- 212
- 92 365
rcnitro001
United States
Приєднався 16 лис 2010
RC fun on the road in the water and In the air!!! We like to do it all. Not knowing how the day will go but its all fun when you can just get out and enjoy any hobby. Lets have some fun
HPI rs4 3+ #nitromotors #nitrorc #hpiracing
Installed the new Amazon fuel tank and it worked pretty good. Now just need to readjust the carb.
Переглядів: 380
Відео
Himoto Mega P. .21 engine #nitromotors #nitro #nitrorc #rctruck #rccar #ai
Переглядів 3849 місяців тому
Took it out to tune and see if second gear works. Had an issue with the spur but and second gear does work just needs to be adjusted. Thanks for watching
Himoto MXT-2s Mega P .21 #nitro #nitromotors #nitrorc #rccar
Переглядів 249 місяців тому
Finally cleaned up the Himoto and put it back together. Cleaned up the sh .21 engine, the original wheels and gave it a little start. Running video coming soon. Thanks for watching
Himoto MXT-2s Mega P .21 #rcnitro001 #nitro #rcnitro #monstertruck #rctruck #rc #radiocontrol
Переглядів 639 місяців тому
Got the Mega P all cleaned up. Gonna put it back together and tune it up. Thanks for watching
Himoto MXT-2S #rcnitro #nitromotors #nitro
Переглядів 459 місяців тому
Going to break it down and clean it up. Not sure what wheels I will put back on it. Thinking of making it a street nitro.
Himoto MXT 2S mega p startup #nitro #nitromotors #nitrorc #bigblocks
Переглядів 5711 місяців тому
So I freed up the engine and got it to start. Now just need to clean it up and give it a run.
Himoto MXT 2s mega P nitro #rcnitro #nitro #rcoffroad #rcspeed #nitromotors
Переглядів 2911 місяців тому
Picked up this nitro truck for 70 bucks. Gotta clean it up and see how it runs. Looks like a pretty decent truck
HPI RS4 3evo+#hpiracing #rcnitro #nitro #lipo #lipobattery #2slipo
Переглядів 10611 місяців тому
Been using this 2s lipo battery in my nitro cars and they work perfectly. Have not had any issues or had to replace AA batteries except in the controllers. Just recharge when needed and go. Working on using them in my controllers next. Thanks for watching
Bass Tracker XL #bassproshop #basstracker #cabelas #bassfishing #bassboats
Переглядів 70Рік тому
Breakin process complete. I went for a little ride but cut it short. Time to have some fun with it now. Thanks for watching
HPI Savage LRP .28 spec 4 #hpiracing #nitro #rcnitro #rctruck
Переглядів 60Рік тому
Finally got one out to run a little in the backyard. Thanks for watching
Hook series
Переглядів 38Рік тому
So I replaced my hook2 with at Reveal 7SS and moved it up to the front of my boat. #lowrancefishing #lowrance #bassproshop #bassfishing
Got a new boat!!
Переглядів 94Рік тому
So we got a new boat just in time for that perfect fishing season. Fresh or saltwater fishing is what we do. #rcnitro #cabelas #bassproshop #trackerboats #lowrance #lowrancefishing #minnkota
2 Bad Ass Nitros #nitromotors #rcnitro #nitrofueled
Переглядів 75Рік тому
Decided to start these two nitros today. Will do a run video tomorrow. Can’t let them get too dusty just digging on the shelf. #nitro #rcnitro #nitromotors #rccar #rcworld
HPI RS4 T3.0+
Переглядів 101Рік тому
Front bearing was leaking so I am going to rebuild the engine. Changing out both front and rear bearings. #hpi #hpiracing #nitrofueled #nitrorc #nitro #rccar #rccars #worldwide
Nitro’s & Nitro’s
Переглядів 108Рік тому
So I decided to start all 5 of my nitros today. Haven’t run them in a while and only one acted up a little. #hpi #hpiracing #nitrofueled #traxxas #rccar #nitrorc #onroad #savage #lrp #dynamite
HPI Savage #hpi #rccar #nitrorc #nitrofueled
Переглядів 258Рік тому
HPI Savage #hpi #rccar #nitrorc #nitrofueled
Nitro 4Tecs #traxxas #nitrofueled #nitrorc #nitro #rccar #rcdragracing
Переглядів 190Рік тому
Nitro 4Tecs #traxxas #nitrofueled #nitrorc #nitro #rccar #rcdragracing
Kinda having a struggle on getting it on
So I noticed there are 3 little notches in the frame of the pulley. My guess is so you can tighten or loosen the belt size,
I have that car from the 1990s company was Bolink at the time same chasis and wire wing. Looks better with the wider tires. Wanted to try 1/8 scale on road. Also want to figure out how to modify rubber tires a larger rc truck so the tires can shrivel up from centrifugal rotational force like like real dragster. That would be so kool
🆒 video, ℹ️’Ⓜ️ the KING 👑 of LRP cause ℹ️ have 2️⃣0️⃣ extra or spare BIG block engines & blue is better 🤑👍🏼🔷🛻🪛🏁
🆒 video, & ℹ️ have 1️⃣0️⃣ HPI savage 2️⃣5️⃣ 🤑👍🏼🛻🏁
32 pitch spur gear ?
No I was using mod1 at the time
Hell yeah! I love the 4Tecs. I'm replacing rear belt on one this week. Looks straightforward. Good vid.
Why are you tearing up those foams😂😂😂 not rubber dont burn them out youre festhering the material
She running awesome sounds great and that tune is perfect 👍🏽🤙🏽🤩
Thank you sir
How long is the run time
Depending on how I run it I get 15 to 20 minutes a tank
How to destroy your savage...
It’s ok. It’s a toy. Break it and buy another one. Money grows on trees
Man very nice, I also want to get that new style HPI controller and receiver for mine
Nice run!.😎👍 I noticed that your needles are easy to turn ,worn o rings will cause leakage an cause needle to move throwing your tune off , I use sticky grease on the needles for a quick fix ,so you might need new o rings or needles for the carb! I dont mean to come off like I know everything or that you dont know how to tune ,just giving you what I learned from my experience with mine!..👍
it looke like their are bubbles of fuel comming out of the head where the glowplug is, u might want to check to see if its tight or if its missing the copper looking washer for the glowplug, otherwise its a massive air leak and it is and will mess with ur tune constantly no matter what u do but otherwise its an awesome car!
No air leaks or fuel leaks at all.
@@rcnitro001 if u look back at 0:55 in the begining of the video u can see fuel bubbling and leaking out of the head where the glowplug screws in
@@PopesterRcyeah it was dirt moving around in there
I love the hpi RS nitro cars I had the mustang
Why is he tuning the transmission with the engine still on?
They can be adjusted running or not.
Nice
Thank you sir
5.9 is pretty good i have 3 of them engines
looks clapped out servo having a seizure there towards the end of the video and your engine is powerless that bogging that it was doing when you were revving it
Is that a redcat
No it’s made by Himoto RC. Apparently they made these nitros many years ago. I could not find much info on this one. Just some old UA-cam videos ranging from 10-15 years back.
@@rcnitro001 thanks for the reply, from what I could see of it , it looks lot like an earthquake 3.5 I have two of them. A lot of guy beat up on the redcats but I've had good luck with them
@@sammiller8497I still have my Volcano electric that I still use from time to time. Redcat has coma a long way.
cool nitro rc and run
Idel sounds good ..probably was cold ..nice lil rip around
Thanks for the sub! Retuned the favor! Love that you have a MXT. That was my very first r/c that got me into the hobby!
Cool man. Thank you for the sub
Needs a tuning
Damn it, after i watched your video i checked mine for the ejector screw and oh lord that thing was loose as F so i used a screwdriver and tightened that up. Thank you sir for sharing your experience with us!
nice clean rc parts
Nice..
Y tunes carb IS to rich
Just wondering if you still have / run this car? I ask as I recently got one second hand as a roller but plan to use it mainly for fun on road driving. Thing is I’m not sure if it can be set up like a race car eg oil filled shocks and adjusting weight distribution etc or whether I’ll need to add weights like they do when racing rc touring cars.
Yes I still have and run it. You can fit oil filled shocks and race it on carpet or pavement.
@@rcnitro001 Brilliant - and thanks mate 😎👍🙏
I just did this to my xo-1 and I have a few thoughts. First is that the traxxas big block has an RPM limit that will not allow you to fully take advantage of the 8s power at the 1650 KV level. The second is that the only way to keep the car controllable with 8s is to very gradually accelerate.
So I pushed this original motor as much as I could on 8S and never had an issue with the wax or motor. I think it will take a lot more. You can install a gyro which is what I did and it made a big difference. I also change the diff oil to 100k weight so the front wheels did not spin as much as the rear.
Cool Rc 🔥 👍🏽 💯 💪🏾
So I had a Savage 25 and never had a problem with it. I got a 3rd generation Savage X 4.6 and that SOB is still stuck in the high gear. The adjustment screw is a little a skew so I can’t get the 2mm driver in there. I’m going to have to take the transmission out to get to that sucker. Poor quality control and assembly by HPI because I hear a lot of people have the same problem
what contact tire part number are you using please?
JW30RA on Amazon
Hi, what are the contact tyres part number please?
So sorry for not getting back 11 months ago. Contact foams JW30RA on amazon. Hope this helps
Your savage could use a 3rd gear with that perfect a 1st 2nd shift. Brilliantly dialled 👍🏻🏎💨
Congrats brother that's the dream right there
What cat pack is that?? I'm looking for one for my basher.
I made it myself. It definitely helped with the ripple
I really hate to tell you. the X01 is JONK> and perfect pass will not help you in a speedrun, as this JONK will spin out and all your hard earned money will be wasted. The ticket is Arrma. I ripped out the esc and motor and introduced a sledge hammer to the rest of the car. Even if your going to do a drag race, you will not be successful with perfect pass, as it was made for speed runs in my opinion. I have ten of them with other perfect pass products. Instead of buying a 1K transmitter, LOL..... Get yourself a Limitless chassis and build it from their. Their is always a sucker to buy that chassis.
I appreciate the feed back. I’ve been in this hobby for over 20 years. Like Donald Trump I like to make things better. Like true race car drivers you buy a car to make it better and NOT have it made for you. Not everyone knows how to figure things out and with these little toys it’s definitely not hard. If you know what you are doing any X01 can be better than any other rc car.
Love mine with saleen bofy..
Iv owned a Savage with the 5.9 For quite sometime, beast of a machine but as yet never actually used it due to running like a bag of spanners, either too rich, too lean or just simply won't start!!! Looks nice on the shelf tho👍👍👍
The tune sounds great
Thank you sir, man I love watching your videos
U could done better
Cool video, I have an older XO-1 myself that has a Hobbywing Max 6 with 4985SL 1,650KV other that mostly stock but last run i bent a half shaft on the left front driveshaft and i stripped the stock plastic spur gear. I'm thinking about putting in a Castle MMX8s with sensored 1717 1,650KV or keeping the Max 6 combo i also looked into new driveshafts since the stock ones aren't that great.
Try out the gpm drive shafts. They have held up pretty good so for me
That is the precise set up I am putting together (the Caster MMx8). Crazy that the motor and esc is about an ounce less than the stock ones.
Sweet truck! It looks to me like a rs4 ego judging by the orange and grey metal parts, but awesome!
*evo
Thanks. Yes I believe it is the 3 evo model. This thing is pretty sweet and clean.
Very nice RC. I noticed that most of your more recent videos are on nitro's. What platform is your favorite?
I noticed your running a metal spur in your Slash. I have a DR-10 and a Bigfoot that I have upgraded the electronics on both. They seem to be good for one or 2 packs and then the gear is toast. I was told by the manager at a hobby store I visit that upgrading to metal will create all kinds of problems. It's not like the plastic spur gears are very expensive so I just swap them when they strip out. What are your thoughts on that? Couldn't you just adjust the slipper to compensate for steel gears? Oh by the way thanks for the sub and I have to complement you on your car collection. It's Awesome ! 👍👍
Thank you, I have not had a problem with the metal gears. They are the mod 1 set and they seem to be doing fine. Only ran 3 s on it though. I think anything above that will definitely cause issues.
@@rcnitro001 Thanks for the reply. I do have a 4wd buggy with metal spur, 32 pitch as apposed to 48 and runs fine on 3s. Actually 3s is what I run in most of my cars. I haven't graduated to 4s or 6s only to keep cost down and have enough left over to pay my gas bill each month. Thanks again for the help. I'll try out a steel gear in my DR-10 and see how she does. 👍👍
Nice run for sure. Congrats. The Limitless seems to hug the ground better than the X01 but maybe that's just a fluke. My money goes to the Limitless. Maybe some day I'll get one. 👍💯💯
Yeah I think it was a glitch in the system. That was my brothers car and just wanted him to feel good about it
Thanks for sharing the Perfect Pass. I have heard about Perfect Pass before but had no idea what it was. I was under the impression that Throttle Exponential was the same thing. If you have a good radio it seems like that is basically the same concept. I have no idea but I have noticed that some cars just spin out more on takeoff than others. All things being equal. Great video for sure.
😉 Promo*SM
Ever decide? The Spartan on 8s would be awesome.
Have not decided yet. It’s still sitting in the shelf. Thanks for asking
Cool hotrod Brother. Back in 1990 I built a R/C funnycar powered by a "White Lightning" Solid Booster Rocket engine. It did the scale 1/4 mile in less than a second. Was so fast I couldn't control it. By the time you could react, it was already through it. It was a novelty but Maaan was it cool. Shot fire and smoke out the back.....
Oh wow. Would love to see a video
I can not find new front n rear diffs I love this little car. My engine purrs check your idle gap.🎉🎉 Great buy bruh