- 9
- 136 451
tacosteelersman
Приєднався 11 лип 2010
Yanmar repower, original Cub Cadet in motion
My CCO named Knocks a lot, with the Yanmar at idle pulling my little wood trailer up an incline in first gear. Have you ever been run over by a cub cadet? Now you have. TWICE..This is my repower project in motion. SPECIAL THANKS TO MY TRACTOR FORUM.COM
Переглядів: 37 051
Відео
Yanmar powered original Cub Cadet
Переглядів 16 тис.13 років тому
Knocks a lot lives again. This is the first start of my Yanmar diesel Cub Cadet original repower project. Not finished but looks promissing
63 Cub Cadet original start engine knock
Переглядів 4,4 тис.13 років тому
This is my CCo named Knocks a lot. I bought this Cub not running no spark, the points wire was grounding out on the points cover. Fixed that started it up and she knocks bad. But I was able to dial the linkages in and get the machine shifting and moving on its own power . Oil change showed metal flakes in the oil engine needs a rebuild or repower.
63 cub cadet original start run drive SMOKEY
Переглядів 2,4 тис.13 років тому
This is one of two tractors I bought, this one is a 63 IH Cub Cadet with a good running engine that smokes like crazy. It drives great, it was painted by the PO with a spray can but it looks ok. I bought this running for $200 and it needed a carb cleaning and some adjustments done, now she's a beast. The choke was halfway on during this vid, WHOOPS
55 briggs fermont generator
Переглядів 33013 років тому
Here is my newest engine, I bought it not running with generator not running for $80, Cleaned the carb, sanded points, changed oil, and cleaned air filter oil reservoir. Now it runs very nice. I am looking for any info on this 1955 3KW Fermont generator coupled to a 1955 briggs 23FB, I think it is a military item but not sure. ENJOY THE VID
18 hp Ariens RER
Переглядів 70813 років тому
My Ariens 626 RER repowered with a 18 horse twin Briggs running. I use this mower regularly
Yanmar L90 VS China diesel L 100 clone cold start
Переглядів 25 тис.13 років тому
I say cold start on the vid, I mean fresh start, the outdoor temp for this vid was 78* F. Yanmar has more hours but is quieter even without any exhaust pipe than the China clone (a lot of the china diesel noise could be from the generator head). I usually let engines warm up before reving but I wanted to show the exhaust difference cold.
Yanmar diesel start and run
Переглядів 50 тис.13 років тому
Second start and run my 9 horse diesel. First start was not captured on video. After 3 years of not being ran I primed the fuel lines and the Yanmar took off. This is my first youtube vid, thanks for watching
Thats freaking awesome redneck technology love it dude
I have a 186FA clone engine in my generator. It was running this year for long periods of time ~10h a day or sometimes even more. Its very loud but there is no smoke while the engine is running. Your smoke is fuel related (at least mine was, i get premium diesel and it does not smoke at all and can start on cold mornings). Its ok for the price
Love the ozzy inthe background
i was amazed on how you start the yanmar using drilling machine. can you please upload video on how to start diesel machine with drilling machine. thanks
The smoke and knock has nowt to do with it being a China clone its because of the shit quality diesel fuel in the USA. Thats why these engines are banded in the US. They run sweet and clean in the UK and the EU they are just loud. You can advance and retard the timing by removing or adding shims on the injector pump.
tacosteelersman-I have the exact same generator in my barn. Model:3GGS.S1. Im working to try and get it running. IDK if the set is any good. The engine had issues when I first started on it. The voltmeter is missing as it was broken when I first started on it. I have some snaps I can share if you desire...
It’ll probably still run for another 20 or 30 years
Tractor is cool. Buy a tripod.
HA it sat on side "SILENT DIESEL GENERATOR". its too loud even on u tube
Stp creep in the background, will you use the starter generator on this from the Kohler?
taco steeling, oh good one. very nice vid. very nice repower. Wendell has nothing on you, except his are older and prettier, and BIGGER.
I have a l100 and it won’t start at all
Lookslike a ih cub cadet 72
I have one of those, it's actually a 7 horse. Yanmar L70 AE
No its actually a 9 horse like the guy in the video said. They make a 7, 9 and 12 horse. Dont assume stuff.
Yanmar makes fine diesel engines, this is one of them. I wondered about the starting method and that belt, lot's of potential there for a good slap on the bare arms etc. On that subject of the line in your teeth drooping across the flywheel/pulley/drill and belt,...oh well, you can figure out the rest!!!
nice job and runner.
Do the easy stuff first. Check engine oil, air filter, and make sure it has fuel. Confirm fuel shut off is in the on positionLoosen the fuel line at the injector and hold down the compression release leverTurn engine over till fuel is leaking out of the loose connection. Tighten connection and start it up.
your Chinese one is exactly the same as my one,mine run good every day until I stoped using it back in October now it won't start at all,but I did get it going with easy start once,run it for an hour stopped let it cool and tried to start it again but nothing...just keeps cranking but not firing up..anyone got any ideas why it won't start ?
I'm guessing you mean fuel oil, it sipps fuel, I can not give you an accurate guess on the usage. I can say it is very little. It does not use any engine oil at all.
I have not done any mods on the cub since the vid, it is just a yard dog and a toy for my kids.
Just a word of advice. Be carefull with the big pulley in front of the engine. They(kids) might become tangle up and hurt. Just saying. Nice work tho!
This is very nice. What did you end up doing for a hood? Do you have any recent videos of it?
It is a 3600 RPM engine
Yes it still has the original engine. It has not been ran in a long time, it is hibernating in my barn.
It is a fun engine to run, even more fun to start. No accidents or injury from starting my Yanmar yet. Yeah you boys in the south know how to get it done, no doubt. Thanks for the comments
The Yanmar is rubber mounted, a solid piece of rubber that is the same size as the bottom of the engine
I have access to many of these engines. Used to be on generators. Some need TLC.
I like the total loss lubrication they have!
Once that wheel started spinning after ignition, that loose belt posed SERIOUS safety problems, and it was connected to you through that drill and pulley. Not to mention there was some kind of loose twine or something also in the picture. This is Darwin Award winning stuff here!
Wuss
Yes there’s always a safety monitor out there.
Are u going to keep the original engine in this one
Lol. I love it. Nice engine and better starting procedure....
looks like it needs rings
that is a great tractor if you rubber mount that engine it may help you
The 15 year old Yanmar will be running in another 15 years when that Chinese Junk long dead. I am not rich enough to buy cheap generators.
P
Yanmar rocks.
That sucker is a monster! What's the rpms when u revved it? Sweet motors .
The Yanmar is far superior, the clone leaks oil but still runs good. I have 0 complaints about the Yanmar it runs great and is great. Of course it is mounted on my cub cadet original so it gets run time.
Yes the drive pully is custom built to what I wanted. All steel construction, and just a bit smaller than stock.
I'd love to know more about the drive hub. Custom I assume? I am looking to do the same with an original I just got ahold of.
Put some Lucas Oil I'm that bad boy.
courageous start.. with your teeth. simple and innovative.. I am building a diesel bike will the same engine
Send the link to us both please. Id love to see. I love The German inventor Rudolph diesel and Yanmar!
I had to get a different length belt and drill the frame to accommodate the twin and rig a few things together like the fuel tank and key switch. Really it was a preaty easy conversion.
I had to adjust the throdle springs to allow it to idle down where I wanted it to run but it is running great. I am from western NY.
I'm not sure how hard it is on the transmission and I'm not worried about it. So far I have had no problems at all. An old starter generator might have enough power to turn it over. I will have to try that when I find some time to tinker with it. Thanks for the comments.
Tacosteelersman1 I dunno if you have or not yet but I use a starter/generator off a cub to start a lister lv1 just fine.... cool project 👍🏻
Since the motors running so much faster than the transmission is that hard on the transmission. I have a Cub Cadet 104 that I am looking to put a 10 horsepower diesel on.
Josh B no it’s shouldn’t hurt it
Because the it’s the gearing is making it slower than the engine
Don’t you dare mess up a 104. Any good cub cadet is hard to find now.
the diesels are great, had mine 2 years no problems better than the 16 horse briggs i ran and uses so much less fuel too
Awesome job!
Hi wondering now that a year has passed how your Yanmar L90 compares to the china diesel......would love to know.
I love old generators, i reccomend you go to smokstak forums and go to the generator page for help on this
So what did you end up doing with the yanmar?Yours was quiet,most air cooled diesels i see like that sound like the world is coming to an end when fired up.
Great little engines those. It's a pitty though that they don't run too well at low RPMs. I have one on a concrete mixer and its minimum idle is about 2000rpm. Your runs very well, perhaps the inertia of the extra pulley allows this to run so low. You should definitely enter this in a diesel "how low can you go" competition. Your accent is cool. Where are you from? Canada?
You need to rig up the original starter generator on there to start it