Відео

THANK YOU! I have no idea why those retards at Nissan feel like they not only have to pull this needlessly complicated shit, but also chose to publish tutorials that tell you to do the WRONG FUCKING THING

Hi, Same can be done for my XC90 D5 right? The Volvo Liquid is also universal and safe to use? Thank you

Great videa thanks. Mine has the same problem. Do you know what the single spade terminal does that is to the right of the plug with 4 spades jn it? On mine there is nothing on that terminal and I am wonderimg if that is why the hour counter is blank? Thanks

This worked!! Thank you so much for posting. 2011 xc60

Thank you for sharing the idea with the plastic tubing, regarding the remounting of the brushes!

great access. its not always like that on boats

Tip: Empty reservoir, fill with new oil. Disconnect the retur line, hold that into a empty 2 litre container. Then, have at least a litre new oil ready. Get some help to push engine start and stop. After the engine starts, pour new oil into reservoir and stop engine after 2-3 seconds. Make sure reservoir do not go empty. This is a procedure that also must be done when changing the pump, to avoid filling the new pump with dirt.

Way out of my comfort zone. Especially with the edits, but thank you! I’ll know what to do if i had to.

Tusen takk👍 Husker jo aldri fra gang til gang 😅

I would love to see how you make opencpn run fast without lagging on raspberry pi 4. I am struggling with this.

6:51 screaming faces 😎😎😎 anyone else seen this?

Did you push the tube all the way down to the pump itself? There's a chance you might get air into the system.

Nice! Do you experience opencpn being painfully slow when connecting wirelessly via RVNC? I do, yet I run it on a rpi5. Although at start is was a lot better if I recall it correctly.

What the function of decompression lever ?

Where can I buy the replacement LCD?

Nice job.

Thank you. Finally got the wipers up. 2011 Juke SL

You are speaking perfect English yet you are on the website in a different language?

Bought mine yesterday and it’s doing this. Will be getting a new nozzle.

also if i put the circlip on the back of the shaft it jams the shaft from turning but yours went on real easily? mine got a small spring at back instead of a washer

please tell me why you left the air filter in the way lol?

Thanks for sharing. Looking forward for your coming OpenCPN episodes. Cheers.

Hi Gunnar, you seem to be a very familiar with a Raymarine tiller pilots. Perhaps you could help me about my ST2000+ tiller pilot... My brand new tiller pilot does not hold the course in AUTO mode. When I set the desired course in STANDBY mode and press the AUTO button the push rod (little by little) goes completely out, or completely inside, and the boat start circling endlessly. However, if I remove the tiller pilot from the pin, and steer the boat manually (left - right), holding at the same time tiller pilot very near the pin it reacts normally, as it supposed to do in AUTO mode, the push rod goes IN and OUT normally accordingly to my (left - right) steering... but when I put it back on the pin it no longer holds the course again. Thank you very much.

Excellent.. looking forward to the next video on this topic..👍

You can release the piston in the EPB with a 9V battery without disassembling the housing: ua-cam.com/video/8y54DKRHlAo/v-deo.html

Did you replace the old stainless steel water tanks with a flexible bladder? Did you line the area with plywood first? Would love to know more details as I am currently doing this on my Contest 33.

Nice upgrade! How thick was the fiberglass hull?

I am an original owner of a 2011 xc 60 T6 AWD with 171000 miles. NO issue with power steering at all all these years. I have never drain/fill the power steering fluid but have topped off the fluid with Volvo power steering oil. Did you notice any power steering issue/problems before you performed this task or this is just a routing maintenance to get the new cleaner fluid into the system? Thanks

Hi Gunnar, thanks for the video. Have you tried to manually crank the engine? How to use decompress levers? Thanks

its weird to watch video with no sound!

I would recommend dropping the RPMs to around 800 when starting as to allow the oil pressure to build.

Can I change the reservoir easily when its empty?

Såna skulle jag vilja ha i min stålbåt

Same mashin don't pressure not work good

You just made my day 😊I am just starting the restoration of Contest 29 and was thinking yesterday, I really want to get that diesel tank out and make an inspection hatch 😊

How to change dashboard language?

Ada dinamo setater yamar

My engine is year 2002. I suppose I'll need to clean the Starter like you did, so i ordered a new Starter just to standby in case I ruin the servicing 😊 Thanks for the video❤

How old was the engine or running hours before servicing the starter?

If you have a newer version of Tachometer with a silver ring its not made for open up and replacement of LCD is rather hard as example the grade is glued and not screwed in (I did it on my KAD300 from 2003)

thank you so much

Good morning, Thank you for sharing this very informative vidéo. I allow myself to ask you for the references concerning O-Ring seal. Thanks

Did you notice anything?

Nice video with no annoying music. Thanks!

Thank for the video man, it's a job i have to do. Can i ask when do you have to replace the stuffing box (hours ? years ? symptoms?) ?

Many thanks. Much appreciated.

How many liters you need?

👏🏻👏🏻👏🏻👏🏻👏🏻takk!

Nice job! Did that fix your starting issues?

Excellent thanks