- 12
- 23 431
SsgtStretch
United States
Приєднався 20 лют 2024
I'm a welder and a maker join me on this adventure of learning how to make stuff, less talking more building.
Unboxing and Setup OUTLAW 195 Engine-Driven Stick Welder from Harbor Freight
In this video I unbox this welder-generator put everything together and weld with it. If you're interested in learning more watch the video and find out the good and the bad from someone making an honest video. And watch out for cats, they're everywhere!
I install the wheel kit, change the oil, fill the gas tank and test the welder and the generator.
I purchased this welder generator with my own money, I'm not sponsored. I paid full price.
- - - if you are a member of the "inside Track Club" at Harbor Freight it's $300 off until January 2nd, 2025 !!!
www.harborfreight.com/outlaw-195-engine-driven-stick-welder-with-co-secure-technology-59692.html
This VULCAN® OUTLAW™ Engine-Driven Stick Welder uses inverter technology to deliver 195 amps max. DC welding output for smooth, high-quality welds.
-Powerful 13 HP, 420cc PREDATOR® engine for reliable performance
-6.5 hours runtime at 50% load
-CO SECURE® technology automatically shuts down the engine for safety when harmful levels of carbon monoxide are detected
-Electric start with manual backup, 12V battery included
-Digital display for fast, easy weld setups
-Includes 12 in. wheel kit for easy jobsite portability
-Thermal overload protection extends welder life
-Includes both 120V and 240V outlets
I install the wheel kit, change the oil, fill the gas tank and test the welder and the generator.
I purchased this welder generator with my own money, I'm not sponsored. I paid full price.
- - - if you are a member of the "inside Track Club" at Harbor Freight it's $300 off until January 2nd, 2025 !!!
www.harborfreight.com/outlaw-195-engine-driven-stick-welder-with-co-secure-technology-59692.html
This VULCAN® OUTLAW™ Engine-Driven Stick Welder uses inverter technology to deliver 195 amps max. DC welding output for smooth, high-quality welds.
-Powerful 13 HP, 420cc PREDATOR® engine for reliable performance
-6.5 hours runtime at 50% load
-CO SECURE® technology automatically shuts down the engine for safety when harmful levels of carbon monoxide are detected
-Electric start with manual backup, 12V battery included
-Digital display for fast, easy weld setups
-Includes 12 in. wheel kit for easy jobsite portability
-Thermal overload protection extends welder life
-Includes both 120V and 240V outlets
Переглядів: 1 565
Відео
4x8 Trailer Upgrades - Harbor Freight - DIY - Welding and Fabrication
Переглядів 1,4 тис.4 місяці тому
This is the second part where I weld more structure into it. There's an extreme amount of grinding so I can weld and a lot of welding And at the end there's a cat. The trailer is easy to put together but I'm adding more to it because I want it to be stronger. Harbor Freights HAUL-MASTER 1720 lb. Capacity 48 in. x 96 in. Super Duty Folding Trailer Video is not sponsored I purchased this trailer ...
Harbor Freight - HAUL-MASTER 1720 lb. 4x8 - Super Duty Folding Trailer
Переглядів 4 тис.5 місяців тому
Unboxing and assembly of Harbor Freights HAUL-MASTER 1720 lb. Capacity 48 in. x 96 in. Super Duty Folding Trailer Video is not sponsored I purchased this trailer with my own money. www.harborfreight.com/1720-lb-capacity-48-in-x-96-in-super-duty-folding-trailer-62671.html This super duty utility trailer is designed for carrying heavier loads. Add your own planking to create a heavy duty hauler. ...
It's easier than you think
Переглядів 1399 місяців тому
Just fixing some bearings that were destroyed because of my own carelessness. Mistakes were made, but I learned a lot in the process. This (mini)motorcycle has been heavily modified after I got it from Tractor Supply. Massimo MB200S Mini Bike Blue, Y180200317 www.tractorsupply.com/tsc/product/massimo-mb200s-mini-bike-blue-y180200317 The new Massimo MB200S is a sleek & powerful mini bike. Now wi...
Harbor Freight, Pittsburgh Roller Seat
Переглядів 3329 місяців тому
From Harbor Freight, Pittsburgh roller seat unboxing and assembly A simple rolling shop stool with adjustable height. Super easy assembly, just put everything where it goes and yes sit on it, that's it, you're done. you now have a rolling chair. Not sponsored purchase with my own money. www.harborfreight.com/pneumatic-adjustable-roller-seat-46319.html PITTSBURGH AUTOMOTIVE Pneumatic Roller Seat...
The kids scored it a 10 out of 10 #4
Переглядів 2,5 тис.9 місяців тому
The final episode of the barrel train build. This was a lot of work, but the smiles on those faces made it completely worth it.
Super Strong!! Yet Simple Design - Barrel Train #3
Переглядів 8419 місяців тому
Finishing the welding and mounting the barrels. Join me on this adventure of trying to figure out what I'm doing. I have no plans but I must succeed. In this episode we cover making brackets and attachment points for the barrels and cut out the holes. Part 1: ua-cam.com/video/pfiHMtIjpiU/v-deo.html Part 2: ua-cam.com/video/V3YmedYArjo/v-deo.html Part 3: ua-cam.com/video/05WwM-XOvLc/v-deo.html
Now I'm Getting Somewhere, I think... #2
Переглядів 1,8 тис.10 місяців тому
Mounting the wheels and axles and filling in some holes in the frame. Join me on this Grand Adventure trying to figure out how to make a barrel train with no instructions. Part 1: ua-cam.com/video/pfiHMtIjpiU/v-deo.html Part 2: ua-cam.com/video/V3YmedYArjo/v-deo.html Part 3: ua-cam.com/video/05WwM-XOvLc/v-deo.html
It looks like glowing orange juice
Переглядів 16710 місяців тому
TOAUTO Upgraded Gold Melting Furnace Coins and ingots Pour Trying to make coins for the upcoming eclipse in April. A lot more failures than there were successes. So I just turned everything into ingots.
Fume Extractor for Welding
Переглядів 79310 місяців тому
I needed a fume extractor to help keep the smoke out of my shop. It's not the prettiest but it's certainly functional and cheap.
More AIR - Less Noise - MCGRAW 29 Air Compressor - How to Set it up
Переглядів 9 тис.10 місяців тому
In this video I'm unboxing my new Harbor Freight air compressor and comparing it to my old one. MCGRAW 29 gallon, 1.8 HP, 165 PSI Oil-Lube Vertical Air Compressor It also shows how to put the wheels on, the air filters, oil, and how to perform the break-in. www.harborfreight.com/29-gallon-18-hp-165-psi-oil-lube-vertical-air-compressor-58507.html This MCGRAW® 29 gallon, 165 PSI Oil-Lube Vertical...
Making a barrel train with a CNC plasma cutter #1
Переглядів 1,1 тис.10 місяців тому
Have you ever seen a better way to make train connections? Let me know in the comments how you would do it!!! I'm always willing to learn a better way. Simple cutouts and bends and weld back together, no extra parts needed. Part 1: ua-cam.com/video/pfiHMtIjpiU/v-deo.html Part 2: ua-cam.com/video/V3YmedYArjo/v-deo.html Part 3: ua-cam.com/video/05WwM-XOvLc/v-deo.html
It seems quite nice. Does it run on diesel or gasoline?
gasoline
@SsgtStretch thank you for the reply and the review.
this is great, much appreciate the post!
Thank you for creating this video. Much appreciated
How do you ground the welder to the 🛻 or trailer? If you’re using it in the truck 🛻 or trailer?
The generator comes with a grounding wire and has a grounding lug built in, then you have to use a sheet metal screw or a bolt and make the connection Somewhere on the frame of the trailer or the vehicle. Directions are included in the manual when you purchase the generator. You can also find the manual for free on Harbor Freight website for the welder generator.
manuals.harborfreight.com/manuals/59000-59999/59692-193175478719.pdf page 14
Did you have to ground the generator I don’t wanna end up electrocuting myself after welding
No. Even though the manual says you need to have every generator grounded no one does and nobody has any problems. If you mount it to a vehicle or a trailer I would ground it to the vehicle or the trailer if that's where it's going to stay but if you're keeping it on its Wheels you don't need to ground it.
The issue with Harbor Freight trailers is the axle and tires can only handle so much weight. The more steel you add to it, the less carrying capacity you have. What does your finished trailer weigh?
My car is only rated to pull 1500 lb Max. the axles rated for 2000. Each tire is rated for 1100 lb each. Honestly if I put more than a thousand pounds in my car struggles because it's very weak. I mostly building this to pick up the random go cart or generator that needs fixing. When I'm done it might weigh 450 lb. The trailer can handle much more weight than what my car is capable of pulling with its tiny 2.3l 4 cylinder engine/ 153 horsepower... ish
I appreciate the work you put into the build. I probably have the same motor in my 2005 Ford Ranger and the limits in hauling power. I bought the 1750 lb HF trailer because the smaller one wasn't available. Keeping it as lightweight as possible is my goal. While beefing it up was on my mind as well, it just isn't going to be hauling more than 1500 lbs. If I decide I won't be using the folding function, I can see adding some welds. Cheers
Is that just flat stock across the top of the trailer for added support?
It's two and a half inch angle iron with parts of it cut out so that it fits in between the slats
Cool :)
How wide outside of wheels?
about 25"
Do you mind checking dimension outside of wheel width l like to see if it will fit?
about 25"
How many amps on 110 does it draw?
1900w 8.26 amps
Excellent work. Great video. Love the trailer.
I bought one a little while back for my ATV and dump runs. Works great. Mine is actually a 5x8 so wider than the HF but same trailer otherwise. Decked it with 3/4” pressure treated plywood and installed 6 heavy duty recessed D ring tie downs with over sized backing plates which allowed them to overlap on the frame rails. That puppy ain’t going anywhere.
Nicely done .
No, you're my hero.
Nice video of the build
Thanks!
Great video, even better with more ratchet and impact wrench sounds
Nice Jack stands. Where'd you get em?
Seach for: Vevor Pipe Stand - 2-Ball Transfer V-Head - 2500 lb Capacity - Adjustable Height 20-37 Inches
@@SsgtStretch Thank you!
Was gonna ask the same thing! They look sweet!
Do you happen to know the psi on the tires?
80 psi cold
Thank you VERY much for this video. I was on the fence about buying one and you just gave me the final push I needed. Awesome job great video. THANK YOU
Glad I could help
Tell me about your plasma please? I NEED IT!
Arcdroid plasma cutter
arcdroidcnc.com/products/arcdroid%E2%84%A2-cnc-table-top-plasma-robot?variant=42743036543231¤cy=USD&gad_source=1&gclid=Cj0KCQjwvb-zBhCmARIsAAfUI2ttDJi1nxhu7d_zXpeJC8V5LgHQXS7yC1QZGoKO1ah_pDq3kvKmeLkaAqFgEALw_wcB
Right now they have an open box one for 225$ or the door, but only 5 days warranty, so tempted to thats about $380 off
It's always good to get them when they're on sale
Great Video. Did you buy the Extended Warranty?
Yes I did
@@SsgtStretch You're going to need it. Their junk!!
No, I have had a harbor freight compressor for years and it has held up fine on job sites
How are you liking the 29gal compared to the 20? I have the same 20gal now and just got the 29 yesterday. So far I like it. So much quieter too!!
I love it
Does your hour meter run when plugged in but motor not running?
the hour meter only runs when the motor is on. mine has been on for weeks but hour meter is at 3 hours so far.
I would make it out of 2X4s much easier, quicker and cheaper
Happy building
@@SsgtStretch it takes 9 months for baby 2 be born, OMG this is very close, i posted 8 months ago
Is this a 2 stage compressor?
No, just a one stage
Great video
6:05 What inline oil/air separator are you using if I may ask? Thanks!
CrocSee C1.8C.027 1/4" NPT Thread 26CFM Automatic Drain Air Compressor Compressed In Line Particulate Moisture Water Trap Filter Separator with Mount
Does anyone know if it can be wired to 220V?
Yes it can be wired 220v
Thanks for sharing!
Thanks for watching!
Just bought one. Your vid is very helpful with setup