Відео

Thank you

You have to configure IP address manually and must be same segment with your physical router. To configure IP address manually : configure system interface edit port(no) set mode static set ip xxx.xxx.x.x/x set role LAN/WAN set allowaccess https ssh ping next end

you can configure two separate IPsec VPN tunnels on the same interface.

its a tricky but yes. Since the EWC flash memory might not have enough space to store all AP images, you will need to host the AP images on external TFTP or SFTP server. this way you can ...........

It’s good to know that.

If DFS replications failed, the SYSVOL folder may not synchronize in modern AD. If you are using old or legacy replication. If SYSVOL replication broken, the folders will not appear on the secondary DC there other issue too. Network DNS, DISK SPACE. Permission and so on.

The file I downloaded is C9800-AP-universalk9.17.xx.xx

Thank you for your comment. Hmm! I'm not sure; it may vary by country. You can find the details at the URL below. www.cisco.com/c/ja_jp/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html

You are welcome. We can also use DDNS. But in this video I used public IP address. And internet access through the VPN tunnel.

@silasinfotech thanks bro,

Welcome

support.fortinet.com/welcome/#/

First of all you have to register new account to the fortigate support portal. Than, Follow along to the end of the video. support.fortinet.com/welcome/#/

thank yoi, why gui fortigate cant acces in browser? but if i ping ip can sending?

@fadilahputri5700 open cli > conf sys interface edit <your port no> set allowaccess https http next end

Thank you very much.

Thank you very much.

If there are no issues with migration, then yes, absolutely.

I’m glad it was helpful. For effective load balancing, static routes help in distributing traffic across multiple WAN links.

@@silasinfotech perfect thanks for absolute guidance

I am Glad it was helpful to you

Thank you.

Thank you very much.

Thank you for your comment. I will try to remove it.

You can download from Cisco official site. But you must have a "paid support service contract" with Cisco.

Thank you very much.

I am sorry for that.

Do you want to upgrade catalyst switch c9300L or EWC?

@@silasinfotech both, an ewc embedded on catalyst switch.

@jeffersonmonegro5707 Sorry right I don’t have a video for upgrading Cisco catalyst switch 9300L

Glad to know it. Thank you very much.

While depends on Actually what you want to do? Want to add to controller? If yes, then AP doesn’t joint to controller with some reason. If you want setup standalone. Then you did something wrong while setting.

@@silasinfotech AP's are already working with controller and are working fine but the led keeps on blinking. I want to know why the led is flashing and what does that mean. Is it for ios upgrade or any other issue

@igramz I am not sure, it may be insufficient power. If the led cycling red off green off blue off Or AP does not join properly to controller. www.cisco.com/c/en/us/td/docs/wireless/access_point/9120ax/quick/guide/ap9120ax-getstart.html

I haven’t created video about site-to-site vpn on Cisco router yet. But you can visit below’s url. www.firewall.cx/cisco/cisco-routers/cisco-router-vpn-dynamic-endpoint.html

@@silasinfotech Thank you so much for your response. I mean Site to Site VPN between Yamaha RTX1200 with Cisco devices?

Thank you for comment. Can you share the error that you got?

@@silasinfotech Last metadata expiration check: 21:06:11 ago on Fri Apr 19 13:36:01 2024. Package libblkid-devel-2.37.4-15.el9.x86_64 is already installed. Package libtasn1-4.16.0-8.el9_1.x86_64 is already installed. Package libxslt-1.1.34-9.el9.x86_64 is already installed. Package python3-gpg-1.15.1-6.el9.x86_64 is already installed. No match for argument: python36-devel Package tar-2:1.34-6.el9_1.x86_64 is already installed. Package zlib-devel-1.2.11-40.el9.x86_64 is already installed. Error: Unable to find a match: python36-devel

Thank you for comment. Plz click the link below for the video. Also don’t forget to like, subscribe, and share the videos of this channel. how to convert capwap to EWC Cisco 9120 Access Point? ua-cam.com/video/a2JMvZL3hOw/v-deo.html

I am sorry what you want to know exactly. If you mean your administration password. Then, that is the password you set during the installation.

Thank you for commenting At first setup Set the Ip address to new AP With same segment of your management network. Like … AP# capwap ap ip <your ip address> <subnet mask > <default gateway > Connect new AP to network environment Connect or access to EWC go to access point and new AP will be listed

yes you are correct. A: AWS System's Manager's [Patch Manager] allows you to automate patching, ensuring timely application of security updates. Thank you very much for comment.

If you migrate successfully to WS2019, next migration can be done by transferring FSMO role only. You don’t need manual interventions.

...... All is not as it seemed yesterday :-) I migrated the AD from Samba 4.10.16 to Widows server 2008 R2. After migration, AD is in WS 2003 ”domain functional level “ and working without any visible problem. HOWEVER, after starting the PC - the DNS servis is reporting Event ID 4013 - The DNS server is waiting for AD DS …… Event ID 4014 - The DNS server was unable to initialize Active Directory security interfaces. Check that the Active Directory is functioning properly and restart the DNS server. The event data contains the error. When I try rise the Domain functional level to 2008 or 2008 R2, AD becomes unavailable. Please, do you have any Idea how to solve this?@@silasinfotech

Can you share the screenshot ?

​@@silasinfotech drive.google.com/drive/folders/1EqPUXKGpEKagyA3du0QY-7nWjt3GLN_x?usp=sharing

sorry i did not notice the link you have share with me. Did you solve the issue?

Thank you for comment! Coming Saturday or next Saturday I will upload it.

Thank you !

I downloaded it from Microsoft official site. Can you send me screenshots?

@@silasinfotech Well, I think right now I've figured out my problem. There is a "ghost" server in the DNS records of my samba. I have deleted the server with samba-tool domain demote --remove-other-dead-server=[server hostname]. However, the DNS records for it are still there and now I cannot even run dcpromo on a new Windows virtual machine. It will go through all the steps but will not complete the replication process. I am currently trying to delete these DNS records from my samba.

@@Grellheist yon can delete or demote samba from windows domain. If you transfer sysvol and FSMO role

@@silasinfotech Yes, I can, but right now the problem is I cannot replicate the domain, only thing I could do is to create a new DC without replication. I will try to delete all records of this server through a RSAT, which I think will be easier.

Thank you for comment. 1. Migration from 2008 R2 to 2022 directly is not possible. You have to migrate to windows server 2012 R2 first. Then you can migrate to windows server 2022.

@@silasinfotech Thank you for your reply, and what about FRS sysvol? When migrate from 2008 to 2019 sysvol must be set on DFSR. Why didn´t you setup DFSR before promote 2019 and during promoting no error about sysvol. 🤔

Maybe one think on my mind: because samba doesn´t support FRS and DFSR protocol and during migrate from samba to windows AD it must copy sysvol manually. So when it create sysvol manualy at first time on windows AD so it must be created primary DFSR sysvol otherwise itś not possible promote Windows server 2016 and later.

@@lukaskrivda while migrating from 2008 to 2019 server DFSR is not supported. So you to upgrade or migrate 2012 or 2016. While migrating From 2012 or 2016 to 2019 DFSR automatically replicate.

Hello @@silasinfotech . I have promote Server 2019 but no sysvol folders. Sysvol working on WS2008 but on WS2019 not working. I need repair sysvol replication to new WS2019 and then demote Server2008. Can I copy folders manually to WS2019 like from samba to 2008 through robocopy? Thank you for your help

Thank you for comment. there are many reason to get (WERR_BADFILE) error. Network Connectivity, DNS and TIME Synchronization, User Account Permission, Antivirus & Firewall, if possible can i check smb.conf file?

@@silasinfotech Hey, youtube deleted my comment earlier. I have tried to redo everything from the beginning, and everything went smoothly (even DNS) until I changed my server's IP address. As soon as I've changed to the same address of the older AD, my DNS resolves the IP but doesn't save it. Do you know how to fix this? How did you configure your adapter?

@@silasinfotech Also, whenever I try to resolve the IP in the DNS, it resolves an IPv6 but it gives an "unknown error", and when I click Ok and Apply, it loses both addresses again.

@@Grellheist disable IPV6 and try it again.

@@silasinfotech IPV6 is already disabled in my network interface, but the problem persists. I am thinking that the DNS has some conflict with the old IP, don't know how else to explain this issue.

Thank you for comment. and sorry for the late reply overall you can control the domain. however it depends on your environment.

SSH connects to a particular computer while a VPN connects to a network