything
Amazing, still have no idea what a pin mod is!
If you're genuinely curious I'm happy to explain!
@@Browzzrr Yes please! Subscribed :)
@dezent so the x/y joints (that carry the x beam on the y rails) and the a/b motor mounts use bearing stacks and idler for the belts They are held in place with m5 bolts and nuts stock, but if overtightened they bind, or too loose they cause bad Input shaping graphs from too much play. The pin mod replaces those m5 bolts with pins so that you remove the risk of them binding or having too much play!
@@Browzzrr Built my V2.4 LDO kit two weeks ago and right now it prints beautifully so I don’t want to break anything but I googled it quickly and made some bookmarks for future upgrades. Thank you!
@@Browzzrr Damn you! got the pins ordered and printing the parts now :)
A micron is next on my build list!
Great Choice! really a fun build so far
I might have missed it in the video but what filament were you benchmarking with?
Sunlu PLA Meta!
Hello, I have to give a big compliment to your beautiful videos / explanations / presentations of the Vorons and now also Micron. You rarely see that on UA-cam. Greeting
thank you!
its not micron its boyfriend sized
😂😂😂😂😂
Watermelon flavored??
The best flavour of FDM!
Very nice! Quick question since I recently got in a linear rail: is it really necessary to clean off the shipping grease? Just curious what the benefits of doing that are
100% the shipping oil isn't a lubricant for motion, its to prevent rust while in storage. the grease is designed for long term use, I would recommend using the Voron spec EP2 grease, lots of 3d printing sites sell small syringes cheap
@@Browzzrr Thanks for the response, I already got some EP1, should that also be fine? Also, on rewatches I noticed you applying some blue stuff to some of the screws, was that blue threadlock?
@@WarriorServent009 yep blue threadlocker for the frame, never near ABS/ASA as it will degrade it, EP1 is also recommended!
Great video again, but tell me again how many faces does a cube (or rectangular prism in this case) have? 😂
did i say 8 🤦♂
this swags hard 🤖
the micron seems like a great printer
can't wait to find out!
I stumbled upon your channel yesterday, great stuff dude! Exactly the content i was looking for.
Awesome! Welcome aboard
YO people don't forget to like and subscribe.
Thanks man!
Epic
Thnx m8 for this Topic ; please give a sneak when i can expect the next part ? :)
Already filmed, editing part 2 this weekend :)
@@Browzzrr Great ; waiting for an answer from Formbot then i will order mine ; your affiliate link will be taken into account 👍
@@jimwhite4482 before ordering a micron, be aware that the manual isn't complete yet for the micron plus. (that being said there's an active discord community) and we're here to help!
@@Browzzrr Yes incomplete manual for Micron(+) i know. My decision is to go with the 2.4 250x250 first. i think this is a good bang for the buck.
@@jimwhite4482 I'm in the voron discord under the same name! feel free to ping me if you have any issues!
Alt tabbed off of my anime for this and I get slapped in the face with sponsored content? Good job getting the bag tho, keep the vids pumping tiger
Really great stuff! I look forward to your next video!!
´can't wait for the Micon Stuff because of your quality videos! - Please keep going !
First Micron Video should be up tomorrow!
@@Browzzrr I am a bit unsure where to start - with Micron or 2.4 I like the Micron because of optics & mods & tiny - But to be more rational i might go with 2.4 (first).... argh :)
@@jimwhite4482 if you have never built a printer before, the trident is the easiest! if you really want the flying gantry, the 2.4 is also excellent, just a bit more challenging
@@Browzzrr I assembled an Anet A8 approx 7 Years ago and modded with alu profile case due to the lack of stock stiffnes etc. It is still working btw. I am familiar with raspberry pi, arduino, electronic and tinkering things. 2 Months ago i bought the Creality K1 and now i want to get back in. I guess it is only a matter of time that i own more then just one Voron. I am just struggeling where to start with ; for now i want them all :)
@@jimwhite4482 I have the same problem! 2.4 or Trident is your best starting point.
Dude, after ich watching your videos i am 5min to go before i order my 1st Voron Kit. Please don´t stop the music and produce more of this fantastic videos, please. Thank you very much mate
thanks for the support! If you decide to go with formbot, be sure to use my link!
bro. sick forearms. sick video.
thanks man! a lot of hard work and a lot of hard work went into the making of both :P