- 245
- 1 437 083
Axkid
Sweden
Приєднався 9 тра 2016
Step into the heartfelt journey of Axkid, where safety, innovation, and passion helps to secure our most precious treasures - our children.
From the heart of Swedish engineering in Gothenburg, Sweden, Axkid was born in 2009. Our story is one of dedication to safety, blended with a genuine desire for children's security. We're not just a company; we're a force fueled by knowledge and determination, unafraid to challenge norms and pioneer new horizons.
Our dedication is about setting new standards for child traffic safety which resonates in every recommendation for rear-facing travel.
Our solution? Rear-facing travel for as long as possible. It is a principle we stand by, because we refuse to compromise on the safety of our children.
From the heart of Swedish engineering in Gothenburg, Sweden, Axkid was born in 2009. Our story is one of dedication to safety, blended with a genuine desire for children's security. We're not just a company; we're a force fueled by knowledge and determination, unafraid to challenge norms and pioneer new horizons.
Our dedication is about setting new standards for child traffic safety which resonates in every recommendation for rear-facing travel.
Our solution? Rear-facing travel for as long as possible. It is a principle we stand by, because we refuse to compromise on the safety of our children.
Modukid Infant 2 - Seat Belt Attachment
How to securely install the Akid Modukid Infant 2 car seat. 👶
📌 Step-by-Step Guide:
1. Place the car seat rear-facing in the preferred seat of your car.
2. Pull the seat belt out from the seat belt retractor of the car and place it over and around the baby car seat.
3. Thread the seat belt through the green belt paths on the baby car seat, one on the back-side and two on the front.
4. Click the seat belt into the buckle firmly and test the latch to ensure it is locked.
5. Tighten the seat belt thoroughly by pulling the seat belt up towards the seat belt retractor, eliminating any slack.
🔔 Remember to always consult the manufacturer’s manual to ensure correct installation. Safety is key for your little one.
🔗 Explore More Axkid Products: axkid.com/
📌 Step-by-Step Guide:
1. Place the car seat rear-facing in the preferred seat of your car.
2. Pull the seat belt out from the seat belt retractor of the car and place it over and around the baby car seat.
3. Thread the seat belt through the green belt paths on the baby car seat, one on the back-side and two on the front.
4. Click the seat belt into the buckle firmly and test the latch to ensure it is locked.
5. Tighten the seat belt thoroughly by pulling the seat belt up towards the seat belt retractor, eliminating any slack.
🔔 Remember to always consult the manufacturer’s manual to ensure correct installation. Safety is key for your little one.
🔗 Explore More Axkid Products: axkid.com/
Переглядів: 292
Відео
Axkid Spinkid - How to reattach textile
Переглядів 4877 місяців тому
🎥 In this tutorial, we will guide you through the process of reattaching the textile to your Axkid Spinkid car seat. 👶 📌 Step-by-Step Guide: 1. Begin by inserting them through the holes on the front of the car seat. In the back, open the plastic cover and hook the to ends of the straps of the shoulder pads together. In the front, button up the shoulder pads around the straps of the seat belt. 2...
Axkid Spinkid - How to remove textile
Переглядів 5607 місяців тому
🎥In this tutorial, we will walk you through the process of removing the textile from your Axkid Spinkid. 🚗 📌 Step-by-Step Guide: 1. Remove the baby inlay. 2. Loosen the internal seat belt for the textile removal process. 3. Pull the headrest as far up as it goes, creating space for easy textile removal. 4. Starting from the top of the headrest, gently peel off the textile from the sides. The te...
Axkid Modukid Infant Installation video
Переглядів 5127 місяців тому
🚗👶 Start your family's journey with Axkid Modukid Infant 2! A car seat where safety and comfort meet practical everyday life, for new parents. 🌟 Axkid Modukid Infant 2 is carefully designed to protect your newborn on every journey. High safety combined with comfort . 👉 HIGHLIGHTS: *Adaptable to Strollers: Easily attach the seat to your stroller for smooth transitions from car to walk. *Lightwei...
Axkid Movekid Installation Movie
Переглядів 18 тис.9 місяців тому
Axkid Movekid: A compact, innovative car seat designed for your child's comfort and safety. 🚗🛡️ 🌟 Axkid Movekid is more than a car seat; it's a part of your daily parenting adventures. Offering extended rear-facing up to 36 kg (125 cm), it ensures enhanced safety on every trip, adhering to the highest safety standards. 👉 HIGHLIGHTS: *Tested and approved by the Swedish Plus Test: Movekid assures...
Axkid Minikid 4 - Presentation Movie
Переглядів 7 тис.10 місяців тому
Axkid Minikid: The Ultimate Car Seat for Safety and Comfort 🚗👶 Unlock the world of supreme safety with the Axkid Minikid! This remarkable rear-facing car seat is not only Swedish Plus tested but also approved for an impressive 36kg and up to 125cm, ensuring that your child travels with maximum safety and comfort on every journey. 🌟 👉 HIGHLIGHTS: *Extended Rear-Facing: Learn why the Axkid Miniki...
Axkid Envirokid Installation
Переглядів 1,1 тис.11 місяців тому
Axkid Envirokid Installation. 🔧 Elevate your child's journey with our Envirokid and Envirobase that ensures comfort and safety for your child. 🚗🧒 Installing our Envirokid with base is easy and straightforward where the base effortlessly attaches in the backseat of the car using ISOFIX connectors. The car seat itself clicks into the base and is securely fastened when the red indicators turn gree...
Axkid Enviro Collection Product Presentation
Переглядів 31511 місяців тому
Axkid Enviro Collection - Product Presentation Let us present our new collection bundle - The Enviro Collection - consisting of a base and two car seats giving you comfort, adaptability, and convenience combined! 🚗 👶👦 One Base, Multiple Solutions: With a single ISOFIX Envirobase, seamlessly switch between the Envirobaby for newborns and the Envirokid as your child grows. Simplify your life with...
Axkid Envirobaby Installation
Переглядів 67611 місяців тому
Axkid Envirobaby Installation 🔧 Start Your Journey Right with the Enviro Baby. 🍼🚗 The Envirobaby seamlessly clicks onto the Envirobase in your car or directly onto most stroller brands (adaptors may be required). Effortlessly transition from car to stroller for maximum convenience. And of course, the Envirobaby can be installed using the car seat belt. 🌟 Don't compromise during those crucial fi...
Axkid Angle Adjusting Wedge
Переглядів 2,2 тис.Рік тому
Axkid Angle Adjusting Wedge This wedge bridges the gap between the car seat and the vehicle's seats, ensuring a better slope for maximum comfort. It's important to note that the car seat's angle should not exceed around 37 degrees. This practical accessory is designed to be compatible with the Axkid Minikid and Axkid Move car seats, and it comes in dimensions of 17 cm x 23 cm.📏 With the angle a...
Axkid Minikid 3 change seat cover
Переглядів 1,1 тис.Рік тому
Axkid Minikid 3 - change seat cover. 🔧 How to change the car seat cover on the Axkid Minikid 3. The Minikid 3 car seat cover is equipped with zippers in strategically placed places which makes the removal extremely easy and smooth. The car seat cover is machine washable in 30 degrees celsius. 👉Highlights: *Easy removal: Zippers make the removal of the car seat cover easy and effortless. *Machin...
Installation Axkid Cooling Pads by Aeromoov
Переглядів 236Рік тому
Installation Axkid Cooling Pads by Aeromoov
159 Price Union
4420 Boehm Loop
322 Metz Stream
2136 Jennie Valley
Wer denkt sich bitte so etwas aus? Kann mir jemand einen vernünftigen Grund nennen, das Ding nicht sofort zurück zu senden? 😮
27511 Fisher Inlet
Thank you
I'm confused I thought the rear of the kids car seat was meant to be on the edge if the car seat... please advise. I desperately need to tilt my car seat more so my little can attempt to sleep
I'm not expert but my understanding is it shouldn't be any further out than the edge of the seat but it's ok if it's closer to the backrest of the main seat
for the parents going crazy on this tuto and the seat full of vomit... you"re not alone!
Sehr schlecht die Kopfstütze schnell zu ändern
Can you put it in the front seat ?
The leg doesn’t reach the floor of the car, what to do?
Hi what is the difference between this seat and the modukid and modukid base please?
what kind of rear-facing car seat straps in where there is a foot clearance between the car seat and the seat?
that seats set for the height of the child to allow for the leg room, it wont change the basic physics
This video would be more helpful if it was a bit slower and had comments :)
Hi, does the headrest stay in the unlock position to do this every time or should you be locking it once the child is strapped in? Thanks
One is wearing the car seat belt, and the other one is actually strapped in the safety harness of the car seat.
the belt doesnt stop the head whipping forward, its basic momentuem and physics
Is this good for tall toddlers?
Can the shoulder pads come down further on the strap? Mine sit too far back and there is no info anywhere on this?
Is this the same as doing it just for the one?
Hi! What is the diference between Minikid 3 and 4. Is the fourth a new model that reemplace the other? Thanks
Thank you for your question - Here is a great article explaining the main difference between the Axkid Minikid 3 and the Minikid 4. axkid.com/safety/differences-minikid-3-and-minikid-4/
There's a better headrest, it keeps head while child is sleeping much better than the previous one.
Bra att ni visar hur man sätter tillbaka klädseln.
Dziecko nie powinno jeździć że smoczkiem w ustach
Piece of crap, FU
Is anyone able to explain what the results are?
It shows that the rear facing seat protected the child better then the forward facing seat did the fact the dummies head shot forward into the lap in the front facing seat shows its dangerous when a child is under 4 or even under 6 and is forward facing while restrained by the 5 point harness the head shoots forward the vertebrae in their necks are not fully fused and seperate and internally decapitates the child if they are not old enough tall enough heavy enough to sit forward facing they could die in a crash its proven having your child rear facing as long as possible such as 7-8 years old is best some seats even rear face to 36kg now so there's no excuse only poor excuses to have your child forward facing before 7or 8 years old
@@jajangmyeon516thank you for this. I have tried to get my ex to keep our 4 year old rear facing but because he sees it as inconvenient for him so changed his car seat to forward facing again. He is a very selfish/self-centred person anyway so i am not shocked anymore though disgusted.
@@ao906 sounds like a call to cps if he didnt listen
When you show the move, I think it's the move, you show the wedge but what's the point when the move has its own wedge sort of thing? Also when leaning on the wedge in this video you don't have the seat forwards enough so it's on the edge of the seat like we are meant to install it? This confused me more rather than helped me
Hi, this seat is not available in the Czech republic, please why is it? And do you have some similar model now? Thank you!
Witam. Czy można zamontować ten fotelik również bez ISOFIX a? Tzn. my w samochodzie mielibyśmy tą bazę z isofixem a jak komuś z rodziny przekazalibyśmy małą czy oni sam fotelik zamocują na pasy bezpieczeństwa bez tej bazy?
Was auch noch ganz wichtig ist immer die Kindersicherung in der Autotür rein sowie die Kindersperre in den Fensterhebern.
Lutningskilen är på tok för smal för benet på stolen. Det var bortkastade pengar.
Hej Robin! Så ska det givetvis inte vara. Skicka ett meddelande till oss i någon av våra sociala kanaler eller maila till support@axkid.com för att få hjälp med din lutningskil.
ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
이런 고정방법의 유아 카시트는 어떨런지요. 차량의시트와 일체감이 뛰어납니다. ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
이런 고정방법의 카시트는 어떨런지요. ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
이런 고정방법의 카시트는 어떨런지요. ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
ua-cam.com/video/J8wPFBmT-Ts/v-deo.html
It has a very high searing position. Its not suitable for toddlers 9-15 kg in a Merdes E class..
There’s a wedge from axkid that adjusts the recline
bpx9e vum.fyi
Was war der Hintergedanke dieser umständlichen Variante, wie die Kopfstütze verbaut ist? Das hätte doch ebenfalls sicher, aber besser zum Verstellen konzipiert werden können. 😕
Thanks for nice instructions, i just brought this item and after installation it feels like it's little shakey like a loose fit. Any idea what went wrong 🤔.
Same thing! The carseat wobbles on the base. Have you found a solution? Is it maybe expected to be like this? I find it odd that is so well regarded yet when I installed feels not sturdy.
@@_Florin looks like a design flaw 😒, there is plenty of clearance to Base. Maybe that's why the Axkid is not commenting anything about it.
REEEEEEEEEEEEEEEE
ну ну, посадить бы разработчика этого чуда сюда, чтоб коленями в подбородок упёрся
Axkid minikid einbauen
Silly filter on this video is actually making it very hard to see as it's too dark🤷♀️
Insane removing... That od some f...king Joke..
jag har en citroen c4 undrar om det går att montera stolen i den????