- 98
- 172 271
Sebastian Balos Tech Talk
United States
Приєднався 6 сер 2015
Festo ELGD-TB Tooth Belt Electric Actuator Walk Through. High Quality Product
ELGD-TB (standard design)
• Profile with a square cross section and sturdy drive elements for high feed forces
ELGD-TB-WD (wide design)
• Reduced profile height offers smaller installation dimensions for handling systems and applications that do not require such high feed forces
• 30% lighter, while rigidity and guide load capacity are still similar to the axis in standard design
Innovative guide technology
• Excellent rigidity and load capacity of the guide for higher loads in the same installation space
• Less vibration and smoother slide movement protect sensitive workpieces
• High speeds ensure short cycle times, and a very long service life minimizes downtime
Powerful drive elements
• High feed forces and acceleration for shorter process times
• Long service life and increased reliability reduce TCO
Innovative stainless steel cover strip solution
• Abrasion-free and clean surface protects workpieces from particles
• Minimized number of particles for use in cleanrooms
• Reduced ingress of dirt for use in harsh ambient conditions
Options:
• Extended or additional slide for higher axial and lateral torques and higher loads
• Two freely selectable motor positions at one end of the axis
Sealing air connection:
• Air is exchanged between the interior of the cylinder and the environment via the sealing air connection. This prevents negative pressure or excess pressure from
building up inside the cylinder.
• Application of slight negative pressure prevents the emission of particles
• Application of slight excess pressure prevents the ingress of particles
• Profile with a square cross section and sturdy drive elements for high feed forces
ELGD-TB-WD (wide design)
• Reduced profile height offers smaller installation dimensions for handling systems and applications that do not require such high feed forces
• 30% lighter, while rigidity and guide load capacity are still similar to the axis in standard design
Innovative guide technology
• Excellent rigidity and load capacity of the guide for higher loads in the same installation space
• Less vibration and smoother slide movement protect sensitive workpieces
• High speeds ensure short cycle times, and a very long service life minimizes downtime
Powerful drive elements
• High feed forces and acceleration for shorter process times
• Long service life and increased reliability reduce TCO
Innovative stainless steel cover strip solution
• Abrasion-free and clean surface protects workpieces from particles
• Minimized number of particles for use in cleanrooms
• Reduced ingress of dirt for use in harsh ambient conditions
Options:
• Extended or additional slide for higher axial and lateral torques and higher loads
• Two freely selectable motor positions at one end of the axis
Sealing air connection:
• Air is exchanged between the interior of the cylinder and the environment via the sealing air connection. This prevents negative pressure or excess pressure from
building up inside the cylinder.
• Application of slight negative pressure prevents the emission of particles
• Application of slight excess pressure prevents the ingress of particles
Переглядів: 29
Відео
Festo ELGD-BS Ball Screw Electric Actuator Walk Through (Premium Quality Product)
Переглядів 5114 днів тому
ELGD-BS (standard design ball screw electric actuator) • Profile with a square cross section and sturdy drive elements for high feed forces ELGD-BS-WD (wide design) • Reduced profile height offers smaller installation dimensions for handling systems and applications that do not require such high feed forces • 30% lighter, while rigidity and guide load capacity are still similar to the axis in s...
Festo VSNC Pneumatic Valve For Process Actuators Walk Through
Переглядів 18Місяць тому
VSNC pneumatic valves are pilot valves for single and double-acting quarter turn and linear actuators with a port pattern in accordance with VDI/VDE 3845, such as DAPS, DFPB, DLP. They can also be mounted on actuators without a NAMUR interface, e.g. diaphragm actuators, thanks to appropriate accessories such as a connection set. They are designed for the requirements of process automation. A me...
Festo Low Friction Pneumatic Cylinder Options Explained
Переглядів 61Місяць тому
Festo low friction cylinder options explained DSBC Standard DSBC-U DSBC-L DSBC-L1
Festo Pre-Configured Gantry System Ideas
Переглядів 49Місяць тому
Step 1: Select the type of handling system: Single-axis system Linear gantry Planar surface gantry Three-dimensional gantry Enter your application data: The Handling Guide Online will use your data to work out suitable solutions. www.festo.com/us/en/a/8031049/?autoShowConfigurator=true
Festo EMMT-ST New Line Of Stepper Motors. Brief
Переглядів 1332 місяці тому
Festo EMMT-ST Servo Motor • Two-phase hybrid technology • 3 flange sizes available: M = 0.25 ... 9.4 Nm • IP40 protection for motor shaft • IP65 protection for motor housing with connection technology Connection technology: • Simple connection technology (OCP: one cable plug) - hybrid cable: motor cable and connecting cable for supply and encoder in one • Plug can be rotated 310° Digital absolu...
Festo DRRS Rotary Actuator Walkthrough
Переглядів 3102 місяці тому
Festo DRRS pneumatic rotary actuator. • Rack-and-pinion principle • Extremely accurate in the end positions • High load-bearing capacity for the bearing, precise and backlash-free • High mass moments of inertia • Defined interfaces • Supply ports at both ends • Slots on both sides for mounting proximity switches • Choice of mounting options • Perfectly suited for handling applications
Festo VZQA NO/NC Pinch Valve Walk Through.
Переглядів 2005 місяців тому
The Festo VZQA pinch valve is a 2/2-way valve used to control liquid and powdery media, solids as well as mixtures of substances. • Filling systems • Dosing and weighing systems • Powder coating systems • Suction and compressed air control units • Pneumatic conveying systems • Sandblast systems Examples of flow media: • Granules • Powder • Dust • Liquids containing solids • Fibrous products • H...
Festo VTEP Proportional Pressure Regulator Valve Bank Walk Through
Переглядів 6819 місяців тому
The new VTEP proportional valve terminal expands the Controlled Pneumatics product portfolio. It boasts an impressive and extremely compact multi-channel pressure control with a low flow rate. Up to 5 valves with 10 working channels can be controlled in parallel with pressure and vacuum. VTEP is free of copper, nickel and zinc, making it ideal for many industries such as electronics and semicon...
Festo VPPI Proportional Pressure Regulator Brief
Переглядів 2,6 тис.10 місяців тому
The valve VPPI is a directly actuated proportional pressure regulator that uses two proportional 2/2-way valves as a basis. The valve regulates a pneumatic pressure to an electronically defined value. This makes use of cascaded closed-loop control of pressure/motion and current. Control is provided using an analogue current or voltage signal, or alternatively using a digital pattern (voltage ve...
Festo Pneumatic Actuator Ideas Overview
Переглядів 86310 місяців тому
DSNU-S compact Pneumatic Cylinders DGTZ Flat Twin Pneumatic Cylinders DLGF Flat Pneumatic Cylinder VFOE Pneumatic Flow Controls VUVG compact Pneumatic valves DPDM compact Pneumatic Cylinders DGST compact Pneumatic Slide DRRD Rotary Cylinder DHPS Parallel Pneumatic Griper MS series Air prep SDBT-MSX prox sensors VAS suction cups PUN-H Tubing OVEL Vacuum Generator VTUG valve manifold CPX-AP-I I/O...
Festo VTUX Next Generation Of Pneumatic Valves. Brief
Переглядів 26710 місяців тому
• Compact design with low overall height and width • Manifold sub-bases with different widths for different flow rate with the same valves • Flow rate up to 670 l/min • Flexibly configurable push-in fittings as a cartridge, easy to exchange in just a few simple steps • Wide range of electrical connection options for multi-pin plug: Sub-D, ribbon cable or spring-loaded terminal • Connection to t...
Festo Semiconductor Manufacturing Ideas
Переглядів 10311 місяців тому
Various Festo Components used to show the transfer of wafers.
Festo DGSS Mini Slide Pneumatic Cylinder Walk Through
Переглядів 76711 місяців тому
• Compact Pneumatic drive/cylinder • Optimum price/performance ratio • Slide and yoke plate as a single component • Excellent positioning accuracy • Precise and resilient rolling bearing guide • Operation possible without additional cushioning elements. • Optional: stroke adjustment and external cushioning using accessories • Very flexible thanks to wide choice of mounting and attachment option...
Festo ELGG Large Electric Gripper Application Ideas
Переглядів 45511 місяців тому
Festo ELGG Large Electric Gripper Application Ideas
End User Walmart. OEM Symbotic. Smart Palletizer
Переглядів 367Рік тому
End User Walmart. OEM Symbotic. Smart Palletizer
Festo VTEM (Motion Terminal) Bottle Filling Ideas
Переглядів 228Рік тому
Festo VTEM (Motion Terminal) Bottle Filling Ideas
Festo VTEM (Motion Terminal) Pneumatic Pick And Place Ideas
Переглядів 132Рік тому
Festo VTEM (Motion Terminal) Pneumatic Pick And Place Ideas
Festo VTEM (Motion Terminal) Pneumatic "APP" Ideas
Переглядів 133Рік тому
Festo VTEM (Motion Terminal) Pneumatic "APP" Ideas
Festo VTUG Cabinet Mount Pneumatic Valves Walked Through
Переглядів 434Рік тому
Festo VTUG Cabinet Mount Pneumatic Valves Walked Through
Festo DSNU Pneumatic Cylinder Basic Set Up
Переглядів 2,5 тис.Рік тому
Festo DSNU Pneumatic Cylinder Basic Set Up
Festo VTEM (Motion Terminal) "Selectable Pressure Level" App Ideas
Переглядів 50Рік тому
Festo VTEM (Motion Terminal) "Selectable Pressure Level" App Ideas
Festo VTEM (Motion Terminal) "Selectable Pressure Level" App Ideas
Переглядів 87Рік тому
Festo VTEM (Motion Terminal) "Selectable Pressure Level" App Ideas
Festo Product Portfolio Example. Battery Production
Переглядів 50Рік тому
Festo Product Portfolio Example. Battery Production
Festo Pneumatic Rotary Cylinder DRVS Pick and Place Ideas
Переглядів 1,5 тис.Рік тому
Festo Pneumatic Rotary Cylinder DRVS Pick and Place Ideas
Festo VTEM (Motion Terminal) Packaging Ideas.
Переглядів 343Рік тому
Festo VTEM (Motion Terminal) Packaging Ideas.
Festo Pick and Place Ideas Along with SPAN Pressure Monitoring
Переглядів 127Рік тому
Festo Pick and Place Ideas Along with SPAN Pressure Monitoring
Festo Electric Actuators Used to Pelletize
Переглядів 72Рік тому
Festo Electric Actuators Used to Pelletize
Fake news
Sick is good but lack learning documents
28323 Chelsey Row
Cool, did you make this animation?
Bridgette Cove
Ellsworth Fork
🎉thank you 🙏
Really good video, BTW in the nut shell, the D and E stands for the different safety level, from my understand, the D product should performance as the PLd , similar catalogue 3, and the E product should performance as the PLe, similar as the catalogue 4. but well use what kind of the safety valve can't be determine by the engineer for most of the time by personal idea, but once get in touch with system system, it always need to calculate the system failure property and choose the components which can improve the system to reach to the ISO/DIN standard as well as the customer specific requirement for individual projects. Hope for more knowledge sharing, thank you for the effort :)
The PLd and PLe difference is not entirely accurate. The MS6-SV-D can achieve category 4, PLe. You can achieve this by adding a 3rd sensor (S3).
Hallo Sab, my question, I have MS6, and maximum pressure is 6 bar. But why ms6 only get 2,4 bar??? Happen after safety instruction fault. Any related with neca ?? Or you have comment? Please..
Hello, It might have something to do with the soft start aspect to this valve. When a machine starts up the valve will slowly pressurize the system. Once the system gets to a certain pressure, the soft start goes full open. It is possible that the soft start is not able to reach its threshold to fully open. This can happen if there is an air leak downstream. You can try to troubleshoot this by disconnecting the rest of the system and just blocking port 2 at the valve. it should get to 6 bar if you do this test. If it does not then there is more to this problem.
Saya ada masalah master Kadang angin sering rendah itu di setting apa ya Padahal angin masuk 6bar Dilayar parameter sering keluar alarm pressure to low Tolong dijawab ya Terimakasih
Di gauge nya menunjukan barpa bar dari 6 bar yg masuk?
mrb seçim yapmak için stede liste varmı
Hi Can you share more info on this. Is it a concept or implemented?
The video is for ideas, but Festo is already very active in this sector. I would recommend reaching out to your local Festo location for more detailed information.
I need festo pressure sensor .....Can you sell?
What is the pump name?
Search "VN" on www.festo.com.
This is awesome Sebastian! Pharma industry can use this technology in a big way!!
its a great set up! Cheers!
Plz prepare setting of Festo SOPA sensor
😂 'PromoSM'
Kak simulasi cara servis perawatan oli untuk tabung nya dong
Hey, I'm facing a problem regarding the difference between these two, as the enigneering for my project was done considering the MS6-SV-D and now the one installed and which I have to work with is the MS6-SV-E. Does it only come to the wires coming down from 4 to 1 (ignoring the one related to the pressure sensor) ? Is it as simple as wiring I/O EN1 & EN2 to the allocated outputs of our safety PLC ? Does the self-check feature makes up to the perfomance level on its own ?
Awesome!
It's download the Solidworks, isn't it?
Saludos ING, respecto al producto DRRD , su movimiento se logra con una electroválvula servo o proporcional y su lógica de control, cómo sería????, Gracias y mucho éxito, saludos y mucho éxito Gabriel Luna técnico en mantenimiento Electromecanico
ING saludos cordiales, lo felicitó es genial este vídeo informativo gracias y mucho éxito, inspirador para proyectos de mejora continúa, gracias y mucho éxito Gabriel Luna técnico en mantenimiento Electromecanico
Cool, Did you do the render?