- 475
- 271 404
crielio criel
Philippines
Приєднався 7 жов 2011
Thinking of creating a content and making video log is out of my league. I hate to listen to my voice on the video. Thinking much more to the viewers. But well, anyone will have its own uniqueness. I may not like my voice, or you may like or don't like my voice, the fact of the matter is i am just doing this for fun. Maybe in the long run i may or may not have a monetization on creating these videos but at least i have tried. Nobody knows what will happen in the future.
Currently, all my edits and videos are a crap but all of us start from scratch so we will never know. These things can be mastered over time. So yeah!
I hope you enjoy my videos and contents. Kind comments is appreciated!
Thanks for dropping by!
Currently, all my edits and videos are a crap but all of us start from scratch so we will never know. These things can be mastered over time. So yeah!
I hope you enjoy my videos and contents. Kind comments is appreciated!
Thanks for dropping by!
The teardown didn't need to be slowed down. Would have been great for those trying to understand their own gyro balls.
i am sorry for the mishaps with this video. I will be better next time.
worthless. mine developed a knocking sound, the teardown is so speeded up it is impossible to tell what parts might be involved.
yup.. i am sorry to hear that mate.
3:48 tôi ko cần tua nhanh
how do i fix it that could have caused it to drop it on the floor and then it didn't work at all
Same
@ I managed to fix it, if the plastic part is not broken, it works as before if you open the screws of the ball, remove the mechanism inside, put it back in place and close the screws, as in the video
@cnarefeorhan9321 thx I will try
Mine is vibrating so bad when i start to spin it plz hlp
how bad is the vibration? because small vibration is part of it.
@@crieliocriel it vibrates so much
@@meandmykuttus2574 let’s see.. have you tried prying it open? And look if there are loose ends?
I'd like to see this in real-time, no time lapse, so I can pause as I go.
This challenge is everywhere-
ReeeeeeeEEEEEEeeEeEeee
Nice try!
Useless! The most important part of the disassembly and you have speeded it up so that it is IMPOSSIBLE to see how to take it apart! What an utter waste of 10 minutes of my life!!! After removing the 2 screws (one each side) of the midway point HOW do you separate the 2 clear plastic halves to open up the insides?????
i am sorry if you feel that way.
Who does that anyways?
What about anything we need for holidays?
hey bro.. what do you mean?
Woi, unsay lasa?
same ra.. no changes
Naunsa mana doi?
na stuck sa pump..
Walker Betty Gonzalez Richard Garcia Jennifer
I'm in this school learning! Is: B.E.S.T. Name: Nutcha
Pls .. why does it sound increased and became louder than before .. much louder !!!Should It be greased?
yeah.. probably you need to do that.. just try it..
@@crieliocriel It didn't work .. grease made the movement hard
@@nooralbyati how much you put? It should be just like 2-3 drops
@@crieliocriel believe me not a single one
Best mic on the planet💀😭
Mine came with a lanyard like yours Im dumbfounded where can I insert it, there are no holes in unit to insert
you can just poke a hole on it.
@@crieliocriel thanks for that info, but idk why they would include one and would expect one to alter the device ?
@@KongKingman might have been a manufacturing error which QC missed. If they do have the QC.
@@crieliocriel thanks for reply. I since bought the “gyro stick” you put the gyroball on a “stick”
Beautiful vlog!😮 New subscriber now. Hopefully,we willbe friends and stay connected too😊❤❤❤
@@ronm.catadman5102 thank you! 🙏 My pleasure..
😢😢😢😢😭😭😭😭😭😭😭
this is gorrgeous trip! Crielio~😎
I have almost the same exact model of Gyro ball minus the lights and thanks to this video. I was able to repair my exercise Gyro ball. Thank you so much.
Tysm
Bro I don't know if you are professional at these stuffs but I want to tell you that those two black things you calling capacitors are not capacitors, its the electromagnet and the other thing that fits beneath it and rotates is a magnet and when it spins the electromagnet absorbs the electromagnetic feilds generated by the magnet to power the led. Its a simple thing but is created greatly. And the heavy thing that rotates is the actual gyroscope.
Help,i cant crack it open, i used flat screw, knife, nails and all failed
Just want to ask,the small white ring where to put?
I think it is place in the middle before putting back the two parts..
It's the nut that secure the clipper with the mechanism.
😆 lol
this guy speaks with one word / year!
Why the spring doesn't work if it's upside down?
what spring?
@@crieliocriel the arch, el resorte, la cuerda, the mechanical initial impulse.
Nice method and great outcome
Mines don’t light up😢
Конопля дает много дыма
it is a magnesium strip
kuyaw!
Tried everything won't open not with screwdriver throwing it knife spoon mine fell and now not works properly thats why i am trying to open please suggest
i just pry it open with flat screw. you can see the latches?.. try to open it at that part.
@@crieliocriel heyy thanks I opened and figured it out but don't know how to fix it my gyro ball moves left and right and makes a "tack" sound the steel rod the holds it is moving
Is there any alternative for white stencil ink
I think you can use marker..
Tanks for explaning the working off the gyroball. I was wondering it, and googled it, and that's how i end up on your film. 👍
Thank you!!!
I'm pretty sure those are inductors not capacitors, even though they look very similar to electrolytic caps. That would explain how it generates the electricity that powers the LEDs. So the "sensors" are the two inductors that generate electricity as the rotating magnets pass by.
Is this good 😮
yes it is.. so nice to look at..
bad video, i bought this model bet the instruction is very hard, your video is useless so send another video with noprmal speed pls
Thank you for your comment but i cannot do the normal speed because it took me 2hrs minimum just one video..
@@crieliocriel oh no
I enjoyed the video. But please don't speed up the parts where you disassemble and assemble, they are very important too. Thanks!
noted mate!
Why you speed up this so bad 😂
hahaha.. i figured.. =))
Did you know you put the wheels on backwards?
hahaha.. i just noticed.. hahaha
Bloody hell scammer of her is this true
What to do my gyro ball is not spinning after I cleaned it. What do I need to do for friction?
you can add a bit of oil,
@@crieliocriel mine doest have any plastic ring in between the case.
I saw ur video and im wondering how u managed to pull the ball open agter unscrewing it cause i tried what u did in the video
you need to use flat screw to punch through to it a little bit.
So quickly 😮
L1 and L2 are inductors with coils, when passing through the magnetic field these generate electricity. L is for inductor where as C would be capacitor which they are not.
"Promosm" ❣️
Génial ! <3😍🚀
So cool !! I wish I had a 3D printer...! The Tower looks AMAZING!!!
it took me around 15 days to put everything together including the ruined prints...