Відео

I opened mine, followed along. Leveled, etc. For whatever reason every time i try to print it fails. I get a thin circle on the build plate and some start of the grid from the test stuck to the bottom of the vat and that's it. Any clue why or how I can fix the issue? Im trying right now for the 9th time with an increased exposure setting to see if that helps but I am so frustrated. 😅

Amazing 😍

Thank you so much for these videos, as someone who just plays w filament printers and got a resin printer bc a Mono 2 was like $200 for Prime day and now I’m getting around to setting it up and quickly realizing this is completely different to what I usually play w. Thank you so much

Maybe I missed it, does the protective coating stay on the build plate? Or is it just packaging? I’ve seen some videos remove it but anycubics own setup video and instruction booklet says nothing about it. I’ve worked w filament printers for awhile but this is my first foray into resin 😂 makes me so nervous to remove something that might be suppose to stay.

You have no idea how much I appreciate you for helping me and everyone else out by making this video! You’re a very good instructor, great step by step instructions, and demonstrated perfectly for an absolute beginner like myself! I had to go and watch your other videos once I heard you say you were making Anakin’s pod racer!! I just got my printer for my birthday and I hope with some practice and patience that in no time I can start making prints and dioramas as detailed and brilliant as yours!! Subscribed!

Best video on youtube

Great video! Thanks a bunch, i've got one on order, couldn't pass up $269 free ship and no tax.... This is going to help me get going quick.

Amazing tutorial and super grateful for what you explained. Do you think you could potentially help me figure out why my test print doesn't want to stick to my print bed? I set it up identically to how you went about it, and sadly don't see much success so far

Thank you for this video. It was a huge help!

Brilliant video. Thank you.

ok disregard my suggestion in the other video. this is what I was looking for. thanks!!

where do you get your models? maybe a video on slicer software??

This was suuuper useful for my first setup! No one else had "beginner" videos like this. They all gave tips for setup but not a brand new from package type tips. No one mentioned adding the protective film other than saying to do it, not showing it. Thank you so much !!!!

Epic

Nice!

Thank you for the video ,but I'm using photon workshop 3.3.2 ,there is no support menu at photon workshop 3.3.2 ,,i hope that you can show how to find support menu at photon workshop 3.3.2 ,thank you

Hi CK, I need your advice, I did everything you did in the video. I printed the anycubic test file. The issue I had is that it was impossible to remove it from the plate. I ended up breaking all of the base just to get it off. What am I doing wrong? Any advice is welcomed. Keep up the great work.

I have an issue ,how to make a support before slicing with photon workshop 3.3.2 ,can you help me?

Gotta love a good crafting video that includes A SHRUBBERY!

Thanks for the video, exactly what I needed. ❤

Same, this was really helpful thank you so much this was wonderful!

new sub here! im new to 3d printing and just got the anycubic photon mono 2. what stl site do you use for your miniatures?

THX YOU SO MUCH ON MAKING THIS VIDEO IM VERY NEW TO 3D PRINTING AN THE VIDS HELP OUT SO MUCH

You deserve way more followers. Resin is simple, but this is still a great to the point refresher. Thanks

LOL, the intro almost killed me xD. As for Resin sensitivity, we should respect it, I had by accident resin powder in my eyes from the model I was cleaning with a mini-craft tool , and this was even after it had been cured, I looked at the mirror and there was a huge blood clot on my cornea and surprisingly , I didn't feel anything , summary is Resin is toxic and it goes inside your body gradually thank's for the wise words though

Well explained. Thank you because I just bought one.

I wanted to start to do some resin printing for the first time so I happen to see your channel and I was impressed. I’ve been watching other videos to see what I would like to purchase and they had a lot of steps. With this product what would I need to make the resin to be ready for painting?

Nice mines coming today thank you for the video got a new subscriber

I didn't really want to like this video, but hope your all good now man 🙏🏻. I got the Anycubic mono 2 last week and just watched your video on the setup. Very informative and i'm going to set mine up this week. Will let you know how it goes Work safe buddy, from the 🇬🇧 🙌🏻

Just got my printer today! Thanks for the guide!

I just orders the mono x 6ks and the wash and cure 3.0. For the finely detailed items my filament printers can't handle. This series of vids has been great. Just out of curiosity, do you know what the difference is between the 3.0 and the 3 plus is? Thanks again.

Nice sir...can you tech me how to make own ring design custom for jewelry...thanks

Thank you for explaining so thoroughly. Its very helpful for a beginner like myself

FYI to all when leveling the build plate, dont do what this guy did. Your paper really shouldn't move, like at all. 🤡

Thanks CK. Not too different from the old Mono but always great to see a pro do it before breaking something!

Can't hear much over the background music

Background music too loud to hear you speak.

😘 'Promo SM'

Thank you for your video. It was really interesting, I was wondering if you felt this would be a good printer for jewelry prototyping? Not for casting just to see the design in 3D. Thank you so much Tiffany

Took delivery of my six KS last week, and it came with the screen protector already installed. I am curious as to why you set and then bump it up. I’ve never had an issue using the standard method of loosening the bolts dropping it down, holding the plate in place and tightening the screws then setting this Z equals zero. I use the same procedure with my three max and my original mono 6K and over 300 prints. None of the fails were due to my leveling procedure. 10 prints in (mostly 1/4 and 1/6 figures) Using the standard any cubic resin and I love this printer.!

love the site

I can't wait to see the finished product. I suppose I need to find something new to print. Thanks for the site for some new models!

"This is ONLY Phase 2 of Biden's border invasion plan, wait until Phase 4 begins" | Redacted News

Thank you!!!

Test print went well! Haven't had a chance to run anything else on it yet. I will start something this weekend.

nice

Wise words!

Wow! Thank you very much!

Congrats to the winner!

This is awesome I can't believe I won!!!! But, I want to pay it forward. Please give the printer that I had won to someone else.