Відео

@@R4V3-0N it's not something I was ever taught either. I think it's either assumed that you know or you'll just know. 🙄 Sometimes it's just useful to see how it works.

@@elne5657 fantastic. So glad it's been useful. I'm just trying to decide what to do next. 🤔 I think sometimes it's good to recap those foundation skills and knowledge.

@@dewi3300 oh fantastic! I'm so glad it's helpful. I'm trying to decide what medium or tools to do for the next mini series.

@@Loki-and-Thor oh you're lovely. I don't like listening to myself, so that's super sweet of you. I used to live about 10 miles out from Birmingham. Stratford is a much posher accent than mine! 😉

Thanks so much. Yes, do get creating. I'd love to see what you produce! 🙂

@@sorayuu8134 thanks. This was so much fun to do.

@@sorayuu8134 thanks. The video quality isn't great, sorry. Do check out my channel as I have lots of video lessons.

@@artwithtricia that's okay! I can still see the line work and everything of this piece 🥰 I definitely will be combing through your videos, thank you for sharing your work processes! ❤️

Thanks so much. It was good practise for my new mini course. It's so much fun working with mixed media. No rules, just go for it! 😉

You are so sweet! I don't like listening back to myself on the videos! 🙂

@@user-hy7vw4re4s I'm glad the video was useful. I chose this model because I wanted to buy a proper mount cutter, instead of the little tool and ruler. I had a certain budget that I had saved and I went for the largest I could get at my budget. But to be honest, the large size is good for cutting the board down initially, but a pain the rest of the time as I never really cut massive mounts. As you can see in the video a lot of the cutter isn't used. I also don't have space to leave it out. So I end up with a list of mounts I need to cut, then do a big job lot in one day, then it all gets packed away. The model I have is the 450-1, but there is a slightly smaller one below that. I think I would check it could still cut a sheet of mount board (at least width ways) and then buy that size. It depends how much space you have and if you've got a table/surface you can put it on. I've tried to do this on the floor and that doesn't work for me. I need it on a table. Good luck with your mount cutting and get back to me if you have more questions. 🙂

@@artwithtricia Thank you, that's really helpful :)

@@lionelheisler4887 yes they can be useful. I've seen artists take a flat square brush and cut down into it to create a comb brush. Not sure I've got a steady enough hand for that!

@@artwithtricia my thought is maybe it could be done with a pair of thinning shears? 🤔 Personally I might see if I have a square brush to sacrifice for science lol!

@@lionelheisler4887 why not. You can just cut down into the bristles. The one I have is obviously done by machine as it has clear squared off sections cut out of it. There is another brand that has the outer edges cut away and then the inner core of bristles is a comb shape. If that makes sense. But I guess all you need is that thin wispy sections at the tips. Good luck! Let me know how it goes.

@@beccarebecca7841 thanks. I either sketch out on paper and then just scribble on the back of the paper and transfer to block (this essdee white blocks are so easy to trace down on to). But on to a regular 'grey' lino' I use carbon paper. The best is a Japanese carbon paper which is red. Hope that helps.

@@sandyhairston3943 thanks. It was lots of fun and took about half an hour.

@@nikudawillowfrost yes do, let me know how it goes. I have a chatroom on my website where you can post your artwork if you're interested. www.artwithtricia.com

Glad you enjoyed it. Another one coming out in a few days.

Thanks. So much fun playing with these tubes of watercolour paint💫

Thanks. So much fun playing with these tubes of watercolour paint. ✨

Thanks 🙌🙌🙌

It's for sale on my website www.artwithtricia.com/product-page/princess-and-the-pea

Thanks. You can mute and just watch if you prefer. 😉

Thanks for this. I have a few videos like this with loose sketchy landscapes. I even have some very loose 'watery landscapes' which are all about letting the watercolour flow across the paper. This set probably took about 30-40 minutes to tape up, draw in, dry and add washes. There is a full (real time) video here ua-cam.com/video/LjVU2eIHF0w/v-deo.htmlsi=K9_pSbcWpPlR7TUe Good luck with your artwork!

So sorry I missed your comment. I hope your GCSE art went well. Is this your final year? If not let me know if I can offer any advice. 🤞Hope you cracked it! 😁

Me too!

Oh great, glad this was useful. I don't have any tips for dried out pens though...... except get on and use them😉

Thanks. Of course you could! It's just lots of practice 😊

Brilliant! So glad it went well! 👍

I buy a lot of equipment from a shop called handprinted in the UK, I also use Jacksons art and Intaglio printmakers. The printing press is a 'craft cutter' press caller Xcut Xpress. wishing you lots of success in you printing learning journey.

My pleasure 😊

So glad you have found this video useful. Good luck with your project. Do share your project, I'd love to see how it goes!

Thanks! They are on my website. I was really pleased with how they turned out.

Hi, I'm not sure what your question is. Make sure you fully ink the lino block and it is a good even coverage. If you have large areas of ink you may find them hard to get a good print. Make sure your paper is not too thick because this can make printing tricky. Take your time burnishing (rubbing) if you don't have a printing press. Lift one corner and check. If the paper doesn't stick to the lino block a little bit it may be that you are not applying enough ink to start with. Good luck 🤞

Yes the little cutter cuts at a 45 degree angle. You can buy mountboard with different coloured inner core. So you may have a blackmount but white or cream inner. I guess a 45 degree angle, not only shows the inner core, but is also a softer step down between mount and artwork. If you had a double mount you could have a black mount then a white line of the inner core and then a black mount then a white line and then your artwork. It's a good way to make your mount look 'jazzy'! 😉

So glad it was useful 🤗

I use traditional grey hessian backed lino. But I have other videos with mastercut (great for stamps), softcut, easycarve etc. I find the plastic/vinyl types a bit too soft for my liking so prefer the grey lino best.

@@artwithtricia thank you for the quick reply, I have one last question, what’s the easiest way to keep your blades sharp? I’m hearing about using a wetstone or even a diamond plate but there no way I would be able to get that.

@@catlin3949 buy a slipstrop. It's a wooden block with suede on it and you use it to keep the blade sharp. It doesn't sharpen blunt tools, but if you use it every 30 minutes or after/before each carving session it will keep the 'edge' on your tools. I have some whet stones and if you're not sure what you're doing you can ruin your tools. If you have expensive tools use the slipstrop and then when you feel they are snagging when you carve send them to Lawrence in Hove. They resharpen carving tools and it only costs about £5 each. Much cheaper than messing around yourself! Hope that helps.

@@artwithtricia thank you so much, super helpful!!

So glad you are enjoying them. I also teach online; online live courses or on-demand courses. Do checkout my website. www.artwithtricia.com 😉

I'm just dropping water on, but I think I'm using some Daniel Smith granulating watercolour. I don't tend to wash my palettes off (unless I have a specific piece of work to do) so I picked up premixed colours from previous works! So that may be why it looks like it's granulating. You can create fantastic granulation with regular watercolour and acrylic inks. The ink clumps and splits in the water. Give it a try.

Yes the print is extremely popular. I have a few artist proofs left on my website and I've recently had some badges made with the image. Check them out at www.artwithtricia.com

The video on making a dip pen is coming out in about a week's time. But the pens are so cool.... it's worth the wait.

Thanks I'd love to see what you create. I have a chatroom on my website where my students share their work. www.artwithtricia.com/student-chatroom

Ha ha, fantastic. I'm just about to edit a video to show you how I made the metal dip pen.

My art studio....is my conservatory. Which is a bit cold at the moment! 🥶 But I'm lucky to have a space where I can spread out and leave projects out. I hope you enjoy my other videos.

Thanks. Vintage frames can be so interesting and matching them to the right piece of work can really make them sing!

Yes I mixed this colour specially for this print.

It's and Xcut Xpress, but these aren't for sale any more. Try the Sizzix big shot or the big shot pro.

👍 thanks

Thanks 😊

Thanks. I love working in these sketchbooks.