![masaselection](/img/default-banner.jpg)
- 30
- 103 351
masaselection
Japan
Приєднався 30 гру 2006
oil change MR41S suzuki HUSTLER 21.08.24.
Thanks for watching.
Record my cars here.
Please subscribe to the channel.
I hope it will be helpful for your work.
2018 mr41s suzuki hustler.
oil and oil filter change movie.
pennzoil 5w-30.
Amount of oil 2.8liter
exchange in 6 months.
Tightening torque information...
oil filter 10Nm
Drain bolt 40Nm
Record my cars here.
Please subscribe to the channel.
I hope it will be helpful for your work.
2018 mr41s suzuki hustler.
oil and oil filter change movie.
pennzoil 5w-30.
Amount of oil 2.8liter
exchange in 6 months.
Tightening torque information...
oil filter 10Nm
Drain bolt 40Nm
Переглядів: 1 311
Відео
Tamiya 1/10 RC car DT-02. night run at on the grass!
Переглядів 813 роки тому
Thanks for watching. This is a video of ... Tamiya 1/10 RC car The Glass Popper II Tamiya 1/10 RC car DT-02 running. It's a record for myself, but I hope everyone enjoys it. Please enjoy the difference in movement between Grasshopper II and DT-02. The Glass Popper II 〇moter:tamiya Brushless motor 16T 〇ESC:tamiya TBLE-02S 〇tire:genuine 〇Suspension and damper front:Low friction damper-TA03F(genu...
Hopping the grass with two cars.tamiya RC car grasshopperⅡ and TT-02B.
Переглядів 1263 роки тому
Thanks for watching. This is a video of ... Tamiya 1/10 RC car The Glass Popper II Tamiya 1/10 RC car TT-02B running. It's a record for myself, but I hope everyone enjoys it. Please enjoy the difference in movement between Grasshopper II and TT-02B. The Glass Popper II 〇moter:tamiya Brushless motor 16T 〇ESC:tamiya TBLE-02S 〇tire:genuine 〇Suspension and damper front:Low friction damper-TA03F(ge...
cbr900rr fireblade sc33-T(1996) oil change and filter change. june,21 2021.
Переглядів 17 тис.3 роки тому
Thanks for watching. Record my motorcycles here. Please subscribe to the channel. This time, the service data was displayed in the video. 1996 sc33 cbr900rr fireblade oil change movie. Honda genuine ULTRA G2 SL 10W-40. exchange in 6 months. #cbr #cbr900rr #sc33 #oil change #filter change #Garage Life #garage #maintenance
i`m hopping grass! tamiya RC car grasshopperⅡ
Переглядів 903 роки тому
Thanks for watching. This is a video of Tamiya 1/10 RC car The Glass Popper II running. It's a record for myself, but I hope everyone enjoys it. Enjoy the unique driving of The Glass Popper II with sound and movement. 〇moter:23T 〇ESC:futaba MC331CR 〇tire:genuine 〇Suspension and damper front:Low friction damper-TA03F(genuine)Spring rear:SP-520 C.V.A. Damper Short (II)-softSpring
oil change Honda cr-v 3rd gen re-4.2021.06.
Переглядів 1,2 тис.3 роки тому
Thanks for watching. Record my cars here. Please subscribe to the channel. 2007 re-4 cr-v oil and oil filter change movie. castrol GTx 10w-30. exchange in 6 months.
tamiya 1/10 rc car terra scorcher. in my garage.
Переглядів 1203 роки тому
Thanks for watching. Record my rc car here. Please subscribe to the channel. tamiya 1/10 rc car terra scorcher. It is one of my favorite RC cars.
1996 cbr900rr fireblade sc33. front fork remove.
Переглядів 12 тис.3 роки тому
Thanks for watching. Record my motorcycles here. Please subscribe to the channel. 1996 sc33 cbr900rr fireblade front fork remove. For the first time, I disassembled the front fork myself. It's easier to assemble. I would like to continue to enjoy maintenance.
tamiya 1/10 rc car thundershot assembly time lapse.
Переглядів 823 роки тому
Thanks for watching. Record my rc car here. Please subscribe to the channel. tamiya 1/10 rc car thundershot! assembly time lapse movie.oh yeah! I like theassenbly and disassembly work. :D
tamiya 1/10 rc car thundershot disassembly time lapse.
Переглядів 383 роки тому
Thanks for watching. Record my rc car here. Please subscribe to the channel. tamiya 1/10 rc car thundershot! disassembly time lapse movie. I like theassenbly and disassembly work. :D
1996 cbr900rr fireblade sc33 fork and tire installation.
Переглядів 3,4 тис.3 роки тому
Thanks for watching. Record my motorcycles here. Please subscribe to the channel. 1996 sc33 cbr900rr fireblade fork and tire installation movie. I like the installation work.
masaselections man cave 01. CBR900RR SV400S in the garage.
Переглядів 1,2 тис.4 роки тому
Thanks for watching. Record my motorcycles here. :D This is my "Man Cave". It's not that wide, but In this garage, disassemble the motorcycle etc. I have a good time here.
Honda cr-v 3rd gen RE4 power steering fluid dilution exchange.
Переглядів 4464 роки тому
Thanks for watching. Record my motorcycles here. :D Car:Honda 2008 RE4 CR-V PSFoil:Honda genuine 500cc Replacement interval:6 months.
oil change. 1998 suzuki sv400s vk53 (オイル交換)
Переглядів 1224 роки тому
Thanks for watching. Record my motorcycles here. 1998 suzuki sv400s vk53a oil change movie. castrol power1 10w-50. exchange in 6 months.
cbr900rr fireblade sc33. (sc33-T 1996) oil change.
Переглядів 23 тис.4 роки тому
Thanks for watching. Record my motorcycles here. Please subscribe to the channel. 1996 sc33 cbr900rr fireblade oil change movie. castrol power1 10w-50. exchange in 6 months. #cbr #cbr900rr #sc33 #oil change #filter change #Garage Life #garage #maintenance
cbr900rr fireblade sc33. (sc33-T 1996) choke start.
Переглядів 14 тис.4 роки тому
cbr900rr fireblade sc33. (sc33-T 1996) choke start.
suzuki sv400s 1998 vk53a engine sound.
Переглядів 5414 роки тому
suzuki sv400s 1998 vk53a engine sound.
Honda RE4 CR-V 3rd gen Air filter element inspection and replacement.
Переглядів 3274 роки тому
Honda RE4 CR-V 3rd gen Air filter element inspection and replacement.
cbr900rr fireblade 1996 sc33 engine sound.
Переглядів 8 тис.4 роки тому
cbr900rr fireblade 1996 sc33 engine sound.
東京マルイ tokyomarui 電動ガンBOYs H&K G36C マガジン分解・整備
Переглядів 2,1 тис.7 років тому
東京マルイ tokyomarui 電動ガンBOYs H&K G36C マガジン分解・整備
Wii U - Mario Kart 8 - ワリオスノーマウンテン-ゴール前必見
Переглядів 3910 років тому
Wii U - Mario Kart 8 - ワリオスノーマウンテン-ゴール前必見
masaselection vol.7 tourer report 2013
Переглядів 4010 років тому
masaselection vol.7 tourer report 2013
masaselection vol.6 cancel exhaust device. (VFR1200F)
Переглядів 22211 років тому
masaselection vol.6 cancel exhaust device. (VFR1200F)
masaselection vol.5 tourer-report 2012-2013
Переглядів 3911 років тому
masaselection vol.5 tourer-report 2012-2013
masaselection vol.4 model factory 2011-2012
Переглядів 5411 років тому
masaselection vol.4 model factory 2011-2012
Your CBR looks brand new !
Always prime new oil filter
Thanks for your comment! I always change to a new oil filter.
역사상 최고의 스포츠바이크로 꼽고 싶음
Thanks for the comment! Enjoy your motoring.
Eu tenho uma CB 500 2002 Q penso ser a filha ou irma mais niva da Cbr 900 Ambas são parecidas A rabeta larga e linda O tanque nem se fala..um colirio para os olhos esse design Ainda vou ter uma dessas Maquina pura, carburada Você e ela na estrada Sensação raiz...diferente Ja tive cbr 600rr 07 e cbr 954 Mas eu adoro essa 900 sc33
Obrigado pelo comentário! Produzida nos anos 90 e não nas motas mais recentes. A última geração com motores carburados agrada-me. Também gosta muito de motas. Desfrute dos seus dias.
@@masa5404s É isso aí meu irmão. Eu que agradeço. As máquinas dos anos de 90 a 2000 são espetaculares. Últimas carburadas e primeiras injetadas. Alguns não gostam das primeiras injetadas. Mas eu tive duas das primeiras, a cbr 600 f41 2001, primeira 600 injetada e a cbr 954, segunda geração da Blade injetada. Não é ruim. A Honda soube trabalhar bem nessas injeções desde o início. Até porque a Honda já usava a PGM-FI na fórmula 1, e outras aplicações há muito tempo. Mas os carburadores têm algo de especial que não tem nas motos com injeções eletrônicas. É algo sobre o barulho, o cheiro, a sensação é outra mesmo. É uma maravilha carburadores regulados e funcionando bem. Uma outra moto que não cite é a Cbr 1100 XX. Também acho uma máquina fantástica. Abração
Який рр, зірочка не на швидкість, труба закрашена бітум-грунтовка, скоріше іржаво-жарена!!! Нема чим хвалитись!!!
Дякуємо за ваш коментар! Цей SC33 був виготовлений в Японії (Кумамото). Однак продавався і використовувався в Європі. Ми хочемо увібрати в себе спогади попереднього власника і зберегти історію. І ми використовуємо його з великою обережністю. Поки що проблем з двигуном чи трансмісією немає. Найголовніше - дарувати йому любов. Ремонт завжди можна зробити. Подряпини на екстер'єрі - це частина цього SC33. Насолоджуйтесь життям автомобіля зі спокійною душею.
Superb video. As clear is it could ever be. Thank you.
Thanks for the comment! Enjoy your motorcycle life!
is this supposed to be oil change asmr??
Thanks for the comment! I just personally enjoy changing the oil. Enjoy your motorcycle life.
La caja de velocidad tiene aceite o funciona con el aceite del motor? Tengo un cbr 900 hace poco tiempo y no se dónde revisar el aceite de la caja de velocidad. Saludos desde Neuquén Patagonia Argentina
Gracias por su comentario. La CBR900RR guarda el aceite del motor y el del cambio en una caja común. Esto significa que cuando se cambia el aceite del motor, también se cambia el aceite del engranaje de transmisión. Puedes comprobar la cantidad y el estado del aceite a través de una pequeña ventana en el lado derecho del chasis, debajo del motor. Disfrute de su vida automovilística.
Thanks for the vid, I'm off to oil change my '98 CBR900RR. Your bike looks in beautiful condition. Cheers bro
Thanks for the comment! The '98 is a cool model too! There aren't many motorcycles with 16" front tires, are there? But that's what I like about it. Enjoy your motorcycle life! Dude!
Beautiful ❤
Thanks for the comment! It's very nice to get compliments, isn't it? I hope to continue to enjoy the motor cycle life!
@@masa5404s Yes it is. Thankyou very much
Very nice bike! I am thinking to get one ,just for project bike. Does it worth it? Or there is something better out there?
Thanks for the comment! The CBR919RR SC33 is one of the best 90's motorcycles. However, parts are hard to find nowadays. I would love to have another one as a donor. I personally like carburetor motorcycles. I think it depends on the individual whether it is suitable as a hobby or not. Enjoy your motorcycle life! Let's talk again!
Your video should be called fork, disassembly, not fork removal.
Thanks for the comment! I agree with your opinion. Keep enjoying the variety of videos.
just got me the same Blade lately, will do an oilchange tomorrow!
Thanks for the comment! Wow! That's a great motorcycle you got there! Keep safe and enjoy your motorcycle life. Please show us your Fireblade when you get a chance.
Great video, I am doing mine and want to replace all of the rubber seals and bushings. When you looked down the fork slider (bottom portion), what you can see is the oil lock piece which has a rubber seal. That you should remove, somehow, and replace the rubber seal. I am trying to figure out how to remove the oil lock piece. Let me know if you did, thanks.
I turned a special tool for this on the lathe. A 35mm thick POM rod with a cone at the end that tapers to 28.5mm. I then ground a cross into the cone to make it a little flexible. The rod is about 350-400mm long and is then hammered into the Hydrostop with a plastic hammer. By wiggling it back and forth a little, the hydrostop loosens and can be pulled out carefully. You have to be very careful not to scratch the anodised layer of the outer tube.
Thanks for the comment! This video omits the process of loosening the oil lock piece, but I used an unusual method. This method is to loosen the bottom bolt with an electric impact drill before disassembling the front forks. Here you just loosen it. If oil spills out, don't worry about it, just lightly retighten. Next, loosen the top cap.Again, just loosen it. After that process, I removed the fork from the top bridge. Then it is time to change the oil. You can tighten the bolts to the specified torque even after putting them back on the body. Good luck!
@@masa5404s You just get the Cartridge and not the oil lock piece. Under it is the most dirt and it needs to be removed. Otherwise your new oil will be contaminated instantly
@@Wilhelm147 Roger that! I will refer to this for future oil changes!
Love the old blades. I've just reviewed a 1992 original blade and loved how it felt compared to my 954.
Thanks for the comment! It's a little older motorcycle, but it's the 90's motorcycle that fits my feel. Please comment again.
That oil you are draining looks brand new, I would put it back in and keep using it.
Thanks for the comment. Oil changes are a pleasure for me. I often change it earlier than the proper time to change it. Enjoy your motorcycle life.
how much fork oil?
Thanks for the comment. Please see the service manual for exact quantities. I put in the proper amount. Still, no problem at all. Enjoy your motorcycle life.
The SC33 has a air cushion of 114mm +-4mm. I would recommand 110mm if you want a little bit harder suspension.
@@Wilhelm147 Roger that! I will refer to this for future oil changes!
Does the 96 have a air filter?
Thanks for the comment. There should still be a filter that fits the 96. Enjoy your motorcycle life.
Nice video. What's brand of the gearbox oil and its volume?
Thanks for the comment! The oil brand is Castrol. The product name is Power One Racing 10W-50. The replacement quantity is 3.8 US qt. Enjoy your motorcycle.
I'm sorry. I mistook it for a motorcycle question. The oil is Pennzoil, 5W-30. Enjoy your oil change.
Lindas motos, você tem uma CBR900rr e uma TL1000s? Eu tenho uma CBR900rr 98 e também tenho uma TL1000s além de outras, mas legal você ter essas, parabéns
Obrigado pelo seu comentário! A CBR900RR tem um encanto que as motos modernas não têm. Também gosta de motociclismo. Gosto de manter e conduzir a minha mota dos anos 90. Por favor, comente novamente. Desfrute da sua motocicleta.
猫目が大好きでした✨
Cracking bike 👌🧡
Thanks for the comment! Thanks! Enjoy your motorcycle life.
Nice video. Can I ask what is the number on the muffler next to SANKEI?
Thanks for the comment. This muffler is genuine from the manufacturer. You can look for the part number in the parts list. Enjoy your motorcycle life!
@@masa5404s Yeah I already have the part number. I just wish to know what 4 numbers are next to SANKEI on the muffler.
@@kingkire1556 Roger! The numbers next to SANKEI seem to be the numbers for the parts used as the factory mufflers for the '96 and '97 models. Different numbers may be stamped on some lots. Please use it as a reference.
Do you still have this bike man
Thanks for the comment. I am still here. : D
hello, I also have a cbr 900 1997 and I would like to change oil and filter, and I wanted to know what type of oil to use (I know all types of oil, but every person I know tells me different things ...), since some mechanics they told me that 100% synthetic ones are not good for mine
Thanks for the comment. No one should be able to give the correct answer. Each person would have put in their favorite oil. Enjoy your motorcycle life.
marco check the manual honda says 10w40 half synthetic for motorcycles .remember it has a wet clutch . go for a top brand motul castrol
Good video i have cbr 919 98" nice work my bro...
Thanks for the comment. You have a great motor cycle too. I like the newer bikes, but I love the 90's bikes. They have a charm that modern bikes don't have. Enjoy your motorcycle life.
Hey i have one cbr 919rr fireblade 1998, wat best oil for dis?
Thanks for the comment. I think the best oil is the Honda factory specified oil. However, I like to try different oils because I think it is part of the fun to try different oils that you like. Anyway, I think new oil is the best oil.
Mine is 97 very strange to they stock is without air intake, I will resolve this soon
Thanks for the comment. I hope the problem will be solved.
This & the ZXR7 are the only two bikes that could possibly replace my 600 f2
Thank you for your comment. It is an irreplaceable bike for me. Even the latest bikes can not surpass this bike.
Yes pretty for sure. Rear undertrays are getting rare aren't they. I've just uploaded a video of my sc33 rrt check it out perhaps? Best regards from the UK.
Filter WAY too tight.
Thank you for your comments. I like to tighten it a little stronger if there is no problem :D
How often should this be done?
Thanks for the comment. In general, it is replaced after 5000 to 10000km. However, since I enjoy changing fork oil, I change it at 3000km.
De todas as esportivas fabricadas e de todas as marcas até hoje com certeza a Fireblade de 95 a 99 são as mais lindas! Insuperaveis
Obrigado por ter tido tempo para comentar. Também eu penso que a '96 Fireblade é a melhor de todas as motos. Eu penso o mesmo que você! Por favor, veja novamente os meus vídeos.
Very nice 🎁🎁🎁
Thanks for commenting. I am glad that you are pleased. Please enjoy my other videos as well.
Este motor tiene turbo
Why does everybody use the old oil to lube the oil filter ? You clean and dry the surface just so you can use the old oil to lube it ?
Thanks for the comment! The purpose of this is to blend the filter gaskets and make them stick together. It is not possible to completely drain the old oil from the engine. There is more than one way to do it, so it's better to enjoy the freedom:)
Nice video! I like the grasshopper 2!
Thanks for your comment! I also love Grasshopper II! I will do my best to produce an interesting RC video.
Hello, according to the manual of your motorcycle you have to change the oil and the oil filter every time you change the oil. Think that if you leave the filter you are going to dirty new oil with the oil inside the filter. Also I think you should start the bike, wait a few minutes and refill with a little more oil until it reaches the mark again. In your video you can see that it lacks a little oil once you have started and it has moved through the system you need to fill with more oil, especially if you change the filter and it fills. See page 64 of the service manual. www.manualslib.com/manual/792826/Honda-Cbr900rr.html?page=64#manual
Thank you for your comment. And thank you for your advice! There are scenes that are cut to make the video smooth. I would like to continue learning to enjoy motorcycles. Please come and see us again!
I wish mine to be condition as yours mate , cheers , and what is oil u put semi synthetic or full synthetic?
Hi! mate! Thank you for your comment. Oil is full synthetic and semi synthetic… I don't care which one to use. I think the new oil is the best oil.
Sure you right:)
Nice video
Thank you for your comment! I also watch your video a lot. I subscribe to your channel.
@@masa5404s thanks, I appreciate it
@@pottersrcmodels7832 Thank you! Enjoy your motor cycle life.
Too bad someone chopped off the rear fender. :"
Thanks for your comment! that's right! I agree with you. I'm always looking for a rear fender.
@@masa5404s, well could be worse. LOL... I'm looking for a whole bike. :)
@@kchappelle Perfect condition is ideal. I hope you find a good machine.
@@masa5404s I found one and will be taking delivery next week. :) It's a 1999 Cadbury color limited edition. Looks pretty original. Same though...some idiot cut off the rear fender. Still has the original exhaust and it looks mint.
@@kchappelle Oh! You found a good motorcycle. The 1999 SC33 is also cool. It's fun to take the time to restore the original. Please enjoy with safety first.
Cool video
Thank you for your comment! Your video is also very nice! See you in the comments.
more fireblade maintanance video bro... nice bike
Thank you for commenting. I think it will take some time, We will continue to maintain the fire blades. Please come to see it again.
Wow man! Your bike is immaculate. I will try to get mine as clean and original. Take care friend. Where are you living?
@@kchappelle What's up dude!Thanks for your comment. My motorcycle looks pretty, but If you look closely, there are some places that are dirty. I live in Japan. It is a country with many motorcycle fans.
@@masa5404s i just tried to find front wheel, it's so hard to find the new one... 130/70 r16. do you think i get that one import from japan to indonesia? i own 1996 also...
Thanks for your comment! Sorry for the late reply. It would be easy to get a second hand item in Japan. It's not impossible to get it in Indonesia, but it will be difficult. I like machines with 16 inch front tires. I hope you can get what you want!
Lovely video. I like your meticulous approach. Your bike looks lovely.
Thank you! Thank you! I'm really happy! I am impressed with the wonderful comments. The motivation for posting videos that everyone can enjoy has increased. Please come to see it again.
Nice! I have the same bike, same color. Mine does not start and I have no mechanic near me.
Thank you for commenting. I like this model year fire blade the most. If there is no mechanic nearby I think it will be solved if there is a service manual and eBay. Enjoy your motorcycle life.
Nice video, did you have to use a front stand or did you do them one by one?
Thank you for commenting. A front stand is required. Because you can work safely. Enjoy your motorcycle with safety first.
I have the same bike, but I do not know how thick the oil I put in it. Is it 10_40 or 20_50 Please respond and the weather in my country is very, very unpleasant
Thank you for your comment. I'm not particular about the viscosity of the oil, I always put the viscosity of SAE10w-50. I think 10_40 or 20_50 is fine, but I like hard oils in the summer and soft oils in the winter. Enjoy a good motorcycle life.
@@masa5404s Thank you .. But I want advice from you, what would you advise me to put in it
@@modysiver7652 How are you doing? Oil selection is difficult. But you are free to choose. The oil used depends on the area where the motorcycle is used. A suitable oil for warm areas is 20_50. My country is hot in the summer and cold in the winter.
Nice clean oil
Thank you for commenting. Thank you for watching my video from many videos. I hope for a peaceful world where you can enjoy motorcycles.
#uckin beautiful... Standard is awesome...😀
Thanks for your comment. Maintaining normal is the best customization. I want to enjoy motorcycles safely.
my 96 sc33 use 100ml - 1000km is okay?
I am exchanging with elapsed time rather than mileage. I think it is enough to change the oil once every four months. Have a good bike life.
You refer to clutch plates and spring ? Or entire clutch basket to replace ?
Thanks for your comment. I think the clutch plate and springs are enough. I want to feel free to enjoy motorcycles.
Thanks for the video . Question: how many quarts of oil did you put in there?
Thanks for your comment. The numbers were written in the service manual. If you don't replace the oil element 3.1 (Imp) qt. or 3.7 (US) qt. or 3.5 liters. If you also replace the oil element 3.2 (Imp) qt. or 3.8 (US) qt. or 3.6 liters. The numbers were written in the service manual. I will post a video when it is maintained in the future.