Відео

Hi, first time on your channel, you have done a great job. I bought my fist cnc a month ago, Onefinity elite foreman and I decided to install ATC spindle. Never done this before but I think I have finished connecting all pneumatic valves, water cooling and flow sensor today and everything looks working manually for now :-) (changing tools by pressing the button manually I mean), I need to make places for toolholders and to set tool positions in masso. I have connected manual tool release the way so it doesn't work while spindle is spinning as a safety precaution. There are 2 things I couldn't find how to do. The first thing is how to configure tool holder sensors in masso, have no clue where to find that? The second thing is how to configure the pneumatic valve that helps to clamp the tool if the spring fails (tool retracting valve). -To solve the 1-st issue with toolholder sensors I was thinking to use "open door" input for that, but I am still thinking on it. -Tool retracting valve (that clamps the toolholder in place), I was thinking of two possible scenarios, 1-st method to mount the time relay to normally closed contact , so when the output is High and tool is released the time relay is off, but when output goes low and the spindle starts to clamp the tool, then the normally closed contact turns on the time relay and it triggers the return air valve for 5 seconds (5 sec. is showed in the spindle manual) 2-nd method is just to connect return air valve to NC contact directly, so whenever output for tool release goes low, the tool retracting valve will be turned on, but it will have to be under pressure almost all the time, though I have checked, the spindle is still rotating well in that circumstances so I think it will also work. I am not willing to ask about the way you have done it, not trying to get your secrets, just trying to hear your prrofessional opinion on my humble thoughts, if possible off course. I am not professional in this subject and I am sorry if I sounds stupid, as I said I have never done this before, learning from youtube 🙂, from guys like you,Thank you for that. English is also not my first language, so I apologize for my mistakes and for very long text.

Will you be offering Shop or Affirm as payment options for the ATC?

This is an amazing spindle, ive been running its predecessor S30c for 5 years, alex the owner of the company is an amazing guy and takes great pride in the manufacturing of his spindles. Rest assured that this is not some cheap chinesium spindle that bearings will cease after a year or two. Buying a machine specific kit takes so much guess work out of the equation. I had to figure it all out on my avid machine and it was a paint in the a$$

Me likey

What’s the advertised runout of these new, less expensive spindles?

nice, i like it

Looking good ... though we need the Masso upgrade that says some tools are in the rack and some will be hand feed. 😉

What are some of the main features that sets your ATC above competitors like pwncnc?

Geez dude...nice to know you're so proficient at Vcarve. Would be great if you could slow down a little and explain why you're making your selections and what they do. Otherwise, it's just like watching fly through the video as fast as your brain works.

Thank you for demo'ing the safety features.

Great walkthrough of the safety features of your ATC system! As someone who has ran industrial CNC routers, I can say this kit provides a VERY similar experience to operating machines with a $50K price tag. Well done!

I don't see any information about this on your website?

This video made me happy I didn't buy the QCW table.

Will you sell the new spindle mounts separately?

A full desktop enclosure laser does not laser in a angle, just the xTool F1.

cut test vs aluminum 6061 plate please

What about for the X axis? Is there some kind of accordion attachment for it and do you have this for the onefinity elite foreman’s?

How big is the hose you are using in that video?

I love the setup .... now I am the weakest link

I wish there was a dust collection boot for doing deep bowls. The problem is when the bit is right next to the inside wall of the bowl, where it seems no dust boot would work/fit.

What’s the largest surfacing bit you can put in it with the 2.5 version 80mm?

Of course right after I buy a Nighthawk. Not complaining 😢 but that front mag release is awesome, want.

Congratulations on the release of the new dust boot!

Let me know when its available. Love my nighthawk but this looks pretty cool!! Way to go again!

That’s a pretty neat design!

Very impressive! Cant wait to get one myself!

At 0.48 timestamp you say biggest number, the numbers are negative.... you want the smallest number (Mr. Literal here). Also, if you can get a helper to do this with it sure helps a LOT. Seeing or feeling a small deflection 4 feet away is tough. A jog wheel also makes it easier ... on click on the wheel was about a 0.01" movement at x100.

Hey man check into the Further Fabrication Y400 CO2 laser build. Your the type of guy that could build one and come up with some awesome mods for it. I built the Y1200 (2'x4' roughly cutting area) for around $2,800. Still saving up the funds for your spindle kit. Thanks again for your Onefinity support!

Want an ATC SO BADLY!!

Keep up the content! Would be neat to see an ACM folded over box to then make into a Onefinity light box.

Can you cnc plastic letters?

are you actually using the tool holders on all 3 axis at one time?, if so how in the world is that configured?

what is this "ruf" you speak of? 😆

May I see your license and registration sir?

Whoa!!! 😮

Big time upgrade.

The problem I see with adding a commercial high end spindle like this to these machines is that they resonate so much the whole gantry shakes, you spindle isn't going to fix that. You can really hear it at 21:55 . I've been running cnc routers long enough to know those vibrations transmit into the edge finish. Also Onefinity chose motors that are underpowered with not enough resolution for any real work in aluminum. They have them set from the factory for maximum torque with 400 steps per rotation this creates a horrible noise when not cutting straight lines and terrible edge finish when cutting 1/2" aluminum. I can get a REALLY NICE finish if I use a minimum of 4000 steps per rev but that really lowers the torque to much for roughing. I find with my 2.2kw spindle on the elite foreman It takes me 2.5x longer to do the same thing on the commercial machine I run for my day job. I know this is just my opinion and don't get me wrong you look like you have come up with quality product. Its just that I would think swapping all the motors out for something like the 3Nm Masso steppers first would be the bare minimum, That would require a new power supply and fuses but still doesn't solve the problem of having no brake on the Z axis and no shielded wire on the steppers to block the EMI from the spindle. I know that they announced a motor with brake recently but that is still only on the 1.2Nm version. Preferably I would go with AC Servo Motors. The other ATC kit option on the market for these machines comes with a 4 pole motor instead of 2 pole option which would be better for metal working as will.

What's it making?

Hi there, I was analyzing your channel I saw your videos, and the channel niche uploaded every good video. Congrats! but due to optimization/SEO problems, your video isn't getting viral or you have low views, likes, and comments compared to your competitors

Where did you get the ATC spindle that works with the Masso ? thank you

I am disappointed, I thought that was going to be a Bengal Tiger head.... darn KC folks .... Seriously though, nice job. Was the wood a maple?

What material is that in the first shot?

What happens if dust and chips get on the tools sitting in the tookrack? Is there a puff of air coming through the spindle to somewhat clean up the tool holder before the spindle grabs onto it? I understand that a dustboot helps, but there is no guarantee.

So this will only be for the Elite/masso machines?

Ten whole units available. Takes three months to get one. Voids the Onefinity warranty. What a amazing opportunity to lose a lot of money.

Looks awesome!!

Looks good Nick. I am interested in the back vs front tool rack discussion..

The end blooper clips made my day 😂

Bad design tool holder without cover..it can damage the atc spindle because dust etc. Not recomended😢

What’s the cost going to look like?