Відео

Excellet

How did you attach the arctic fan on the inner front of the case please

the jumper hack does not work on a reboot. for a more permanent fix, connect the memory fan connector pins 3 and 4 (tach) to the rear 90mm fan's tach pin 2 (tach), even on a reboot it will not display an error

I just found that for HP Z6 G4 the mem fan has 4 pins, which are: 1 for ground, 2 for 12V, 3 for RPM sense, and 4 for PWM control. Which pins should I put a jumper on in order to get rid of the 517 error? Thanks a lot! Your video is fabulous.

Thanks so much for sharing!

I just bought the stupid front fan kit, and I have a nVidia Tesla P4 installed (with its 3d printed fan shroud and that fan running off of SATA Power separately) and its still giving me the stupid front fan required in this configuration bios error. Does ANYONE know, or know where I can figure out how to disable this? Because I have the stupid fan and its STILL throwing it...

I have one with E5 1620 V3 and 32 gb and a K2200 Quadro. Goes very well. I might throw a 1650 in it. Unfortunately it has the 500 watt PSU.

does not work after reboot, unfortunately 😕

I just bought a HP Z840 on ebay which will be delivered in the next few days. It only has a HD. So I'm looking to get the fastest SSD to boot from. Do any NVmes work in these HP Z turbo drives? Are all the drives the same?

Thanks for watching your video. Is there any way to adjust the speed of the memory fan? I found that it still makes a lot of noise even when the temperature is not high.

Excellent stuff for us who took the hardware out of the z440 case and put it in a regular high airflow atx case, with 3x140mm fans. :)

Cool! But how did you find out that this is the way to do it? Just trying to learn something new...

Thanks , you r Good

Is the GTX 1080 running off the stock 400W PSU? I'm interested in doing a similar build myself

please show us front fan jumper connections bruh!

Interesting, this video never came up in search for Z240 stuff , found it when I ran across your z440 memory fan mod.... Z240 is a great machine, I set one up for my better half and works great! Same Xeon and running 4 sticks of 4gb =16gb which came with it . She did not care for the Asus Tuf GTX 1650 oc card I picked up in the price craziness last year, so recently updated the power supply to a Thermaltake Toughpower GX2 80+ Gold 600W , Comeap PSU adaptor and used Gigibyte GTX 1080 ... She really loves it , and it runs great . Now she wants bling , and it really does need better cooling , already added case fans and modded the case door with mesh venting, but worried about the hard drive bay cooling. Still rocking a 4tb mech drive and a 1tb mx500 ssd , gets hot in the drive bay cage. If it was me I would just stick a slim 92mm fan in the front of the drive bay air intake with the dremel and call it a day , but she thinks the OEM case is not flashy enough :) I like the carbon wrap and what you have done overall, if it was mine I would do the same. Got her on order a modern micro atx case with all the fans and argb stuff she wanted for a great price. Keep it up !! Subbed and liked !! :)

This will be great to use in a case swap and loading up all the udimm slots :)

Doesn’t work on my HP Z400

I just ordered the fan and housing. It was like $30 on ebay

worked for 9 x HP Z440, for one it's not :( , bios and all the other drivers are up-to-date. i will need to figure out what the hell is going on.

just what i needed. the memory cooling unit is 120 USD on ebay, and the message stops the boot on my hp z6 g4 workstation.

Fantastic tip. Just what I was looking for. Got hold of one of these last week. I can't populate all-the-slots. I have 8x *Gb sticks. 3 came with the workstation, and I bought 5 more. These work fine in any combination using 4 slots to the right of the CPU (from pov used in your video) and the left-most slot. If I put anything (even on its own) in any combination that includes the three slots immediately to the left of the CPU, I get a post error (beep and red flashing light). I am aware of the installation order, as shown on the inside of the cover. Whatever I put in those 3 slots causes a problem. All the memory sticks checked out and work alone and in combination with others (old and new). Have you seen this before?

Would I be able to remove the orange parts of the cases out and stack them? I think I'm gonna order regardless and if I can't get em out I'll just slice the hinge and stack em

Hey. What's the type of the jumper you're using to bridge these pins?

Good review

Hi, I have a quick question this fix worked pretty awesome when I shutdown and turn on the PC, but the error still appears if I reboot the PC, can you help me please to confirm if you face the similar issue? I’m planning to buy the fan baffle and dissemble it because I’m not using the HP case, any advise is appreciated.

Thank you for your effort, you saved a day!

GREAT TIP! I'm building a Z440 right now and having all kinds of CPU, Front LED/Power, system fan issues, but I'll go ahead and make your recommended pin jumpers because I have all 8 DIMMS populated with Kingston 32 gig ECC memory with NO mem fan shroud.

Hi, thanks for great vídeo and working Doug.

does that message that you need the shroud pop up at EVERY reboot? or just once? my guess is everytime, otherwise there would not need to be a workaround like you showed here. thanks!

Looks like a good kit.

Fun fact the PCB inside the SSD's case is pretty small and in most cases can be removed and run without the unneeded metal bits. I don't think they even need the 2.5 size case as a thermal solution. (though one could argue the 3.5 drive would make a much better heatsink then the original case if you can thermally connect the board to the 3.5 drive). It might have been easier to just take it out and mount in place of the original PCB on the 3.5 drive. Though you might still need to tap new screw holes and perhaps add some insulation between the board and the hard-drive case. EDIT: Unless you meant to make this as a usable adapter housing for any 2.5 SSD you come across and isn't dedicated to that one SSD you put in it. Then my idea wouldn't be as convenient in that case.

A honest review 😎

Nice review my man!!